Complete Gearbox for H&K Umarex Elite Force UMP Series Airsoft AEG

"OK! For ANYONE WHO IS BUYING THIS PLEASE READ THIS:

This fits a ump45 ELITE, I'm not sure about the competition variant, but this is the replacement gearbox you may want to use. HOWEVER the selector does not work due to the selector not mechanically lining up with the plate. However, the mechanical safety locks still operate. I but a dual sector gear in here, and it didn't explode, so its safe to say that this gearbox is OK. Compatibility is an issue with the fire select however it fit just fine. THERE ARE SOME THINGS TO NOTE:

The motor cage adjustment screw for the motor can come lose IF NOT ASSEMBELED RIGHT. This gearbox is also NOT COMPATIBLE WITH A GATE ASTER V3, and does not look like it would fit a TITAN either. The internal design for this gearbox differs. With some difficulty I manage to use a plug and play WARFET and barely managed to fit that in along with a tiny 7.4v Lipo.

Thank you for reading this!
Overall this gearbox is good. I've been through a day of play with it and it didn't let me down when I put a DSG in it.

"I'm re-building My BE Civilian Styer AUG. I know that this is meant for the UMG A.E.G, but I used it in my BE Civilian Styer AUG body. I Had to trim the trigger to get it into position, but it fits pretty easily and firmly. I am still waiting on my tight bore barrel, and 9.6v 2300Mah to come in so that i can test the FPS, ROF, and the accuracy. I'm using a Star 6.05mm Inner Tight Barrel for G3/M16/AUG. (495mm). I'm planning on leaving the stock hop up in the gun, but may eventually upgrade that as well. If any one has any affordable upgrade suggestions(other than getting rid of the gun entirely) Please email me. [email protected]