Modify Baton Ryusoku Flat Hopup Bucking for Airsoft AEGs (Model: Soft)

"LOVE this setup with 410mm 6.03 barrel, R-Hop, ProWin Hopup, solid cyinder and M130 spring on my Valken MKIII SPR build.

Cannot go wrong with this Flat-Hop bucking and nub. Thinking about trying the Omega, Panthera or other concave nub to see if it makes a big difference...

"SOFT BUCKING.

Fine bucking for moderate accuracy and distance improvements. However the bucking may rip a little from the nub if you use it on an AEG over 1.2J with heavier BBs. That being said, it's a universally great upgrade to have if you had to upgrade anything.

"This is a must-have upgrade for any stock airsoft gun.

This fits any M4 within reason. I have used about 4 of these. Use the soft for indoor (.20's) and hard for anything above (.25s).

This is a super easy mod that takes less than 15 minutes and does increase your range a bit, I don't have an exact number, you won't be shooting the moon or anything but it is very noticeable. Just put one in thank me later.

"Let me start saying that this is one of the Best buckings on the market, is quite consistent over a madbul or even a Maple leaf, is overal cheap if you consider de prommy purple and the namazu flat nub, get one of this and you won't regret this purchase, i also like the combo with Orga barrel

"This is an amazing and consistent bucking. I consider a flat hop a must have if you want to improve your stock airsoft gun's accuracy, and this bucking/nub combo works great. It makes fighting at long range so much easier. I definitely recommend this over a Maple Leaf or similar.

"This thing works awesome with the maxx me pro. Best drop in flat hop there is and I know I’ll be coming back for some more when I get some more guns.

"Modify Hop Flat or Soft
Is a Modify
Buy it the best of the best

10/10???
NO
15/10

"Very good, will make your gun shoot surprisingly far when installed properly. I always turn to this for a first upgrade. Also for website admin, the packaging is always horrible and I end up having to dig through the box it shipped in to find the nub bc it fell out of the original package. Yall just need to put a little tape on it or something before shipping so it doesnt fall out the box entirely

"very consistant and stable hop for my DSG setup. easy to install and performs very well

"In my previous review of this product I rated it very low due to a poor performance. I now know that was a human error on my part. I had not realized that my hopup wheel was too loose and would spin when the BB hit the nub. This would cause a few shots where the hop up was good, then the hop up would be turned off completely. Then I would turn the wheel the whole way up. This would cause the wheel to become immobile to the force of the BB, but it would cause a huge overhop. Using my trusty Scientific Method I deduced this issue and experimented with the use of washers to tighten up the wheel. To my amazement adding a single tiny washer solved all of my issues. My gun now can reach out and crush someone when they think they are out of range. When I corrected my error this upgrade became a huge improvement to my stock, misfeeding, erreratic Matrix SR-25. I highly recommend that you buy this upgrade and I hope that my mistakes can help you out.

"Fantastic results!

Gun: VFC Avalon Carbine
Ammo: EliteForce 0.32g
Spring: Stock, running around 420 fps on 0.20g
Barrel: Stock
Hop-Up Chamber: Stock

My Avalon came with a Maple Leaf bucking as a stock bucking and the results have been more than acceptable, however, it started showing signs of inconsistent hop as i moved for bb weight heavier than 0.3g. Trajectory became too parabolic, there was a noticeable lack of hop.
As i increased hop pressure the bbs lifted and started rising over, having a weird path and groups became too wide for my taste. The Maple Leaf works very well but there is a weight limit. 0.32g is well beyond it.

Then i tried this Flat hop bucking:
The install was not so simple. The Hop-up arm on the Avalon has a clamp design and the Baton Nub is too shallow to get secured by it. On tech pages some people milled their Nubs so it woud fit, some others said a Namazu firefly was a better option.
I didn't do any of these options. As i instaled the bucking in the barrel, some silicon lubricant is necessary because the bucking is 2mm longer than the normal so be careful to not stretch it otherwise it will interfere on the clamp (some people cut it, i was careful and cutting was unnecessary).

After the bucking was in place i simply droped the nub inside the chamber gap, just dropping it over the bucking, totally loose over it. Instaled the chamber arm right over it, the arm clamp design secures it in place...

And to my surprise it works wonders. No issues at all and the consistency improved alot. With my red dot i can hit coke cans easily 30m away now. The bb path became alot flatter and groups thighter. My next upgrade will be using this bucking and nub for an R-rop.
I will buy more of these to improve my friend's guns as they noticed my gun was incedibly superior to theirs in precision. I barely use full auto, it became alot less necessary. i can land hits on oponents 30m away without showering bbs over them now.
If you can tech properly and can handle yourself, get these.

"Best upgrade so far!
Paired it with a No-Sanding RHop with Prommy 6.03 TBB, and my Krytac shoots like a SSG24. Hitting ppl at 280Ft!
The whole setup is so easy, just drop in n play. Took only 20min. Totally made my day!

"This is my go too bucking for all airsoft guns now. It is great, I even prefer it over the Prommy purples

"I have just started r-hopping my guns and the hard bucking works flawlessly. Will be using these on all of my r-hopped guns!