G&P M120 High Performance High Speed Airsoft AEG Motor - Long Type

"Ok so I put this motor into my jg sr16 with a 9.6 3000 battery i am getting a little over 20 rounds per second its a really great motor and i would reccommend it! I will say though that reinforced gears are a must!

"my gun was shooting about 9 BPS.
Im using 8.4 and standard gears, raised my rof to 21.

out standing. slipped right in. I had no idea upgrading a motor could make such a differince.
super happy!!!!!!!!!!!!!!!!!!

"I have to agree that this motor will produce high ROF. I had a M249 PARA SAW and put this motor in it and it cranked out 23 bps...great motor!

"Robert. The systema magnum is a "torque up" or "super torque up" motor. Magnum motors have "TORQUE" gear ratio that give it power to pull strong spring.

This is a "high speed motor". Thats why the rate of fire should be higher by default.

(Think like cars....the up hill gear ratio is slower, but with more power. THe down hill gear ratio is faster, with little power.)

"22RPS? Are you sure about that? Because that beats the systema magnum into a pulp. Do you have the readings that you can show me or anything?

"People say not to run a 3 cell lipo but I have been running this motor for two seasons with a 50c burst 11.1 and it's great. Fast trigger response. Just gets a little hot with mag dumps.

"This motor has some horse power and rpm. It's not the fastest, but it's not the slowest either.
Fits and works perfectly in a (echo 1 gearbox) P90 with the exception of the pinion gear. It's a little smaller, sharper, and more brittle than most pinions and does not work with most bevel gears out there.

"I just got this motor for my M4 and its amazing! It has a very healthy rate of fire and a good amount of torque. However, the pinion gear didn't work with my SHS 13:1 bevel gear so I had to use the stock bevel gear. Also, the part where you connect the wires to the motor is a little thicker than normal so I snapped my motor connector trying to get it onto the motor... still have to get that fixed... Aside from that, this motor is a good purchase and I would recommend it for a high speed setup or just a simple little upgrade!

"This motor came standard on a g&p m14 I purchased about a mont ago. It worked great for about 4 or 5 games when all of the sudden the pinion head stripped. other than that it was a good motor. It gave me about 20 rps when it worked. If you buy one i would recommend getting a better pinion head.

"Ok so this motor is fantastic! The speed is awesome but there is one problem i had with it. The pinion gear (the little gear attached to the end of the motor) stripped after about 1000 rounds. I would recommend buying the guarder reinforced pinion gear for it. It is still a great buy, and it performs like a 100 dollar systema motor!

"Mixed review on this motor. When the motor works it is great.

I have two G&P guns. With my SAW the motor locked up after around 20k rounds. Replaced it with another and have run ~10k through it no troubles yet. With the M4 I've easily put 50k+ rounds through it with a mix of 7.4v lipo and 11.1 lipo and no problems other than the pinion head wearing down to a nub. I would recommend picking up a spare pinion head if you buy this motor.

I've also used the short type in an AK and had nothing but trouble from it. It stopped working after a few months of light use. Only using a 9.6v battery there.

None of the guns have over an M110 spring in them due to local field restrictions. Not sure if I just got the duds of the lot, or if there is some defect in the design.

"This is a great motor I use a m110 with mine and a 11.1 lipo but it will just wear down rally bad and will pretty much turn into a stock motor after some usage ( mebay around 100k rounds) over all it's grat onion gear not best would rather go with the matrix turbo I have it now and it's Better really worth the couple extra dollars

"Good fit in my amoeba 008, but after few shots the pinion worn out. It lasted only one day game. I was running with 11.1 Lipo and M110 spring in semi.
I am going to change the pinion and hope this motor stands longer next time.

"So i got a g&p /knights armament m4 and with this motor in it and a g&p 11.1 lipo i was getting 33.3 rps unfortunatly it lasted only 5000 rounds and locked up ! So im undecided at this point ...

"may of just got a lemon, but with the prebuilt g&p, it overspun with 11.1, causing double feeding with semi, and also locked up within the first 4 hours of game time.