EMG Barrett Fieldcraft Airsoft Precision Bolt-Action Sniper Rifle with Featherweight Zero Trigger (Color: Multicam)

"First off, the body of this gun is very well done. The wood feels good and the receiver/barrel are solid. The rail was too small to fit my scope, so I got replacement rail. I don’t know how other reviewers are getting high fps readings, because mine was shooting OOTB at 400 with .20’s. So just keep that in mind. I did end up getting a stronger spring, which helped it out. You’ll probably want a new hop up bucking as well, since mine does not consistently hop (pretty sure it uses an AEG bucking). I took it to a shop for them to remove the orange tip and they struggled a lot, so I wouldn’t try it by yourself (unless you’re used to that sort of thing). Overall it’s a great gun; highly recommend.

"So far, everything has worked perfectly including the hopup with .40g bbs, the top rail can be replaced with any vsr10 rail, swapped mine out right away with a longer rail for a smaller scope and an optic shield. I don't know where they got the fps but mine out of the box was firing 470fps average with .20g bbs. Kind of a bummer because my local field allows 550fps for bolt action rifles, guess I need to upgrade.

"Good rifle, shoots far and hard, the spare mags that come with the packages do not fit in the gun easily, and you have to get them out with pliers.

"WARNING READ BEFORE BUYING: the internals are a plastic cylinder and a plastic spring guide rod what I am saying is I put probably only 10-15k rounds through this before the guide rod snaped. I ended up buying a new metal guide rod and you will never guess what happened the spring didn't fit I don't know if it was the guide rod or the spring but I shaved down the guide rod and put another 5k round through it then the piston head formed a crack. and the hop up unit also started to stop staying in the same place and the "clicking' stopped and it would just move back to the stock stop. I ended up buying a good hop-up unit then I had to replace all of the piston internals. before you buy this gun you need to get better parts for it I used the Noveritsch parts and it works great now but it's kind of annoying that they are still using plastic parts for the price of this gun it looks amazing just bad internals.

"Gun is very light. Lighter then expected. Rail above bolt is very small. Alittle difficult to fully seat and mount optics. Mag wobbles in mag well. Spring holding mag release pops out alot and doesnt always feed properly.
Not many tutorials regarding assembly and disassembly. Do not tighten the bolts too much or they will snap the plastic stock mounts. Bolt pull is stiff even with CLP and a m130 spring in it. Better off getting an SSG10

"This gun is okay for the price my friend bought it on epic deals just to give it a try my first impression is the material it’s made out of feels cheap compared to the ssg10 and the range is terrible for being a “high power” sniper. It can only reach about 100 feet and it’s not accurate at all at that range. The max bb I would use is a .28 I tried using .35 and it’s range was severely decreased. Over all I give it a 3/5.

"Just got mine last week and the build quality is ok the body feels like decent plastic. The real main problem is that it will double feed and jam the gun about 15% of the time. But on the other hand the trigger has a smooth pull to it and the cylinder glides easy, also the range and accuracy is great for the price. Overall I'd say that this sniper is worth it if you can fix the double feeding.