Angel Custom "FPS-UP" Mock Silencer (115mm with 6.01mm Inner Barrel) (Version: Only Easy Day / 14mm Negative)

"This silencer is amazing! I installed it to my WE HI CAPA and with the extended 51rd mag, the gun looks like a monster! It also increased the range and FPS of my pistol tremendously!

Pros:
Looks amazing!
Angel Custom is very high quality
FPS and Range increase
Easy to install
Comes with a tight-bore inner barrel

Cons:
The price is a bit high but for what you get its worth it!

"I put this on my CZ licensed P-09 from Evike. I’m sure it’s a great product, haven’t tested the FPS alter yet. But it does often lock the slide back when I rack it and I’d have to push the slide forward with just a finger or so

"Got this for my WE 1911 KB custom.

pros:
Looks kool
nice weight
extended my range by about 25-40 feet

Cons:

If it is not screwed on ALL the way then the barrels wont line up and your BBs will go about 10 feet. So screw it on tight

"I bought this for my WE 1911 and immediately noticed that the spring in the suppressor was pushing back my inner barrel and not allowing my slide to move, it was also making my outer barrel rub on the inside of the slide and taking the paint off
I think I either need a weaker spring inside the suppressor or a stronger recoil spring to push the inner barrel back to where it should be to allow the slide to cycle properly

"PROs
-Solid Construction
-Sleek Design
-Fits wells
-Looks tacti-cool

CONs
-does not seem to work on several pistols I tried
-looks cool, but actual LOSS of FPS on two pistols tried

Granted, it might be the two pistols I tried but It did not work for me. It actually lost FPS when attached to the 2 pistols I tried. The idea behind it sounds like it will work, but I guess you need the right pistol to get it to work. I will try and test it on other pistols to see if it works.

"Tried it on two guns and actually lost about 20 fps, would only recommend this for somebody whose gun is shooting just a little too hot. Otherwise seems to be great quality!

"Now when I purchased the this item I was pretty excited for how it might perform, BUT so far it hasn't even worked for me. Now given I've only tried it on two gas blow back pistols but it just seems to have issues. Firstly, the thread size is pretty short so I often find myself left with a TON of thread space after I screw it on tight. Now when I tried it on my Echo 1 Timber wolf the BB's will shoot properly and cycle properly but I found that the BB's acted as if they had absolutely no Hop-up and would end up only traveling barely 20+ feet and I haven't had this problem with ordinary mock suppressors; I tried adjusting the hop up but it would end up with a similar result. On my ASG CZ P-09 with C02 the BB's would shoot straight but the gun would not cycle properly at all, now given most mock suppressors don't make the CZ P-09 cycle properly I found this even more apparent as every shot after the first one wouldn't cycle back. Lastly, there is no way to tell if this barrel of this locks in with your suppressor, and I've even attempted to adjust the barrel.

SO in conclusion:
Barrel Threading is way too short and you'll end up having a crap ton of thread space left.
The Suppressor itself is pretty heavy in comparison to other mock suppressors.
Wouldn't Even work on my Gas pistols so I don't even know if it actually increases FPS.
There's no way to tell if the barrel of the suppressor is lined up with your inner barrel.

"Now when I purchased the this item I was pretty excited for how it might perform, BUT so far it hasn't even worked for me. Now given I've only tried it on two gas blow back pistols but it just seems to have issues. Firstly, the thread size is pretty short so I often find myself left with a TON of thread space after I screw it on tight. Now when I tried it on my Echo 1 Timber wolf the BB's will shoot properly and cycle properly but I found that the BB's acted as if they had absolutely no Hop-up and would end up only traveling barely 20+ feet and I haven't had this problem with ordinary mock suppressors; I tried adjusting the hop up but it would end up with a similar result. On my ASG CZ P-09 with C02 the BB's would shoot straight but the gun would not cycle properly at all, now given most mock suppressors don't make the CZ P-09 cycle properly I found this even more apparent as every shot after the first one wouldn't cycle back. Lastly, there is no way to tell if this barrel of this locks in with your suppressor, and I've even attempted to adjust the barrel.

SO in conclusion:
Barrel Threading is way too short and you'll end up having a crap ton of thread space left.
The Suppressor itself is pretty heavy in comparison to other mock suppressors.
Wouldn't Even work on my Gas pistols so I don't even know if it actually increases FPS.
There's no way to tell if the barrel of the suppressor is lined up with your inner barrel.

"I am very disappointed with my purchase. When I fired my first shot, the bb dove straight down after ten or fifteen feet. The second shot never came out, and all the others shattered with the pieces flying out of the barrel. I'm using this silencer with a WE 4.3 Hi-Capa, and I would not recommend this product with anyone with that gun.

Webmaster:
From your description it sounds like the following will help.
Detach the cap, and tab on the internal lock a bit to adjust the inner barrel position to make sure it is centered. This will align your GBB's inner barrel with the inner barrel on the device, and the problem described above should be resolved.

"Honestly i should have took the other reviews more into consideration.. Connected to my stock barrel it feeds perfect i think its its 6.03 mm but with a 6.01 inner barrel it kept breaking my bbs.. It also does give u and fps boost but it shoots them everywhere very inconsistent and u have to have your hop up all the way up or it won't go 2 far

"I installed this on two different GBB pistols and it continued to shatter BBs. I looked down the barrel and found a small gap both times where the barrels were not even touching so I modified the spacers so they would. No luck the bbs still shatter and as such I will not be purchasing anymore angel products. With that said Evike is great as usual and all the products I ordered came on time.

Webmaster: Your pistol must have the inner barrel configuration optimized like the big brands. We have done test on the major brands. What brand is your pistol. If your inner barrel is way shorter / too short on the inside, then what you describe will happen. This item works for WE, KJW, KWA, Elite Force, KWC, Tokyo Marui and other major brands.