Matrix Hardshell Adjustable Holster for STI Hi-Capa 2011 Series Pistols (Type: Black / Belt Attachment)

"Hilariously does not fit STI DVC 3-Gun 2011 style Hi-Capa parts without modification. For all intents and purposes, this is effectively a SERPA holster, but very inexpensive, and uses a circle index mounting system instead of multi-position screws. I like it, it's held up to several games without dumping my Hi-Capa on the ground.

"Got this for a AW HX2302 and it's a really thigh fit. It seems that it gets tighter by the end point so the slide gets pulled behind, enough to pull the hammer all the way down.
For now I have to hold the back of the slide while holstering to keep it in place. I believe the holster will loosen up with the use.
Material looks pretty good and durable. Mount is also as good as expected.

"Stock TM Hi-Capa fits nice. Adding a new metal slide increased the width of the slide which makes it too tight to use. Easy fix by either sanding down the inside or down the slide. Also fixed my heating up the plastic then fitting the new slide to it.

The Molle attachment part doesn't work too well. The top clips come out of the molle strips on my belt leaving it hanging.

"This Holster is Great for the 2011 Hi-Capa Pistols of any Brand it fits all of them perfectly, However, what it does not fit is the EMG / Salient Arms International 2011 DS Pistol, the base just above the Trigger is to wide to accommodate the narrow form of the holsters, so if you plan on getting this product for that Pistol, I wouldn't suggest it, if you plan on getting it for any other 2011 Hi-Capa, the price, style, functionality, and look of this Holster is perfect for it.

"Works great but EXTREMELY tight I had to file and boil mine to get it to fit snug but not hulk strength.

"If you are buying this for the SAI 4.3 2011 it does NOT fit i'm not sure about the 5.1 but I don't think it will either.
but overall it is a nicely built holster

"I have this holster for my KJW KP-06 Hi-Capa with the Molle attachment. I own another one of these style holsters for an M&P, so I knew what I would be getting. It works exactly like it should, but it is very tight on the slide, with my other holster, I can just drop my M&P into it and it locks right into place, but this one sticks about halfway down because it is so tight. One fix for this that I heard from my local tech is to wrap some paracord around it to make it wider (because it is plenty tall), then put it in your oven at a very low temperature, like 150 degrees or lower. A good thing to do is just to set your oven to its lowest temp, then as it cools, put the holster in around 150 degrees and then leave it there till your oven cools to room temperature. That said, it holds it nice and tight with no wobble, except the wobble from the frame and slide. It draws out nicely as long as you are deliberate about the action. I would definitely recommend these holsters and their attachments. I own the paddle, molle, and the drop leg mounts, which work very well for their purpose.

I'm going to give it 4 out of 5 because it is very tight on the slide, but that can be fixed by continued use or by the steps I mentioned earlier. Other than that, I highly recommend these holsters and their corresponding attachments.

"These holsters are great! I have the standard 1911 one for my ef 1911 tac. However I bought this one for my kjw hicappa and it doest fit. I will work but you really have to jam it in there and it really snug to get out.

"This did not fit my we hi cappa. However, it does have a potato masher on the end so take it with a grain if salt. This did fit my 1911 tho.

"Although this holster fits my pistol perfectly I was disappointed to see that the belt attachment point does not break open. What I mean by this is that it is not possible to fit it on my belt because there’s no way for it to slide on. Looks sturdy but unfortunately I will probably have to wait to be able to use it now.

"I bought this for my EMG SAI Hi-CAPA and even though, in the gun's description it says that holster fitting is restricted and to only use holsters in the "you may also need section," I could barely get the gun into it, but was unsuccessful in getting it out. I had to head up the holster with a heat gun (mind you, this is much more powerful than a hairdryer) to make the polymer more pliable in order to get the pistol out. At this point, I let the holster return to room temperature to see if the gun would fit better, seeing as I remolded it. Still no luck. I'm still trying to find a holster to fit this gun perfectly, as I'm using a nylon one right now. If anyone finds a holster for the EMG SAI Hi-CAPA please leave it in the comments section. Thanks!

"Good quality. But, will not fit SAI 5.1 2011. They need to stop suggesting this item as "you might also need" on the SAI 2011 page...

"It works, but it needed to be sanded down a lot. I had a WE Hi CAPA cqb master

"This product works great if you don't have installed a rail in your hi-capa.
It doesn't fit with it. Maybe there is a way to actually do it by changing the inside of the holster

"Holster did not fit the EMG Salient Arms 2011. I am enjoying the drop leg platform that i ordered with it, but i have switched back to my old 1911. I would recommend Evike double check this holster compatability as other reviews also suggest a lack of the advertised compatability.
I will be looking for an alternative.