EMG / Sharps Bros "Hellbreaker II" Licensed Advanced M4 Airsoft AEG Rifle (Color: Tan / 10" SBR / 400 FPS)

"ive had this gun for about a month now and its really good overall.

pros.
good fps
very light
durable
great gearbox


overall its a very good gun!

"Though I do wish the 7" barrel was available for indoor CQB, the size and weight of this gun is amazing. The Hellbreaker is weighted very well where the center of mass is where the motor grip lies. The Keymod aspect is another great feature that allows for a tight grip without cutting your hand. Because it has a quick-change gearbox, simply buying is cheap buffer tube tool and a new spring is to die for when playing in different arenas that limit a gun's FPS. All-in-all, the aluminum bodies lighter weight and textured rubber grip combined with free instructional videos about this gun on Youtube under "EMG Arms" make this out of box ready gun a good buy.

"I have had the this gun for about 2 weeks and I love it.

Pros
Great trigger response with an 11.1 Lipo
Accurate out of the box but I put a madbull 147mm tight bore barrel in
Range is good I flat hopped it and WOW this gun shoots 200+ feet

Cons
It's only takes mags that are flat on the side like G&P mags
It does come with keymod pieces but that's fine

"Great Shooter! Would recommend any day

Pros
Awesome trigger / trigger response
Accurate
Great fps confirmed at evike b4 i purchased
Lookes great
Lightweight for full metal

Cons
Only standard m4 metal mags work with magwell (no kwa/bamf or other composites fit)
Off size barrel 380 makes upgrade kinda hard

"Well after having the gun for a couple days I don't have any real complaints. I'm very happy with it overall. I will say that when set to 3 shot and full auto it seems to use a battery faster than other guns. For now the gun is stock with the exception of a 510mm 6.06 barrel. Compared to the stock 380mm 6.08 barrel(I believe that's what the bore diameter was). The gun seems to like whatever magazine I put in it and is extremely fast. Now as for the fps....don't expect the 435 to 450 that is claimed. With the 380mm barrel I got between 409 and 411fps with .20 bb's. I have not checked it with the 510mm barrel but just from shooting it I can say the increase in range is noticeable. I have noticed that the motor heat(in the grip) is a little more noticeable than some other guns. All in all I'm very happy with the gun and would buy another one.

"This is a good beginner to advanced level gun. Its also a good non-upgrade gun because it is already upgraded. The trigger response is amazing. Mine shoots about 380fps with a 9.4 battery and 0.25g bb. Even though the barrel length is average it is really accurate. Overall, I would definitely recommend this gun. 5/5- Wayne

"The ARES Ameoeba CG10 as a beginning to intermediate level gun impressed me, having not played much airsoft before, when I purchased this gun I was impressed at the build quality of the weapon. This gun is very much like the Elite Force M4 CQB / ARES Amoeba series but the internals seem nicer. The rail system made this gun very well balanced and the receiver is awesome. I was impressed that the gun was very accurate for me having briefly switched sights.

PROS:
The weight is well balanced
The front iron sight is easily put down to allow for optics of any type
The receiver is unique and not "generic"
The gun is solidly built
Crane stock is very well designed
Gun comes with a well build well designed magazine
The hopup unit is easily moved and is pre-set for 20-50 feet engagements
Gun is very accurate with .20 gram bb's
Micro switch trigger for faster trigger response
Mossfette
and the list goes on


Overall this gun is great for beginners who are looking for a great gun to start them airsofting. Is very accurate even at night games, and for being made of metal the gun felt solid in the hand. Overall this is a gun I would recommend to anyone!

"I would like to start off by saying that this gun ROCKS! Me and my friends like to be different so this gun is good for people who want a reliable M4 platform but look a bit different. I was going to get the longer Hellbreaker(the 16 inch), and I was devastated to not get it when it was out of stock. I guess it is okay because this gun is a beast. All the new Hellbreakers are the same internally (except for barrel length) so they are pretty consistent so any of the three new are basically the same. I am a CQB player so this is perfect. This gun shoots great for me and my playing style and field rules. My particular gun shoots about 380 FPS with .20s which is fine for my field but might be too hot for some CQB fields. Let's get into pros and cons;

Pro's:
-Same and more reinforced internal than the ARES Amoeba!
-Cool Looking
-Sounds Great
-Different than normal M4's
-Shoots Like a dream
-Great Price
-People ask you what model it is
-Solid
-Easy to handle

Con's:
-People might no like me for saying this, but it is just another M4

This gun is great so I give it an overall recommended 9/10. If you have the chance, get it!

"I really like the lower achiever of this gun contradictory to many of the comments but that is mostly because I am an airplane buff and the face off of the P-40 warhawks really spoke to me. The gun is great It is everything i expected from an EMG there is one thing that maybe I wouldn't call cons but just wanted to put out there. the trigger response i great but there isn't much give after that so if you are looking for a super realistic trigger than this may not be the gun for you. I like it because it really helps with a trigger finger. The only problem I've had with it so far is that the screw on the bottom of the buttstock that held a small thing that you would pull to get the stock all the way off to put in the battery came off. i can still move the stick from position to position but taking the stock off is hard, but not impossible. I used my belt buckle to pull down that thing that the screw was holding on too and then i could pull it off. I plan to buy a replacement to make my life easier but others that that this is a great gun,

"This gun is very good it has a decent fire rate probably about 15-20 rps and its very accurate. Don`t ever try to modify this guns gear box I learned the hard way I tried to install a modify Dual sector gear but since it uses an ares mosfet it ruined the gun. but I am getting it fixed so if you mod this thing take the mosfet out. when I got the gun the hex screw was stripped so it was a pain to get out so overall dont get this gun if you plan on upgrading it. but for being right out of the box it is really good

Pros:
-very accurate
-good quality
-descent rps
-good for the price
-light weight

cons:
-you cant really upgrade the gear box
-there are no manuals or videos to help you take it apart

"I got the gun, and its amazing, but it came with a M-loc barrel instead of keymod. Im pretty dissapointed because I bought keymod attachments and I guess I'll have to return them.

"I got the carbine (15") version. It's very nice for a DMR setup. Love the stock and motor grip. The motor grip feels amazing. The ROF is pretty solid with good AEG internals. I upgraded it with a Prowin hopup and an Angel custom barrel with a flat hop to increase its accuracy. I'm giving this gun a 4/5 since the magwell is very picky. I can't put any kind of polymer mag into it. I tried PTS EPMs, BAMF, etc. The only mags that fit and feed well are the 6mmProShop ones you can find here on Evike and Dboys. I would go with the first option.

"Finally got this gun in the mail after 6 days when I bought three day shipping!!! Pissed about that but other than that the gun has excellent trigger response, nice rof with 11.1 lipo, and good sturdy build. I was a little shaken cause my gun only came with the front flip up sight, the rear wasn't there or anywhere in the box. Also a little mad about that cause that's 35 dollars I have to drop on new sights. Also, my G&G 120 round mid caps won't fit nor will my angel custom ap10 mag converter. I'm trying to get help to find out what mid caps I need for these mags. I'll update when I find out cause it'll be a heartbreaker if I have to buy a variety of mags. But overall it's a great gun would recommend it to anyone.

"Bought this gun as a platform for a DMR, so far I'm rather pleased with its performance and construction, has easily handled an M130 with stock internals, which are amazing if you are unfamiliar with Amoeba gearboxes.

The grip on this gun is sexy, it feels great and somewhat resembles a magpul grip, it mighht be a little thick for someone with smaller hands but for me its perfect.

However when i received the gun it was EXTREMELY dusty and dirty, i could not believe how dirty the inner barrel and inside of the hop up unit was, it looked like they assembled the gun in a pile of black dust. I have yet to open up the gear box and see what it looks like inside simply because i do not want to until i have a problem.

Another thing, many external parts were lose when i received this gun, my motor adjustment screw was so loose in fact, it fell out on the field and vanished the very first game i used it.
i really like the stock this gun came with and to access the quick change spring you only have to remove the stock which is very convenient (other guns require the whole gearbox to be removed before being able to access the QC spring)
THIS STOCK REQUIRES AN AR-15 tool to tighten the stock (its IS an AR-15 Training rife after all) that could be either good or bad depending on your preference

Over all i would recommend this gun and this mag package (mags fit very snug and have given me 0 feeding problems to date) Is a solid platform and out of the box is very solid minus the things i mentioned above. If youre looking for a decent rife this might be the choice for you.

"I just received this gun, it seems solid, my only gripes so far is the magwell is a bit loose, even with the high cap that came with the gun, and they send a replacement flash suppressor, but the one that comes on the gun is epoxied on SOLIDLY, i had to break it and cut it with wire cutters to get it off. Other than those few things, i really like the gun, not sure the lipo i have is going to work, its a buffer tube type, but it is really tight. So far it looks and feels great.