(626) 286-0360
Airsoft
Fishing
Air Gun
APS XTP Black Hornet Full Auto CO2 Powered Airsoft GBB Pistol (Color: Black)
22 Customer Reviews
by Seane B. on 01/29/2018
"This is an amazing gun made by APS great recoil precision accuracy full metal slide glock like body very comfortable to hold slim long design hi mag compacity Great CO2 system and amazing fiber optic sights not to mention it's only $89 what a steal
by Jared B. on 09/02/2017
"There are a few things you should know before you get this gun. First, you need to understand how to disassemble a glock, second, you should only switch firing modes when the slide is back, otherwise the gun gets damaged, and third, grease the hop up toggle mechanism, cause it's difficult to adjust if you don't.
Pros
Incredible trigger response
Good recoil
Easy disassembly
Good fps for most situations
Good accuracy on semi auto
Very ergonomic
Metal slide
High fire rate on full auto
Cons
Accuracy is meh on full auto
The hop up toggle mechanism is a plastic gear
If you like the new look, then the paint scratching off might be a con
Placement of the safety requires using your off hand to activate the safety
Sometimes the mag leaks after shooting in quick succession, the way to fix it is to release the mag, then put it back in the gun
The hop up is difficult to adjust if it isn't greased
I can't say much about range just yet, cause I didn't get the hop up to be able to be adjusted until recently, but so far, I have got about 95ft without being able to adjust my hop up.
Pros
Incredible trigger response
Good recoil
Easy disassembly
Good fps for most situations
Good accuracy on semi auto
Very ergonomic
Metal slide
High fire rate on full auto
Cons
Accuracy is meh on full auto
The hop up toggle mechanism is a plastic gear
If you like the new look, then the paint scratching off might be a con
Placement of the safety requires using your off hand to activate the safety
Sometimes the mag leaks after shooting in quick succession, the way to fix it is to release the mag, then put it back in the gun
The hop up is difficult to adjust if it isn't greased
I can't say much about range just yet, cause I didn't get the hop up to be able to be adjusted until recently, but so far, I have got about 95ft without being able to adjust my hop up.
by Taylor A. on 08/23/2017
"This is a great sidearm
Pros: it's light weight, it fits in my hard shell glock holster perfectly, very accurate, easy fire mode selector, durable, it's easy to take the slide off to adjust the hop up or add oil or grease or any maintenance it needs, mags are inexpensive, they hold a decent amount of ammo, sights are glow in the dark, and I can shoot about 3 full mags (maybe even 4) with one co2 cartridge.
Cons: the full auto setting isn't dead on accurate, (but if you fire a quick burst in the general direction of your target, it's almost guaranteed you'll hit it.) And this might be a minor avoidable con with most gas powered pistols, but after you have used the mags quite a bit with a lot of rapid firing in one day...the gas will freeze in the magazine , not allowing you to shoot any rounds until it's at a warmer temperature. Unfortunately you can't take out the co2 cartridge until it's empty...and when it freezes it's hard to tell if it's empty. I'm pretty sure this is just a minor, fixable or avoidable problem. And sometimes the slide will stick but that is very easy to fix, just add some lubricant.
oooverall, this is a fantastic sidearm, shoots great, it's durable and for the most part reliable.
Thank you Evike!
Pros: it's light weight, it fits in my hard shell glock holster perfectly, very accurate, easy fire mode selector, durable, it's easy to take the slide off to adjust the hop up or add oil or grease or any maintenance it needs, mags are inexpensive, they hold a decent amount of ammo, sights are glow in the dark, and I can shoot about 3 full mags (maybe even 4) with one co2 cartridge.
Cons: the full auto setting isn't dead on accurate, (but if you fire a quick burst in the general direction of your target, it's almost guaranteed you'll hit it.) And this might be a minor avoidable con with most gas powered pistols, but after you have used the mags quite a bit with a lot of rapid firing in one day...the gas will freeze in the magazine , not allowing you to shoot any rounds until it's at a warmer temperature. Unfortunately you can't take out the co2 cartridge until it's empty...and when it freezes it's hard to tell if it's empty. I'm pretty sure this is just a minor, fixable or avoidable problem. And sometimes the slide will stick but that is very easy to fix, just add some lubricant.
oooverall, this is a fantastic sidearm, shoots great, it's durable and for the most part reliable.
Thank you Evike!
by oliver h. on 05/10/2021
"Ok overall a pretty good gun i had a problem where my outer barrel broke but evike fixed that rite up and even if they hadn't APS sells new barrel for like 12 bucks if you want it buy it. P.S. if uou short stroke this thing you can turn it into a bb hose.
by Antonio R. on 03/21/2021
"It is a very good co2 gbb it has full auto and it is made high quality
by Damon L. on 06/18/2020
"Let's answer some questions!
The threading for the barrel is reverse thread measuring 11.70mm so I would say 12mm.
Mine chronos around 323 fps with 0.20g BBs coming out to about 0.97 Joules. Accuracy is fine as it will probably out shoot you.
Loaded with a CO2 cartridge and BBs, it weighs 822 grams. For comparison, a fully loaded real steel Glock 23 (40 cal) weighs 898 grams.
For those of you who have issues with the magazine, it's plumbing 101. Sealing surfaces have be clean and smooth. The magazine bore where the o-rings seals is painted and even when new, you may see chips! It will definitely chip more. Take some acetone and clean off all the paint in the bore only. You will find that the machining is quite good so it should seal. The other thing is the the supplied o-rings are 2mm cross section (CS) and 16mm I.D. but based on the dimensional parameters of the magazine and cap, o-ring calculators suggest that a 2mm CS and 17mm I.D. o-ring is more suitable. I have yet to test this but am planning to. It should be noted that after cleaning the sealing surfaces, the magazine cap does not leak with the stock o-rings. Also because they are sealing surfaces and the tolerance are tight, extreme care must be taken no to scratch them!
Also, there have been some design changes compared to earlier versions people have reviewed around the internet. The Hammer roller mis-alignment issue that may bind the slide has been changed to an eccentric cam. My current copy has no issue with the slide binding. The lower mechanicals look to be decently machined but the slide guides they are housed in are not and are of a lower quality alloy.
All in all, it is a decent pistol for the price when on sale for $95; so much so I recommended it to a friend.
Stay safe and happy shooting!
The threading for the barrel is reverse thread measuring 11.70mm so I would say 12mm.
Mine chronos around 323 fps with 0.20g BBs coming out to about 0.97 Joules. Accuracy is fine as it will probably out shoot you.
Loaded with a CO2 cartridge and BBs, it weighs 822 grams. For comparison, a fully loaded real steel Glock 23 (40 cal) weighs 898 grams.
For those of you who have issues with the magazine, it's plumbing 101. Sealing surfaces have be clean and smooth. The magazine bore where the o-rings seals is painted and even when new, you may see chips! It will definitely chip more. Take some acetone and clean off all the paint in the bore only. You will find that the machining is quite good so it should seal. The other thing is the the supplied o-rings are 2mm cross section (CS) and 16mm I.D. but based on the dimensional parameters of the magazine and cap, o-ring calculators suggest that a 2mm CS and 17mm I.D. o-ring is more suitable. I have yet to test this but am planning to. It should be noted that after cleaning the sealing surfaces, the magazine cap does not leak with the stock o-rings. Also because they are sealing surfaces and the tolerance are tight, extreme care must be taken no to scratch them!
Also, there have been some design changes compared to earlier versions people have reviewed around the internet. The Hammer roller mis-alignment issue that may bind the slide has been changed to an eccentric cam. My current copy has no issue with the slide binding. The lower mechanicals look to be decently machined but the slide guides they are housed in are not and are of a lower quality alloy.
All in all, it is a decent pistol for the price when on sale for $95; so much so I recommended it to a friend.
Stay safe and happy shooting!
by Gavin C. on 08/23/2017
"First off let me say this sidearm looks and feels awesome. I received this sidearm yesterday and have done a lot of shooting. The slide does tend to stick a little but it still shoots perfectly.
Pros:
Looks awesome
Feels awesome
It's accurate
Blowback
Low co2 usage
Cons:
It would only shoot about half a mag and then would stop. Found a fix tho.
Overall buy this gun. You shouldn't regret it.
Pros:
Looks awesome
Feels awesome
It's accurate
Blowback
Low co2 usage
Cons:
It would only shoot about half a mag and then would stop. Found a fix tho.
Overall buy this gun. You shouldn't regret it.