Prometheus 6.03 EG Tight Bore Inner Barrel for Airsoft AEG by Laylax (Model: G&G Special Edition / 120mm)
66 Customer Reviews
by Matt B. on 06/15/2019
"This barrel is amazing! It is the official Prometheus EG tightbore. (Not a knockoff). I currently have this barrel paired with a Pro Win hop up chamber, G&G green bucking, and R Hop patch by Elvish Tac. It is super accurate and provides amazing range with the combination I used. All of this I put into my Krytac MK2 SPR. My gun now shoots like a dream.
by Moon K. on 02/21/2019
"High quality and works as intended
by david m. on 12/20/2018
"Great barrel. Does what you would want it to do. I bought this barrel to make my VFC Avalon a CQB gun. I would say that it is a bit pricy for just an inner barrel. Should lower the price a bit, but it’s what you want from a barrel.
by Felipe E. on 09/05/2018
"Direct fit to my KWA RM4a1 ERG, it's a bit thicker but fit well in the outer barrel the hop up chamber had some trouble accepting it but with some lube and some finesse I got it to seat only the brass bushing at the end did not fit over the barrel so I left it out I will be sanding down the inside diameter a bit to fit the barrel later to re-install it. The grouping is where this barrel shines man-o-man it can put rounds, depending on the wind of course, on a 3x3 inch target easy at 40 yards especially after the flat hop mod I did with it, on full auto some of the rounds impact in the exact same spot. Great barrel highly recommend it and keep it clean.
by Ahmed N. on 09/01/2018
"Awesome Barrel. been running it in my ICS CXP APE and is honestly more reliable than the usual stock barrel. Great stuff
by Michal F. on 04/20/2018
"Well it's the best AEG barrel, pretty easy.
by Taylor J B. on 04/18/2018
"Great Barrel. As a machinist i must say this is a very nice bore and very nice finishes. Will buy again
by Cyrus M. on 12/11/2017
"This will fit exactly on a G&P MP5 . Awesome upgrade!
by Daniel P. on 11/23/2017
"This is a very high quality barrel. Paired mine up with a Matrix CNC hop up unit and the accuracy has improved a lot. Certainly worth the price! I will be buying this barrel again for future builds.
by Edney H. on 11/02/2017
"Very good inner barrel, increase the shot precision, even for a 9" AEG like the G&G CM 16 SRL, which fits perfectly.
Good choice for upgrade!
Good choice for upgrade!
by Luigi M. on 10/01/2017
"My bolt br47 hop up chamber is a little bit open after the change. But shoots straight, much better than the original 6.0 bolt barrel.
by Jon T. on 05/08/2017
"Relatively easy installation. Along with a new bucking made my Krytac shoot further and have tighter groupings.
by Jack M. on 03/02/2017
"As of right now, the current whether has been crazy and I've only tested this inner barrel a few times, but I've got a good sense on how it performs.
This inner barrel is precisely machined and is very good quality. I accidentally bent my stock Krytac barrel and wanted a replacement that would work with my mock suppressor I had bought with an inner barrel in it. I shot it with the mock suppressor and without it and I was very happy with my results. My stock barrel was getting groupings up to about a foot or a foot in a half stock at about 150 feet or so, which is decent. With this new barrel I am getting groupings 6 inches at 150 feet, which I thought was pretty great. The mock supressor helped a tiny bit when put on with this. This is on my MK2 SPR.
If you're in need of a replacement inner barrel and you want to keep your stock barrel length, this option is fantastic. Only wish they offered a pre rhopped option for this, so you could squeeze a few more feet out of the range.
This inner barrel is precisely machined and is very good quality. I accidentally bent my stock Krytac barrel and wanted a replacement that would work with my mock suppressor I had bought with an inner barrel in it. I shot it with the mock suppressor and without it and I was very happy with my results. My stock barrel was getting groupings up to about a foot or a foot in a half stock at about 150 feet or so, which is decent. With this new barrel I am getting groupings 6 inches at 150 feet, which I thought was pretty great. The mock supressor helped a tiny bit when put on with this. This is on my MK2 SPR.
If you're in need of a replacement inner barrel and you want to keep your stock barrel length, this option is fantastic. Only wish they offered a pre rhopped option for this, so you could squeeze a few more feet out of the range.
by fred b. on 01/30/2017
"major improvement over stock. the pdw is a great little gun for cqb. but it can be improved on. that's where this barrel comes in to play. bought 2 of these barrels. 1 for my sons pdw and one for mine. accuracy was increased dramatically and there was a small bump in fps. can shoot a dime size target 25 feet away. I saw 25 because that is avg feet at nearest cqb field. fps for my son's and mine pdw before avg 320/335 with .2's with new barrels 348/353. buying next a barrel for our spr's.
by Louis M. on 01/08/2016
"Running this through a VFC HK417 with a flat hop and m140. I'm hitting a torso sized target at 300ft 3/5 times. Absolutely recommend this to anyone trying to get the most out of their dmr. While the hop up is more important for long range shooting, a great barrel like this provides even more consistency to the system as a whole.