Cybergun / FN Herstal Licensed FN2000 Airsoft AEG Rifle (Package: Black / 350FPS)

"From an amateur tech perspective: This gun is through and through an AUG in an F2000 body (hop up looks to be a standard AUG hop up but not too sure and gearbox is basically an AUG gearbox not too sure about nozzle length). So if that appeals to you, double stage trigger and all this gun is for you. I would say the externals are solid and slightly less sturdy and nice feeling than the G&G but at half the cost can you really complain?

Took this gun out stock and it performed decently at Code Red. FPS is on the low side even with the allen key FPS adjustment screw in the back all the way turned in (350 FPS). Got inside the gearbox (remove two screws in the back a la the P90), fixed up compression, teflon taped the bucking and boom 400 FPS no problem. My only gripe is that a large gap at the top of the gearbox allowed a BB to somehow roll in the gearbox and jam my AR latch. My suggestion to anyone is to make sure there are no bbs in the body of your gun when you take out the mags.

Mag compatability ive only tested with high caps. My hexmags and my elite force 140s dont fit.

All in all a great beginner gun for CQB OOTB and a decent upgrade platform. Just hated how I was unlucky enough to get a BB in my gearbox :(

"Less Than Stellar.

I bought this Gun on an Impulse buy, and I was really excited to get it.
Upon Unboxing I was Thrilled, The gun was sleek, compact, and felt good in my hands!
I slapped that magazine in in the well and ejected it. Reloads felt great! the sight picture looked, OK.
The Charging handle serves no purpose other than to look cool, But it is very wobbly. I have a feeling it will break off without any trouble. It does lock back but any slight bump it will slam forward. e door where the Shells would eject on the real one is there and it opens and closes, but again, serves no purpose except to look cool.
The Hop up is accessible on this little door in the back and is very accessible and snaps shut. Vey nice.
Battery compartment takes some work to get to but not impossible.
The Takedown was very Easy.
So then I went to the Airsoft Bucket and started customizing it.
The Orange tip is glued in place and I can't tell if it has a retention screw. but it it just plastic anyway and my break off, but I have not done so yet to see if there is a Threaded Barrel underneath for a Tracer unit, Mock suppressor or an after market Flash hider.
Optic Rail is Large enough to attach a Variety of Scopes, Red dots and Magnifiers.
No Side rails for flashlights or lasers.
The forward assembly of the Gun looks like it slides off and to reveal an under rail but I was unsuccesssful in removing it. so there may not be any.
I tried a Verity of different Magazines and started running into trouble.
Drums do not fit, C type and Single drums too.
Obviously it takes full Stanag type mags, Mid, and High caps,. but certain brands did not work. Older Models like Dboys, CYMA, and KWA mags did fit. but my G&G Midcaps did Not fit.
Nor did my Vietnam Style short mags fit.
Any mag with a Pull tab seemed to get stuck too.
and My Magpul EPM1 mags got stuck, I mean really stuck, a 20 minute affair of taking the gun apart and forcing the mag out.

and then I tried firing it.
I could not get it to shoot full auto. semi auto only.
Both selections and still only semi auto.
For the Price I can't complain too much, and for an indoor Gun Semi auto is the only choice anyway.

Sling, works Ok, I used a P90 Sling wrap.

And Lastly, something I always forget to do... Testing the Gun in your hand in Full kit.
It fought with my Plate carrier and got in the way of some stuff.
and the Problem wit almost all bullpup airsoft guns, My full facemask gets in the way of aiming down the sights the smaller masks, not so much, but it is still cumbersome.

"Middle ground for a reason. I began to question it's quality right of the box. The charging handle felt flimsy in the first place, so I was gentle with it. Yesterday, two pieces of plastic broke off, yet it wasn't important. I wasn't too worried with it. But today, I pulled it back and it seemed to get stuck. Yesterday it was sticking also. I let it go forward and it broke right off. Words can't explain my disappointment for Cybergun as a whole. Sure, this is only $150, but I expect the charging handle to work and be solid.

"The gun looks cooler than it really is. It's heavy and awkward to operate, the magazine well is oddly shaped and does not fit other m4 style mags as advertised. The rate of fire is insane, but when the magazine misfires and doesn't feed smoothly it's all for nothing. Also the charging handle on mine is all wobbly and loose like it could just fall off and I kinda hope it does because it's big and bulky and just gets it the way. Maybe I just got a bad gun or maybe it's really just not a good gun, but I was kinda disappointed with it overall and will probably sell it soon here