MAG 100 Round Mid-cap Magazine For AK Series Airsoft AEG (Color: Imitation Bakelite / 5.45 Style / One Magazine)

"After a bit of work these mags fit very well, without any feeding problems. Seems very solid, doesn't twist like some of the cheaper mags do. That said, they are very ugly.

Minus one star for having to cut away the excess plastic to get it to fit my AK-74u.

"Magazine WORKS perfectly fine. I got two, for a primary and secondary mag. My Hi-Cap is a tertiary mag. But the mag itself is made like trash. The color has the weirdest tint of brown, it's kind of nasty. As well, I didn't have a file, like the other guy did, so I had to carve on the tab and all that extra useless plastic around it with a knife to get it to fit right in my ECHO 1 AK-74. So the tab and the general color of the mag looks NASTY! But.... It works! And that's what really counts, I think.

"This mag needs some modification to work with the newer CYMA AKs
i had to file down the tab on the back for it to lock into place, and i had to put tape around the top because, while firing it would slide out of place by like 1mm because of the vibrations and stop firing but, with the tape on it stays in place, but i still push it in a little more every now and then just to be sure

"Very mediocre mags. First of all they feel like cheap dollar store plastic. Second the base plate slides off with little to no effort. And finally they do not hold 100 rds. I manually counted each bb from each Mag and each holds anywhere from 60-80. These mags "work" in a pinch but do not rely on these. Final note, any sudden shock like a bb hit or drop dumps the magazine.

"they fit and feed but the spring tension is a bit too high, doesnt feel like it actually holds 100 rds and has broken like 5 speedloaders

"Although I like these magazines you can see the inner mold lines on the sides of the magazine almost like the magazine was see-through and somebody painted it unfortunately I can't post a photo.
They look more black than plum.
And the base plates just fall off there's nothing holding them no detent nothing..
I still can't get over being able to see the inner mold lines on the side of the magazine in fact the more I look at it I can see the U wear the spring coils.

"I ordered these and received them today, I shot each mag fully loaded, so around 500 bbs, I didnt need to lube them, they fit nice and tight into a dboys aks74u. They are type of plastic and they do scratch easy /:
but one thing I am not happy with they dont fit 100 bbs...more like 80-90

pros

cheap
feed nice
no need to break them in
no winding

cons

scratch easy
dont hold 100 rounds
low capacity mid cap

"I preordered these but i would say they are more black than plum..
Worse the base plate just falls off, there is nothing holding them on, some superglue will fix it.
Worse than that stuff... you can see the mold lines from inside the mag, you can see the U where the spring is and the walls that support that mag make these lines show through the mag... looks cheep

"Being used in a dBoys RK-01 (AK74u) with a SMP. Oiled, loaded and unloaded prior to use.

The good:
Mags have a good feel to them... good plastic.
Fed well on auto.
All but last 2-3 bb's fed.

The bad:
Had to put tape at top to keep them from wiggling in mag well. (probably not a bad, should expect this with any mag.)
Two of the five failed horribly half way through day. The other three show signs of same failure.

The two stars are for the look and feel. Won't buy these for my AK applications again.

"Bought several of these and gave them a try. The outer construction is good, and the capacity is about right (mine were taking about 90). However that's the only thing they have going for them.

The floor plates of the mags are terribly loose and fell off easily. The slightest bump causes rounds to fly out when they are not in the gun. The fitment in both Cyma and E&L AK's leave something to be desired (tried them in 5 guns total). They wobble both back and forth and left to right when in both types of guns. They also do not lock in reliably into either of the mentioned gun types and cause irregular feeding, even in semi-automatic. Finally, the dimensions of the mag are wrong, as they are shorter than the standard length of an AK-74 magazine (albeit this is a minor gripe that may not matter to every user).

Maybe these will work for you, but in my case, they did not.