MAG 130rd Midcap Magazine for M4 / M16 Series Airsoft AEG Rifles (Color: OD Green / One)

"These are awesome midcap mags for the price. I bought this box of 8 because I wanted to make sure I had enough to reload easily and even though I can only carry 3 with me per game, (one in my ICS M4 and 2 in my mag pouch) I wanted to have extras in case one broke or I lost one, which I knew would happen. Sure enough, I only have 3 left. I have a love/hate relationship with the light, cheap plastic they are made of. On one hand, they weigh much less, so when I have to do a fast reload and don't have time to put my empty in a pouch and have to let it fall to the ground, it's less likely to fall hard and break. At the same time, they lack the solid, metal, realistic feel of metal mags. These feed great and you get a lot for the price.

"These mags are the best you can get for the price. Very durable, and feed flawlessly into my ICS m16a3. I lost one out on my local field for a month and found it last time we went out, even after being left outside for that long, and it was fully loaded. I put it in my gun and it still fed perfectly and I have been using it since then. If you are looking for great performance, durability, and price, these are the mags for you.

"Dust, mud, drops onto rock and concrete, it doesnt matter, these mags can take it all. Fit well into any KWA and feed perfectly even with lipos. Love'em! 5/5

"This are a very nice midcaps
it works fine on DBOYS M4 RIS, wobble a little bit

PROS:
-Cheap
-Works fine on DBOYS
-Very nice quality plastic made

PROS:
-Are GRAY not Black and didn't come with the MAG label

"Great Midcaps. I've previously bought the Beta Project Pmags and all they did was look cool. They jam all the time, so I decided to get one of these. They feed flawlessly! The first mag I sprayed with silicone oil and bbs. Even when I overload it, it does not jam and luckily if it does jam you can stick a screwdriver in the cap and take it off to reach the spring, spring guide, and follower; this is a much better design than the cap on the pmags where you need a pointy knife to pry the cap off. Also the spring tension is very strong. I'm sure they can feed an AEG that shoots 40 rps. Another thing I like about it is the follower's design. There's no room for wiggle unlike the beta project mid caps so they will never jam up on you.

Get them! They feed well, the design is good, and they are very lightweight.

"Pros:
- Solid construction
- Light weight
- Feeds well and good internal spring

Cons:
- Fairly loose in many mag wells, nothing a quick tape up can't fix.
- plastic scratches up easily.

"Beautiful and cheap, they're so simple that they work with everything. I have not found a single gun that these don't work in, some wobble more than others though. Springs are strong and they las a long time. I have dropped these on concrete on the fly and they will not break.

"These feed great! 5000 rounds and no jams or misfeeds. no joke. And i have 6 and they all feed in my KWA. Also they feed up to 25 rps an higher so the spring is stiff. Lube them and load and unload and your good to go! Great mags and cheap to.

"I run 5 of these midcaps with MagPuls in my G&G Combat Machine pushing 40 rps and I have had no failures in a year. They feed flawlessly and despite the plastic construction they are very durable. I have put these through everything from water to mud to sand and they hold up fine.

Pros:
Cheap
Fit in a KWA mag well
Feed flawlessly
Hold a decent amount of ammo
light

Cons:
Everyone wants to borrow my mags...
They are thin enough to fit in KWA's so if you use magpuls like me they can come off if you pull the mag out of your vest to fast
Wobble like crazy in a G&G nylon body but no feeding issues

I probably will not buy another kind of midcap again. These mags are everything you could ask for in a midcap.

"Outstanding for about 2 seasons of airsoft. After that you'll need to replace them. Depending on how often you play of course. I play about 2-3 times a month for 5 hours of gaming to give you an idea of how long they have lasted. I orded this 8 pack and 3 are completely dead, the other 5 are nearly worn out. Very durable plastic except for the port that the spring is attached to. That will break first once you've opened them and cleaned them a number of times. Overall very decent mags.

"theys are awsome i just got them i did not have to brake them in i love mid/low cap mags and really cheap prices +you are getting 8 there awsome

"Bought two of these and let me tell you... solid fit into my D-boys m4 s-system. took a couple loads and unloads to break in the springs, but after you get all 130 rnds in, they rock. No mis- feeds at all (except for last 3 bb's due to gravity lolz) Ordering another 3 so i don't have to use hi-caps no more and here those bb's jumping around in the mag. they may feel like cheap plastic at first, but don't let it underestimate you. These mags are as good if not better than the $20-$30 metal counter parts. Because they fit so well, mine fall out like metal mags, and lighter weight means less weight overall when moving around, which is always a plus =D

KiwiAssassin

"Does it's job so cannot complain. Haven't had any problems at all with this. Very solid build and because its mid cap it doesn't sound like a maraca which is great. I bought this for a Classic Army M15A4 and it fits good. However its more tan than dark earth.

"These are awesome. My teammate runs about ten of these, total, and they feed flawlessy. His dad uses these, and with a few highcaps. Break 'em in and they kick butt. If you want mid-caps, get these and don't even consider the other mags. But that's only if you want mids...

PS Gus G.
1. that info doesnt help.
2. take it to the forums. I get responses to those kind of questions in about an hour.

PPS Travis B.
1. read Nicholas M's review. Does that help?
2. FORUM. but since you didn't read nicks, you probably won't read my PS to Gus... it takes an hour.




These mags are awesome, I wouldn't feel comfortable with anything else. It's like wearing someone else's undies...
Anyways, they are my personal favorite, they run great in a custom G36 (with an M4 magwell), and i LOVE taping these together for dual mags... The plastic in these mags agrees with my camo tape very well..
Hope I helped.

"I bought these Magazines for my JG M4 AEG. I've had zero problems so far....


PRO(S):
Lightweight
Affordable
High capacity
easy to replace if lost or broken.

Cons(S):
Plastic looks more like a toy than an airsoft mag
Feeding*


Overall,this mag deserves 5 stars.

*The last 4 BB's do not feed into the gun unless you turn the gun upside down. This is a problem with ALL midcaps,Not just this one.