(626) 286-0360
Airsoft
Fishing
Air Gun
Element QD Barrel Extension with Masada Type Steel Flash Hider (Color: Tan - Long / 14mm Positive)
49 Customer Reviews
by Joshua K. on 05/22/2013
"It was not what i expected...I wanted a longer silencer for my gun but when this arrived I was completely wrong when thinking longer is better...baha this thing rocks! its shorter but no big the flash hider screws onto your gun and is set in place and the silencer is separate to screw onto the flash hider so you can use and remove the silence at will. Tons of fun and effective. The flash hider also has stubs on the front so you can barrel thump somebody and do some damage!...not really, but you could.
--------------
Pros
--------
Full Metal
heavy
NOT ORANGE
flash hider replaces old
silencer can be used over new flash hider included
--------
Cons
-------
None!
--------------
Pros
--------
Full Metal
heavy
NOT ORANGE
flash hider replaces old
silencer can be used over new flash hider included
--------
Cons
-------
None!
by T.S W. on 05/06/2013
"This thing is awesome! I love it, especially since i play night games mostly and the orange tip would always give away my positon. Its made to last, out of full steel, both the new tip and the actually mock suppressor. Its about 4" so it doesn't weight down your gun at all.
Pros
looks great
replaces plastic orange tip (con for some)
removable suppressor and you still have the steel tip
heavy duty metal construction
Cons
none so far
Pros
looks great
replaces plastic orange tip (con for some)
removable suppressor and you still have the steel tip
heavy duty metal construction
Cons
none so far
by Andrew N. on 11/17/2011
"For $45, you cannot beat it. Most places I looked at sells this kit for over $80! But then again I personally know a few resellers that buys everything from Evike. Easy to use and my favorite part is the steel sound it makes when you install this.
Conclusion: Looks awesome on my scar! The flashhider on this kit alone in my opinion is worth the $45 since it looks so much nicer than the plastic one that came with my gun!
The ability to quickly screw on the suppressor when needed is a plus. (I hate unscrewing the flashhider).
I am trying to see if I can fit a tracer unit in this suppressor, stay tuned for my future reviews.
Conclusion: Looks awesome on my scar! The flashhider on this kit alone in my opinion is worth the $45 since it looks so much nicer than the plastic one that came with my gun!
The ability to quickly screw on the suppressor when needed is a plus. (I hate unscrewing the flashhider).
I am trying to see if I can fit a tracer unit in this suppressor, stay tuned for my future reviews.
by jonathan p. on 03/25/2011
"love it!
the flash hider gives the gun a nice metallic ping w/o the suppressor attached.
the suppressor is also very nice! it comes apart and is filled with foam rings and may not really quiet the gun but it does give it a different tone.
I've paid more for less so I have to say it's worth every penny for your WE Tech gbb SCAR.
the flash hider gives the gun a nice metallic ping w/o the suppressor attached.
the suppressor is also very nice! it comes apart and is filled with foam rings and may not really quiet the gun but it does give it a different tone.
I've paid more for less so I have to say it's worth every penny for your WE Tech gbb SCAR.
by Rick S. on 03/20/2010
"Nice product, decent price, looks nice. I like the fact that I can easily remove the silencer.
by Josh K. on 03/07/2010
"This thing is very well made. I put it on my G&P M4 Alpha and it really adds to the overall look of that rifle. Mock Silencer is perfect size and works very will with BB's ROF and line. Foam inside holds well. But my favorite feature of this set, is how easy the silencer attaches to the always attaches flash hider. You just attach it and twist 1-2 times and click - locked in. Very well made and durable. Great piece of gear.
by Lino P. on 05/06/2018
"Pretty good quality for the price. There is no "lock" onto the flash hider, just a small retaining spring that does give a subtle "click" as you do the final rotation. It should be noted that AAC 51t products WILL fit on this flash hider and lock/function.
by David A. on 04/14/2014
"This product could be better; the look, feel and weight are perfect, but I believe my suppressor unit does not fit the hider as snug as it could, this could be fixed with the proper-size rubber o-ring but as it stands, when crewed on, my suppressor actually blocks some of my shots because it sits off-kilter at a canted angle.
The hider itself does have a very aggressive look, but mine came with a lot of patina over what looked like an old finish; I don't recommend painting it flat black unless you're planning to have it anodized so that the paint doesn't fleck off as easily upon impact.
This suppressor combo gets 4/5 due to the fact the suppressor sits canted; the hider is heavy and robust, but its finish is a little lacking, which is purely a cosmetic discrepancy whereas the suppressor is a genuine function issue. Perhaps mine was just the bad one out of many good ones, but at this point it's just eye-candy for me.
The hider itself does have a very aggressive look, but mine came with a lot of patina over what looked like an old finish; I don't recommend painting it flat black unless you're planning to have it anodized so that the paint doesn't fleck off as easily upon impact.
This suppressor combo gets 4/5 due to the fact the suppressor sits canted; the hider is heavy and robust, but its finish is a little lacking, which is purely a cosmetic discrepancy whereas the suppressor is a genuine function issue. Perhaps mine was just the bad one out of many good ones, but at this point it's just eye-candy for me.
by David A. on 04/14/2014
"This product could be better; the look, feel and weight are perfect, but I believe my suppressor unit does not fit the hider as snug as it could, this could be fixed with the proper-size rubber o-ring but as it stands, when crewed on, my suppressor actually blocks some of my shots because it sits off-kilter at a canted angle.
The hider itself does have a very aggressive look, but mine came with a lot of patina over what looked like an old finish; I don't recommend painting it flat black unless you're planning to have it anodized so that the paint doesn't fleck off as easily upon impact.
This suppressor combo gets 4/5 due to the fact the suppressor sits canted; the hider is heavy and robust, but its finish is a little lacking, which is purely a cosmetic discrepancy whereas the suppressor is a genuine function issue. Perhaps mine was just the bad one out of many good ones, but at this point it's just eye-candy for me.
The hider itself does have a very aggressive look, but mine came with a lot of patina over what looked like an old finish; I don't recommend painting it flat black unless you're planning to have it anodized so that the paint doesn't fleck off as easily upon impact.
This suppressor combo gets 4/5 due to the fact the suppressor sits canted; the hider is heavy and robust, but its finish is a little lacking, which is purely a cosmetic discrepancy whereas the suppressor is a genuine function issue. Perhaps mine was just the bad one out of many good ones, but at this point it's just eye-candy for me.
by Tomas P. on 04/14/2014
"This is a good looking flash hider with mock silencer included. Easy to take it on or off.
The only problem with it is that it does not screw on tight enough and can become loose and even loose enough to mess up the bbs if your inner barrel is not long enough. I actually smashed some bbs inside of it once. You could glue it but then it makes the standard flash hider useless.
PROS:
- Looks Good
- Easy to put on and take off
CONS:
- Becomes loose too easily
- bbs can jam/ break apart inside of it
Final Thoughts: You might think about getting the stubby version of this. There will be less chance of obstructing the bbs.
Final Rating: 7/10
The only problem with it is that it does not screw on tight enough and can become loose and even loose enough to mess up the bbs if your inner barrel is not long enough. I actually smashed some bbs inside of it once. You could glue it but then it makes the standard flash hider useless.
PROS:
- Looks Good
- Easy to put on and take off
CONS:
- Becomes loose too easily
- bbs can jam/ break apart inside of it
Final Thoughts: You might think about getting the stubby version of this. There will be less chance of obstructing the bbs.
Final Rating: 7/10
by Tomas P. on 04/14/2014
"This is a good looking flash hider with mock silencer included. Easy to take it on or off.
The only problem with it is that it does not screw on tight enough and can become loose and even loose enough to mess up the bbs if your inner barrel is not long enough. I actually smashed some bbs inside of it once. You could glue it but then it makes the standard flash hider useless.
PROS:
- Looks Good
- Easy to put on and take off
CONS:
- Becomes loose too easily
- bbs can jam/ break apart inside of it
Final Thoughts: You might think about getting the stubby version of this. There will be less chance of obstructing the bbs.
Final Rating: 7/10
The only problem with it is that it does not screw on tight enough and can become loose and even loose enough to mess up the bbs if your inner barrel is not long enough. I actually smashed some bbs inside of it once. You could glue it but then it makes the standard flash hider useless.
PROS:
- Looks Good
- Easy to put on and take off
CONS:
- Becomes loose too easily
- bbs can jam/ break apart inside of it
Final Thoughts: You might think about getting the stubby version of this. There will be less chance of obstructing the bbs.
Final Rating: 7/10
by Tomas P. on 04/14/2014
"This is a good looking flash hider with mock silencer included. Easy to take it on or off.
The only problem with it is that it does not screw on tight enough and can become loose and even loose enough to mess up the bbs if your inner barrel is not long enough. I actually smashed some bbs inside of it once. You could glue it but then it makes the standard flash hider useless.
PROS:
- Looks Good
- Easy to put on and take off
CONS:
- Becomes loose too easily
- bbs can jam/ break apart inside of it
Final Thoughts: You might think about getting the stubby version of this. There will be less chance of obstructing the bbs.
Final Rating: 7/10
The only problem with it is that it does not screw on tight enough and can become loose and even loose enough to mess up the bbs if your inner barrel is not long enough. I actually smashed some bbs inside of it once. You could glue it but then it makes the standard flash hider useless.
PROS:
- Looks Good
- Easy to put on and take off
CONS:
- Becomes loose too easily
- bbs can jam/ break apart inside of it
Final Thoughts: You might think about getting the stubby version of this. There will be less chance of obstructing the bbs.
Final Rating: 7/10
by Steve G. on 05/26/2013
"PROS:
1. Solid construction
2. Looks great
3. Quite Heavy (2.8oz) Flashhider + (4.4oz) 4.5" Mock Silencer = 6.9oz overall (Weighed with postal scale)
4. Price
CONS:
1. Inner threads of mock silencer aren't the greatest, but with a lot of Matrix brand, their threads are a bit loose, but nothing a bit of LocTite cannot fix.
OVERALL Conclusion:
It is a great value for $30! You get a SCAR Style flash hider which is $15 on its own and you get a compact QD Mock Suppressor. Only slight down side is the inner mock suppressor threads.
1. Solid construction
2. Looks great
3. Quite Heavy (2.8oz) Flashhider + (4.4oz) 4.5" Mock Silencer = 6.9oz overall (Weighed with postal scale)
4. Price
CONS:
1. Inner threads of mock silencer aren't the greatest, but with a lot of Matrix brand, their threads are a bit loose, but nothing a bit of LocTite cannot fix.
OVERALL Conclusion:
It is a great value for $30! You get a SCAR Style flash hider which is $15 on its own and you get a compact QD Mock Suppressor. Only slight down side is the inner mock suppressor threads.
by Mr. A. on 01/11/2013
"really great product. it adds the finishing touch and gets rid of the ugly orange type on the front of the gun.
pros:
looks nice
2 in 1
adds length for longer inner barrel
easy to remove/re-attach silencer for whatever look you want
secure
cons:
REALLY heavy. feels like full steel lol
silencer screws on top of the flash hider so its not two entirely seperate things.
great product. would definitely recommend if you don't mind the extra weight on the front of the gun. i got it for $16 when it was on sale and it's worth every penny.
pros:
looks nice
2 in 1
adds length for longer inner barrel
easy to remove/re-attach silencer for whatever look you want
secure
cons:
REALLY heavy. feels like full steel lol
silencer screws on top of the flash hider so its not two entirely seperate things.
great product. would definitely recommend if you don't mind the extra weight on the front of the gun. i got it for $16 when it was on sale and it's worth every penny.
by Tomas P. on 12/10/2012
"This is a good looking flash hider with mock silencer included. Easy to take it on or off.
The only problem with it is that it does not screw on tight enough and can become loose and even loose enough to mess up the bbs if your inner barrel is not long enough. I actually smashed some bbs inside of it once. You could glue it but then it makes the standard flash hider useless.
PROS:
- Looks Good
- Easy to put on and take off
CONS:
- Becomes loose too easily
- bbs can jam/ break apart inside of it
Final Thoughts: You might think about getting the stubby version of this. There will be less chance of obstructing the bbs.
Final Rating: 7/10
The only problem with it is that it does not screw on tight enough and can become loose and even loose enough to mess up the bbs if your inner barrel is not long enough. I actually smashed some bbs inside of it once. You could glue it but then it makes the standard flash hider useless.
PROS:
- Looks Good
- Easy to put on and take off
CONS:
- Becomes loose too easily
- bbs can jam/ break apart inside of it
Final Thoughts: You might think about getting the stubby version of this. There will be less chance of obstructing the bbs.
Final Rating: 7/10