Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Free Shipping for Orders over $149. EPIC DEALS released daily!

Matrix 6.03mm Precision Steel Sniper Tight Bore Inner Barrel for Airsoft AEG (Length: 110mm)

55 Customer Reviews

by Piotr S. on 02/12/2011
"this thing is nice and long........................................................-
...............................
brought this for my dmr conversion which i had to add a 9.5 inch suppressor on it to fit it
make sure you use full cylinder so that there will be enough pressure for the bb to fly out

5/5

ps: get a measuring tape in meters before buying
by Michael W. on 12/16/2010
"Great barrel! perfect for sniping, i put it in my m16 and without hop up it goes an easy 90 feet (390fps). im looking forward to getting more upgrades to allow my barrel to reach its full potential on the feild
by Michael W. on 11/23/2010
"pros:
accurate
long range
i shot it in bad winds and had no drop but very little windage
relatively cheap for how much it improves your gun

cons:
can be confusing to install

NOTE- wen u first install it, your bbs might not be accurate at first, this happened to me and i started to get mad. i kept shooting and it gradualy got better and better and by the time i was done with 1 mag the barrel was "broken in".

i recomend it (for DMR's or snipers)
by James Y. on 10/22/2010
"Installed this and about $400 worth of other crap on my UTG L96 turning it into a 550 fps, accurate to 300ft sniping machine.

Pros:
Durable, Well made
Easy installation
Increase to fps (530 before, 550 after)
Increase to accuracy at range (Can touch people 300ft away reliably, with other upgrades)

Cons:
This barrel is massive so make sure you have a barrel extension for this thing. (Con on my end)

Also make sure you're at least 6ft tall to put this in a L96 because when I slung my rifle the barrel touched my boots.

5/5
by James Y. on 10/22/2010
"Pros:
Helps eliminate random flyers.
Super durable and well made.
Easy to install.
Does increase fps by about 15 or 20.
Does increase accuracy at range.

Cons:
Can sometimes be a tight fit for your hop up.

5/5
by Magoo B. on 09/29/2010
"Would this fit a G&G Limited Edition Blowback "Fighting Kitty" Combat Machine with a 110mm gemtech silencer/ outer barrel
by Craig F. on 09/21/2010
"This is a great product. The first time I played with it, all the guys kept asking me whether or not I had gotten a new gun. They couldn't believe me when I told them that all I did was replace my standard inner barrel with the Matrix 363mm tightbore. This barrel is worth every cent of the cost!
by ian g. on 08/31/2010
"This barrel is for the MP5K/MOD5K series
._. ._. ._. ._. ._. ._. ._. ._. ._. ._. ._. ._. ._.
by Willi R. on 01/05/2010
"I actually own this thing!
Great barrel! I put it on my tricked out SRC m4 and works great. Very durable and heavy. It even has the dimensions engraved into the barrel "363X6.03" I think this is a nice touch and shows the quality. For the price you can't beat it and it's probable the most durable barrel on the market. P.S Don't post unless you own this thing. If you have questions go to the forum. Just assume if the length is right then this thing will work for you.
by David N. on 12/16/2009
"I got the Matrix steel barrel installed in my JG M4
FPS raised from 370~380 to 390~405 FPS. Now it'll shoot through the bottom of a can.
The gun is much more accurate now. Grouping was reduced by about 2 inches approximately 30 feet away. My AEG now have a grouping of about 1 inch with 0.28g Matrix bb shooting 390~403 FPS / 30 feet
I recommend this barrel to anyone looking for a tight bore barrel.
by jason c. on 09/29/2009
"Wow just wow... this barrel is AmAzing! Full review:
!!! Go to youtube and find JCNWproductionz. as of 9-30-09 about 6pm eastern time a video review will be available of this barrel. the thing freaking shreds!

Pros:
Steel
Extremely Accurate
Extremely durable
Increased my Jg m4 cqb fps about 15fps.
EASILY HITTS A MAN TARGET AT 150FT! CONSISTENTLY PEOPLE!!!
30$ cheaper then the "high brand" promotheus barrel

Cons:
unless you throw your gun of a cliff and destroy your barrel...
there is no cons ^^
by jordan W. on 09/25/2009
"OMG!!

This barrel is awesome! I installed it on my jg aug (with silencer) and it was unbelievable. the guns accuracy was always pretty decent but now it's incredible. (i also added a metal hop up) after sighting in my scope i put a dot on a paper about 75ft away. I emptied a 170rd clip on full auto and punched a clean hole through the box about 3" wide. of the 170rds less then 10 were outside the 4" diameter and all of them were within about an 8" diameter. needless to say i was impressed. i have not had a chance to test it at greater distance yet put i will post when i get a chance.
6 out of 5 stars
by David k. on 09/25/2009
"Excuse me webmaster, would this work for a p90 aeg? Just curious write back if you can.

Webmaster: P90 barrel length will be 247mm.
by Raymond Y. on 09/18/2009
"Test conducted with: G&G AK
Range: 60 feet
Grouping (Diameter): Stock (8~10 inches) / Matrix Barrel (4~6 inches)
BB: Matrix 0.25g
FPS: 360 FPS Stock / After - 385 FPS

Test conducted with: Echo1 AK
Range: 60 feet
Grouping (Diameter): Stock (12~15 inches) / Matrix Barrel (4~6 inches)
BB: Matrix 0.25g
FPS: 390 FPS Stock / After - 415 FPS

Conclusion: Great Barrels and much stronger in construction than any other barrels I have used.
by Matt J. on 09/04/2009
"Best AEG barrel I have used. (Well, there is Prometheus that is identical to this one, but 3 times the price.)

Pro:
Packaging is hard tube.
Straight
Durable
Just like the Prometheus barrel I had, can't tell difference.

Con:
Makes you realize that you shouldn't have spent $50 more on a Prometheus....