Evike.com G&P Rapid Fire II Airsoft AEG Rifle w/ QD Barrel Extension and i5 Gearbox (Package: Designed for Fully Auto Only / Black / G&P)

"Out if the box this shoots about 355-370fps with .20g bb's, with .23g it shoots 348-355 fps, with .25 it shoots 330-345fps.

"Out if the box this shoots about 355-370fps with .20g bb's, with .23g it shoots 348-355 fps, with .25 it shoots 330-345fps.

"Finally got a Chance to test the Gun. Build quality is more than I Expected, thing's Solid! Orange tips were obnoxious to Remove, it comes with an Orange tip on Both gun and Suppressor, But it Comes with the replacement Black Metal Flash hider and Black Suppressor Cap. Mag fits snug as well Expected it to be lose but it wasn't. Once the Suppressor is attached it is also completely Solid, Pretty cool how it works, Definitely adds FPS and Accuracy like the video Shows but I Haven't had a Chance to take it to Get Chrono'd, Once the 7.4 G&P lipo is connected the lowest setting allowable on the Stock is 3, But it's a Stubby Stock so it's most Comfortable all the way out to 5 for Shouldering. Comes with Extra Mini Deans connectors which I will most likely Use because the one the Gun and Battery came with do not Connect all the way, there's an 1/8th inch Gap...I Have nothing Bad to say about the Gun, It's more accurate than I thought it would be and I'm Guessing it's Shooting around 20 RPS...Definitely worth the Buy especially for CQB

"This gun does not disappoint. Sturdy yet compact feel, with power thrown in the mix. I also have a G&P Daniel Defense Mk12 that I use the same battery and mags for. This is convenient.

Pros:
Sturdy
Perfect size for CQB
Loud due to mock suppressor
Stubby stock
Flip up sights

Cons:
Stock does not set into shortest position due to battery (7.4V buffer tube)
Mag is just a tad wobbly...evike sells some tape that'll work

"Haven't been able to shoot it yet but this thing is awesome so far. It looks shorter than the picture. Best way to reference this is that the rail system is about the size of a Magpul AFG 1. Mine came with a giant blazing orange amplifier that was difficult to remove. But once I did and added the included G&P Amplifier, It looks awesome. One thing to note is this will not fit crane stock batteries so you'll have to do the 7.4 lipo. Also the Buffer tube is mil spec so it will only fit Mil speck stocks. Luckily I had one from my G&P WOC and it just looks awesome. I really like the flip up sights it comes with but I have to go with the MBUS sights.

Pros:
G&P Build quality,
Comes with amplifier
Not a standard M4
Milspec buffer tube
Large/Normal Deans
Good feeling wires that won't poop out.
QD sling point.
Lipo ready

Cons:
Mag is a little wobbly
Milspec buffer tube
Isn't in your hands right now!!!!

"Really like the gun so far, need to get the battery (G&P 7.4 lipo that fits in buffer tube)-hope it has a high rate of fire, but can be expected from the lipo- externals-love them so much, best externals I have ever owned- planning on getting a holo to go on the top rail- internals seem to be good can't wait to bring it to black ops airsoft-or BOA)Zion IL

One thing, the orange tip was brutal to take off, fare warning, the pin was the hardest thing to get out, the threads are a little scratched up, but it still except threads cleanly, and the orange tip is huge, too.

"M4s get a lot of hate now from people saying they're too much of the same, but you'll blow those people away with the look of this gun.

While being a good gun internally, the externals are the nicest I've ever seen. I love how they are more box-ish than curved. The rail is awesome and unique (it is a replica of the Geiselle rail). The price that it's at right now ($300) is an excellent price. I did buy this gun from a company overseas before evike received a shipment of these. I would have saved quite a bit of money if I was able to buy it from here. I love the ball ball texture on the stock, pistol grip and mag.

I have already turned mine into a high speed AEG and am waiting for my battery now. The externals will always stay the same (except for the stock because I have to buy a battery that is literally a brick).

This gun comes with MINI DEANS so I advise getting a MOSFET that has deans on it.

OVERALL:

Pros:
-unique look
-great stock gun
-ball ball texture
-good quality G&P midcap included
-cool trades and words on it
-great looking flash hider
-extremely comfortable and ergonomic rail, pistol grip and stock
-great looking iron sights
-accurate
-can't stop looking at it because it is so beautiful

Con (only 1!)
-mini deans connectors

With 10 pros and 1 con, this is an excellent gun! Definitely would recommend.

"I Recently bought this gun and I am not at all disappointed. It has a full metal build (obviously excluding the stock, and motor grip,) it has an extremely high rate of fire, it runs well with my lipo (11.1v,) and the internals are great.

Pros:
High fire rate
Sturdy construction
"Lipo ready"
Includes a noveske
Battlefield receiver
Great internals

Cons:
Lost a coil on my old motor had to buy a new one pretty sure that was my fault though.

I would highly recommend this to anyone interested in seriously playing airsoft.

"Fantastic gun! High quality all the way around as expected with g&p. The mur upper is beautiful and says G&P weapon system instead of vltor trademark as stated in ad, no problem. Only con to the deal is that the lower was the generic G&P instead of the LMT trademark "special edition" body as advertised and sales rep. Checked and said all current stock was this way. So overall a fantastic specimen but not truly what it is represented to be, should include disclaimer regarding standard lower receiver!

"Great gun overall
Pros ----
High rate of fire
heavy( can be a con)
Sturdy build quality
functioning charging handle ( for hop up)
included flash suppressor is badass!

Cons----
dust cover doesnt close
Stock doesnt fit batteries
flash hider has a pin so its hard to get the giant orange one off

The attachments im running are a stubby vertical grip, Bravo red dot, rail covers, and Evike G2 flashlight
I hope to add a magpul moe pistol grip because i dont really like the one it comes with

"Great gun mine came today i love the upper reciver the v2 gearbox is very upgradeable. The externals over all are amazing.
Pros
solid
cool stock
short (can be a con for outdoor players)
comes with a noveske
high fire rate
lipo ready

Cons
none it is a great gun

The parts i got were a 363mm mad bull 6.03 tight bore barrel and a cqb master mock supressora tan peq box and a tan m3 light. It is a great gun with enough rail space for anything you need to put on it it also has multipul QD sling mount points and a mount which are useful for me because i use my pistol often it is good to know i haave a reliable system for my rifle. Thanks for reading!!

"This is a great low-mid end M4 AEG.

The gearbox is built with a high speed motor allowing for a high rate of fire with a 11.1v Lipo.
I run this with .25g which fires at 340fps / 380fps respectively with or without the inner barrel extension suppressor.

The fore grip that comes with the AEG is pretty wobbly and is held in place by friction springs.

The butt stock is very short, I had a hard time placing a stick type Lipo into it so I replaced it with a bigger CQB stock.
I also recommend using a MOSFET to regulate the high speed motor and slow down the destruction of your internals.

The mid cap magazine that came with the AEG has worked flawlessly for me as well.

However with sustained use and after 3 mil-sim games, the AEG had lost a couple piston teeth, causing it to lose fps, stop feeding, and fail completely. Replacing this piston fixed the issue but isn't such a simple task. For beginner, I do not recommend to take this apart and fix it.

"Just got the gun in, overall it's very sturdy, and it shoots real nice. But mine didn't include an instruction manual or tools, which isn't a big deal, usually with higher priced guns they don't include those type of things. But I've been to 3 hardware stores and I'm not able to find a screwdriver or alan wrench small enough for the screws in the orange tip, so I can't remove it. Which makes the suppressor useless since I can't even get the tip off of it to put it on.

If anyone knows what I'm doing wrong please let me know!

"Great gun. I've used it in several games and never had a single issue. The only complaint I have has to do with the suppressor. It does increase the FPS by a substantial amount but greatly reduces accuracy at ranges more than 75ish feet.

Over all definitely worth the money and can hold it's own against many of the higher quality VFC or Krytac AEGs on the field.

"Start with the gun is pretty awesome Very solid at first . Would be great for CQB but it shoots to hot for my local field. Krono's near 380 ish without the mock suppressor. It looks great with the suppressor but does not work well I did not notice any increase in fps with the suppressor. It worked great for 3 months thank you but soon after that the Select plate broke. This is an awesome gun but I would not count on the mock suppressor .