Matrix Hardshell Adjustable Holster for 1911 Series Airsoft Pistols (Type: Flat Dark Earth / Paddle Attachment)
38 Customer Reviews
by Evan B. on 05/17/2017
"The holster works good but the plastic is a little bit low quality
by Keith P. on 02/13/2017
"Great holster, securely holds my Elite Force 1911.
The only drawback is the molle adapter doesn't work too well. The bottom tabs lock into place but the upper ones slip out of the webbing way too easily. If they were a half inch longer I think they'd hold better.
The only drawback is the molle adapter doesn't work too well. The bottom tabs lock into place but the upper ones slip out of the webbing way too easily. If they were a half inch longer I think they'd hold better.
by James M. on 12/05/2020
"DOES NOT FIT A KJW 1911.
Description says it will fit a KJW 1911. Straight up does not. Otherwise the holster fits my friend’s EF 1911 snug
Description says it will fit a KJW 1911. Straight up does not. Otherwise the holster fits my friend’s EF 1911 snug
by Shane L. on 09/14/2020
"Nice quality and very good for the price, Does snap in my WE 1911 Hi Capa as advertised but does fit snugly.
by Truett H. on 05/14/2020
"This is a good holster but I got the pad one and it wiggles a lot but it holds the gun in place the gun does not move only the holster move but just get like the leg drop or the chest one but it holds it good
by Justin G. on 04/09/2018
"I ordered the 1911 Series Hardshell Holster for the MOLLE attachment, and upon arrival of my order, I found that I was sent the wrong holster. The No-Mount holster was sent to me rather than the normal holster. For anyone who is sent the wrong holster, don't fret.... The threads are reversed. Also, the mount that comes with your order (should you be sent the wrong holster) will have a Nut blocking the way of the screw. Simply remove the Nut and insert the screw.
I am rating 3/5 due to the fact I was sent the wrong holster and had to find out myself how to fix it rather than just be sent the correct item. Don't let the 3/5 turn you away though, as it's a great holster. It has incredible retention and a good, clean button release. If the issue had not happened, I would have rated it 5/5.
I am rating 3/5 due to the fact I was sent the wrong holster and had to find out myself how to fix it rather than just be sent the correct item. Don't let the 3/5 turn you away though, as it's a great holster. It has incredible retention and a good, clean button release. If the issue had not happened, I would have rated it 5/5.
by Craig J. on 04/19/2019
"Do not buy the no mount!
I originally bought the drop-leg with holster a couple years back. It lasted a good amount of time with only a couple minor malfunctions. So I figure, why buy a whole new drop leg when the only part that ended up breaking was the holster itself?
I guess you get what you pay for, because the mount I received has a ridiculous design flaw where you cannot put the hex key through the release button, like my previous one. Meaning I have to reach into the mount (tough even with thin fingers), and thread the screw manually. Normally no big deal, but the hex key they included with it won't even fit into the holster to thread it. Even my personal tools can't fit inside the thin holster to thread the screw. I ended up spending 5x what I paid for, on tools alone. So, having to secure the screw completely by hand and pliers, I finally got it all the way in. Until, guess what? The screw provided isn't long enough to reach into the mount and secure itself! Had to unscrew it, again by hand. Tried a longer screw from the hardware store, same diameter, then the washer on the inside of the holster managed to break free, meaning any and all attempts to secure the screw would just spin the washer, effectively rendering the holster useless.
Only reason it's even receiving 2 stars from me is because the original drop leg did well. Just don't order the parts separately, hoping to repair broken holsters. It's a waste of time and money.
I originally bought the drop-leg with holster a couple years back. It lasted a good amount of time with only a couple minor malfunctions. So I figure, why buy a whole new drop leg when the only part that ended up breaking was the holster itself?
I guess you get what you pay for, because the mount I received has a ridiculous design flaw where you cannot put the hex key through the release button, like my previous one. Meaning I have to reach into the mount (tough even with thin fingers), and thread the screw manually. Normally no big deal, but the hex key they included with it won't even fit into the holster to thread it. Even my personal tools can't fit inside the thin holster to thread the screw. I ended up spending 5x what I paid for, on tools alone. So, having to secure the screw completely by hand and pliers, I finally got it all the way in. Until, guess what? The screw provided isn't long enough to reach into the mount and secure itself! Had to unscrew it, again by hand. Tried a longer screw from the hardware store, same diameter, then the washer on the inside of the holster managed to break free, meaning any and all attempts to secure the screw would just spin the washer, effectively rendering the holster useless.
Only reason it's even receiving 2 stars from me is because the original drop leg did well. Just don't order the parts separately, hoping to repair broken holsters. It's a waste of time and money.
by Jaymie C. on 06/26/2022
"Useless!
Cannot even be assembled with the provided hardware. Screw heads too large to fit in recess from secondary nut. Threads too short to reach into holster. Will have to purchase additional parts just to make this functional.
Cannot even be assembled with the provided hardware. Screw heads too large to fit in recess from secondary nut. Threads too short to reach into holster. Will have to purchase additional parts just to make this functional.