Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Free Shipping for Orders over $149. EPIC DEALS released daily!

G&G Polymer 120rd Mid-Cap Magazine for M4 / M16 Series Airsoft AEG Rifles (Color: Desert w/ Black Baseplate / Set of 5)

49 Customer Reviews

by steven k. on 07/08/2015
"I have had one of these magazines since i started airsofting, and it probably will be my last. The magazines have a special lip at the end so every bb gets pushed up into the replica. i have dropped these magazines multiple times and still have no problems with the mag. 10/10 would buy more
by Daniel J. on 02/11/2015
"This may be my favorite M4 AEG magazine. Feels great, nice textured surface, fits in the magwell solidly. Best of all, the extended follower pushes all the last BBs into the gun to be shot. No more 4 or so wasted BBs when you pull the mag out. Why can't they all do that? Also, it looks great and a Magpul ranger plate will fit on the bottom. I am using a G&G gun.
by Daniel J. on 02/11/2015
"This may be my favorite M4 AEG magazine. Feels great, nice textured surface, fits in the magwell solidly. Best of all, the extended follower pushes all the last BBs into the gun to be shot. No more 4 or so wasted BBs when you pull the mag out. Why can't they all do that? Also, it looks great and a Magpul ranger plate will fit on the bottom.
by Paul S. on 10/21/2014
"I bought 2 of these to test out. As Nathan stated, these have an extended bb follower to feed every last bb in the mag. No more wasted bbs, and that's one of my favorite features about this magazine.

I initially had problems feeding in some guns. I noticed that the inside unit fit into the outer shell from the bottom instead of from the top like most mid-caps. The inside unit had a little play and sat a bit low inside the outer shell. I placed a piece of paper between the inside unit and the bottom cap to push the inside unit up to give a snug fit with the hop up unit. Fed perfectly for all my rifles after the slight mod.

BTW, I can fit 125 rounds in each mag.

Feed well and they look great. Well worth!
by Matthew S. on 09/04/2014
"These are the best mid caps that I've come across, I had a set of G&P High RPS mid caps off of here which were good don't get me wrong, but these overall are just that much better.

The external shell for the mid cap is a very high quality polymer which I don't see breaking anytime in the near future, and to get to the internal parts when you go to the oil them, it's as easy as pushing the button down on the bottom and sliding the plate away, so no allen key needed there. These mid caps also an extended feeding tab, so they will feed all 120 bb's unalike most mid caps that leave 1-2 left over so that's a huge plus. The mid caps fit perfectly in my G&G FireHawk that I bought them with, there is basically zero magazine wobble (Go figure G&G mags in a G&G gun :\/) but I have seen them work in non-G&G guns with the same results.
by Matthew S. on 09/04/2014
"These are the best mid caps that I've come across, I had a set of G&P High RPS mid caps off of here which were good don't get me wrong, but these overall are just that much better.

The external shell for the mid cap is a very high quality polymer which I don't see breaking anytime in the near future, and to get to the internal parts when you go to the oil them, it's as easy as pushing the button down on the bottom and sliding the plate away, so no allen key needed there. These mid caps also an extended feeding tab, so they will feed all 120 bb's unalike most mid caps that leave 1-2 left over so that's a huge plus. The mid caps fit perfectly in my G&G FireHawk that I bought them with, there is basically zero magazine wobble (Go figure G&G mags in a G&G gun :\/) but I have seen them work in non-G&G guns with the same results.
by Nathan I. on 05/08/2014
"These mid caps are some of the best you can get for 12$. First off they actually fit my G&G FN2000 with no modification at all, and feed just fine. Anyone who owns a G&G FN2000 know that finding midcaps that are compatible for it is a difficult task but these mags go with them perfectly. They have the extended plastic feeding tabs that help feed down to the last round no problem, similar to the tabs in ERG magazines. I don't know for sure yet, but they look like they can also fit ranger plates.

Pros:
- They fit a G&G FN2000 with no modification
- Great feeding
- Finger grips on mag

Cons:
- None

Great midcaps, I highly recommend them.
by Zach S. on 04/06/2020
"Doesn’t feed properly with the follower. If you remove that (videos on you tube showing you how) it will fix that problem so then they work great. A little thick so if you can I would test one in your rifle if you can before purchase. Fit in a CM16 though
by Justin C. on 05/20/2018
"This product is very good for what it is price wise and quality wise, It does not feel cheap and it is very durable. They have a nice weight to them and fit comfortably in your hands. However, the only reason why that I am giving this product a 4 instead of a 5 is that it was incompatible with by g&g F2000. But other than that, it is a very good product.
by Caleb H. on 01/01/2018
"I've had these mags for about a year and a half now. These mags have feed perfectly for about a year and I cleaned them several times after that. Mags are easy to clean but every BB or so will either dry fire or roll out the top of my gun (no it's not my gun cause it shoots perfect with a G&G hi- cap magazine). But I would definitely recommend these mags for any G&G gun you get! Definitely served me well!
by Clay Y. on 10/30/2016
"I've had these for a year or so now and I'd say they're okay. For 51 dollars at 10.20 per mag I'd say its a good buy. The mags are a sturdy polymer that matches real nice with the other polymer G&G guns (especially the M16 Raider). The only problem you'll run into is the spring getting a little jammed so you have to hit it lightly on another object to force the bb's out. After that the spring will come back up. I've had a mag stop feeding but for the price I'd say it's good. They fit nice in G&G guns. Overall 4/5 will probably buy again in a few months.
by Bruce E. on 06/03/2015
"These magazines work with the APS UAR!

At first, I was skeptical about these mags. They gave a little wobble at first, but not enough for it to fall off. I fed the mags and they did not wobble at all when I put it in the magwell. (Maybe it was just me) I fired a couple rounds with it, and it shot perfectly. I immediately purchased these mags after I tried them out.
Pros:
Good size
Nice material
Good feel
Feeds an APS UAR
(Pro for UAR users that prefer mid caps over hi-caps)
Cons:
A little wobble

Overall, these magazines are perfect.
by Eric H. on 08/12/2014
"I like this mag, but it unfortunately doesn't work with my Elite Force M4 carbine. I still like it and highly recommend it. I especially like it because of its extended BB follower so you can get all the BBs out of the mag without any falling out
by Aidan P. on 06/12/2022
"Will Feed well but the end of one's arm broke and still works fine. But one mysteriously broke and refuses to feed now. Also they need to be filed down a bit on the back in order to fit into my G&G GC16 Predator.
by Brian T. on 12/25/2020
"Not sure what these are supposed to fit in...they dont fit my krytacs...they dont fit my EMGs...they dont fit my KWAs...and BARELY fit my G&Gs. Tight fit af. They will go into the G&Gs, but u have to slam them into place. But once they're in...absolutely no movement what so ever. No feeding problems so far...