(626) 286-0360
Airsoft
Fishing
Air Gun
A&K SVD Dragunov Airsoft AEG Sniper Rifle w/ Metal Gearbox (Model: Real Wood Furniture)
142 Customer Reviews
by Robert R. on 04/08/2014
"Okay. Here's one of my 3 favorite rifles of all time. I recieved this rifle, essentially, free so the only way for me to judge it is performance.
I am in love with this rifle!
I have a backyard range of near 40 yards where I tested this gun. At 35 yards, I found the grouping to be an inch in diameter!!! I was thoroughly surprized by this, as it's a bolt action. I had to re-aim every shot and found my target with ease in the sights. I give this gun 5 / 5 headshots! Message me for more info.
I am in love with this rifle!
I have a backyard range of near 40 yards where I tested this gun. At 35 yards, I found the grouping to be an inch in diameter!!! I was thoroughly surprized by this, as it's a bolt action. I had to re-aim every shot and found my target with ease in the sights. I give this gun 5 / 5 headshots! Message me for more info.
by Robert R. on 04/08/2014
"Okay. Here's one of my 3 favorite rifles of all time. I recieved this rifle, essentially, free so the only way for me to judge it is performance.
I am in love with this rifle!
I have a backyard range of near 40 yards where I tested this gun. At 35 yards, I found the grouping to be an inch in diameter!!! I was thoroughly surprized by this, as it's a bolt action. I had to re-aim every shot and found my target with ease in the sights. I give this gun 5 / 5 headshots! Message me for more info.
I am in love with this rifle!
I have a backyard range of near 40 yards where I tested this gun. At 35 yards, I found the grouping to be an inch in diameter!!! I was thoroughly surprized by this, as it's a bolt action. I had to re-aim every shot and found my target with ease in the sights. I give this gun 5 / 5 headshots! Message me for more info.
by David B. on 04/08/2014
"Well, I got this rifle a few days ago, after tuning in the hop up and putting in some goldenball proslick .20g BB's I decided it was scope worthy, I will be ordering a scope and mount in a few days. Overall, good gun. Although the bolt is difficult to pull back for the first few shots, but hey, no pain no game. Buy it, Mount it with a scope, Obliterate with it.
by David B. on 04/08/2014
"Well, I got this rifle a few days ago, after tuning in the hop up and putting in some goldenball proslick .20g BB's I decided it was scope worthy, I will be ordering a scope and mount in a few days. Overall, good gun. Although the bolt is difficult to pull back for the first few shots, but hey, no pain no game. Buy it, Mount it with a scope, Obliterate with it.
by Tara G. on 04/08/2014
"oh my god I love this gun if you want to get this ita a hell of a good gun 1,000,000,000 thumbs up
Con: hopup is hard to find
Con: if you are looking for a genuine scope on evike they are about $140.00 just as much as the gun WTF but its awesome so if your looking at it now pull that credit card out and buy it
I will make a link to a youtube video that ill make later
Con: hopup is hard to find
Con: if you are looking for a genuine scope on evike they are about $140.00 just as much as the gun WTF but its awesome so if your looking at it now pull that credit card out and buy it
I will make a link to a youtube video that ill make later
by Tara G. on 04/08/2014
"oh my god I love this gun if you want to get this ita a hell of a good gun 1,000,000,000 thumbs up
Con: hopup is hard to find
Con: if you are looking for a genuine scope on evike they are about $140.00 just as much as the gun WTF but its awesome so if your looking at it now pull that credit card out and buy it
I will make a link to a youtube video that ill make later
Con: hopup is hard to find
Con: if you are looking for a genuine scope on evike they are about $140.00 just as much as the gun WTF but its awesome so if your looking at it now pull that credit card out and buy it
I will make a link to a youtube video that ill make later
by John H. on 04/08/2014
"GREAT GUN!!!!
Pros:
Quiet
Mag is HUGE
Metal is everywhere
Everything
Cons:
No Manual
Hopup is hard to find
(If anyone knows PLEASE post)
Pros:
Quiet
Mag is HUGE
Metal is everywhere
Everything
Cons:
No Manual
Hopup is hard to find
(If anyone knows PLEASE post)
by John H. on 04/08/2014
"GREAT GUN!!!!
Pros:
Quiet
Mag is HUGE
Metal is everywhere
Everything
Cons:
No Manual
Hopup is hard to find
(If anyone knows PLEASE post)
Pros:
Quiet
Mag is HUGE
Metal is everywhere
Everything
Cons:
No Manual
Hopup is hard to find
(If anyone knows PLEASE post)
by michael r. on 04/08/2014
"This gun is awesome stock but it is even better with a 170 spring in it this is a must have if you are a truly devoted sniper. it shoots straight and true with a 170 spring in it and btw it is harder to pull with the 170 spring installed.
Pros: It rocks out of the box, the spring upgrade is beyond simple and easy just two screws. it truly is a work of art the craftmanship is superb
Cons: The only negative statement is there is nothing wrong with the gun.
Pros: It rocks out of the box, the spring upgrade is beyond simple and easy just two screws. it truly is a work of art the craftmanship is superb
Cons: The only negative statement is there is nothing wrong with the gun.
by michael r. on 04/08/2014
"This gun is awesome stock but it is even better with a 170 spring in it this is a must have if you are a truly devoted sniper. it shoots straight and true with a 170 spring in it and btw it is harder to pull with the 170 spring installed.
Pros: It rocks out of the box, the spring upgrade is beyond simple and easy just two screws. it truly is a work of art the craftmanship is superb
Cons: The only negative statement is there is nothing wrong with the gun.
Pros: It rocks out of the box, the spring upgrade is beyond simple and easy just two screws. it truly is a work of art the craftmanship is superb
Cons: The only negative statement is there is nothing wrong with the gun.
by nick s. on 04/08/2014
"This gun is very worth the money. I bought it (elsewhere, no pre-order involved while it was still in stock) around July and have had it for around 4 months now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
by nick s. on 04/08/2014
"This gun is very worth the money. I bought it (elsewhere, no pre-order involved while it was still in stock) around July and have had it for around 4 months now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
by chris d. on 11/29/2013
"My first gun purchase in several years and with a little TLC it is no disappointment
Out of the box the handguard was very loose and the plate which secures it (at the skinny end, closer to the muzzle) was moving around.
Turns out, the set screw the factory used was much too small to bridge the gap between the plate and the outer barrel. I replaced the tiny set screw with a ten millimeter piece and now the plate is very secure. If you have the same issue, buy an M3x10mm set screw. These are used for certain R/C cars and are readily available online or at better hobby stores
Also, the locking pin on the handguard plate must be removed in order to slide up/off the plate. Some online videos indicate that it only needs to be turned to allow the plate to slide off. Not true. Rotate the pin so the locking tab is free of the plate then pull the pin straight out. It is a very tight fit
Either AIM/TOP or Evike filled the set screw hole at the flash hider/front sight piece with solder. Why is anybody's guess. It took a lot of effort to remove the solder and get to the set screw. Again, the set screw was a bit small. I swapped in an M4x8mm screw I bought at Home Depot
I also replaced the larger handguard plate set screw with an M4x6mm screw that I bought at Home Depot
Gun assembles easily--only have to remove the spring guide block (two screws) then screw the stock on with three screws. Oddly, the factory provides what look like drywall screws. They seem to work well enough though
Cheek rest looks on the cheap side, and the locking mechanism is rickety but functional. There is no way to use the rest and look down the sights, even without a mask on. Use of a scope allows use of the cheek rest, at least when not wearing a mask
The finish on the metal parts (most of the gun) was very even and well done. The plastic furniture is well molded and sturdy. The gun overall is very solidly built
Magazine fits well and feeds well, but is a little difficult to load owing to the slanted design of the feed mechanism. I did experience BBs dribbling out the barrel when first putting the magazine into the gun. After the first shot it is fine. Only happens when first popping the mag in
I bought the Matrix (AIM/TOP) scope mount and it fits great
The Matrix bipod also fits perfectly on the receiver
Cocking handle is tough to pull. Get the AIM extra large bolt handle
Gun shoots very hard
While not totally authentic, since it's a springer, I would highly recommend this gun
Out of the box the handguard was very loose and the plate which secures it (at the skinny end, closer to the muzzle) was moving around.
Turns out, the set screw the factory used was much too small to bridge the gap between the plate and the outer barrel. I replaced the tiny set screw with a ten millimeter piece and now the plate is very secure. If you have the same issue, buy an M3x10mm set screw. These are used for certain R/C cars and are readily available online or at better hobby stores
Also, the locking pin on the handguard plate must be removed in order to slide up/off the plate. Some online videos indicate that it only needs to be turned to allow the plate to slide off. Not true. Rotate the pin so the locking tab is free of the plate then pull the pin straight out. It is a very tight fit
Either AIM/TOP or Evike filled the set screw hole at the flash hider/front sight piece with solder. Why is anybody's guess. It took a lot of effort to remove the solder and get to the set screw. Again, the set screw was a bit small. I swapped in an M4x8mm screw I bought at Home Depot
I also replaced the larger handguard plate set screw with an M4x6mm screw that I bought at Home Depot
Gun assembles easily--only have to remove the spring guide block (two screws) then screw the stock on with three screws. Oddly, the factory provides what look like drywall screws. They seem to work well enough though
Cheek rest looks on the cheap side, and the locking mechanism is rickety but functional. There is no way to use the rest and look down the sights, even without a mask on. Use of a scope allows use of the cheek rest, at least when not wearing a mask
The finish on the metal parts (most of the gun) was very even and well done. The plastic furniture is well molded and sturdy. The gun overall is very solidly built
Magazine fits well and feeds well, but is a little difficult to load owing to the slanted design of the feed mechanism. I did experience BBs dribbling out the barrel when first putting the magazine into the gun. After the first shot it is fine. Only happens when first popping the mag in
I bought the Matrix (AIM/TOP) scope mount and it fits great
The Matrix bipod also fits perfectly on the receiver
Cocking handle is tough to pull. Get the AIM extra large bolt handle
Gun shoots very hard
While not totally authentic, since it's a springer, I would highly recommend this gun
by Aaron A. on 01/24/2013
"UPDATE
So I got a dud, and after getting a dud L96 a few years back I almost lost my faith in bolt actions springers. BUT THEN- Evike repaired it for free, and the front sight wobble is fixed, my hop up is fixed, and the gun (before hop up adjustments and scope adjustments) is already nailing head sized targets at 75-125 feet. when hop is adjusted I estimate 170 as its top range. Great purchase, great retailer.
Pros:
High quality construction
430 fps with .30g BB
Accurate
Quiet
Sexy
Comfortable
Cons:
Hard to assemble with all the screws
Hop up adjusting is a hassle
Mag can be difficult at first
Takes a little bit to "break in"
So I got a dud, and after getting a dud L96 a few years back I almost lost my faith in bolt actions springers. BUT THEN- Evike repaired it for free, and the front sight wobble is fixed, my hop up is fixed, and the gun (before hop up adjustments and scope adjustments) is already nailing head sized targets at 75-125 feet. when hop is adjusted I estimate 170 as its top range. Great purchase, great retailer.
Pros:
High quality construction
430 fps with .30g BB
Accurate
Quiet
Sexy
Comfortable
Cons:
Hard to assemble with all the screws
Hop up adjusting is a hassle
Mag can be difficult at first
Takes a little bit to "break in"
by Anthony D. on 01/11/2013
"Best sniper rifle I ever owned by far. VERY accurate and consistent to 200 feet. This gun is really awesome. The only problem I had was putting on the scope mount, which is fixable. This gun is highly recommended.