Evike.com BAMF GEN2 Polymer 190rd Mid-Cap Magazine for M4 Series Airsoft AEG Rifles (Model: Red / Single Mag)

"I just got my tan bamf Gen 2 190 rd mid caps. The fitment is good but I have the soft side of Velcro in my mag well so all mags fit snug. One thing I was not expecting on the mid caps though is the removable base plate. That removable base plate is for the flash mags so you can pull the string thing but that is not a feature on the mid cap obviously. Why is that removable base plate there for the mid cap? I don't know. It comes off incredibly easy, like it will come off if you smack the magazine the right direction. my mags go upside down in my plate carrier and I feel like these base plates will fall off just running around. I'm going to super glue them in place because I know I'll lose them and then what? I definitely will not give this product a five-star review even if the magazine performs flawlessly just because of the fact these base plates come off incredibly easy. If I could post a video I would. You literally smack the magazine and the base plate comes 99% off. I know this, I will never buy these mags again because of this. Not cool evike, and definitely not cool for never mentioning this. I can understand if it was one magazine or whatever but I bought three of them they all came in today and they're all the same. loose base plate.

"I got these mags with a deal on the MCX, and they did not feed fantastically, and they are huge (as they are 190 rd midcaps). I think i just got a lemon. For the price these are good mags!

"Mag seems to be pretty quality but they did not fit in the Matrix Warlord which is the gun I purchased it for.

"So I am relatively new to airsoft (2 years in) and I got two of these in one of the gun packs I got. The feeding is fine but there are a few problems that drive me NUTS.
1. Base blate: The baseplates on these mags are always coming off or slide 3/4's of the way off and they won't stay on. I have to superglue them to stay on. At this point, I can shake them off.
2. It doesn't lock into one of my guns (but the dimensions fit into the mag well) and is a VERRY loose fit in a different gun.
There have been absolutely no feeding issues tho, and after a year of using them, I haven't had the need to clean them out either so that's good. I would give these a higher rating and may even recommend them due to them being so cheap but those two things are two out of three of the biggest things to look for in a mag so idk what to say. Love Evike.com's other products tho. Have the goggles and they work amazing! With I could say the same about these...

"WARNING

These mags are a looser fit than their predecessor and DO HAVE issues with G&G style .556 magwells. Even in testing, these mags do not consistently feed past 1000rpm.
(10 Magazines tested at 800, 1000, 12000, and 1800 rpms while locked in place via clamp in G&G ARP556, multiple Combat machines, Kriss and Trident.)
The Gen. 1 does feed consistently in these models, but must also be modified slightly to align with the hip-up receiver tube.

"These mags feed and look great. The reason I am giving 3 stars is because the baseplate slides off but that can be fixed with some tape. The main reason is the cheap plastic housing. BB's will punch straight through the mag and leave holes. I never had this problem with the BAMF gen 1 mags. I would buy more but these mags are not durable especially for cqb.

"These don’t fit my G and G cm16 raider m4 so they won’t fit others, I assume. It will feed, but it doesn’t fit properly in the mag well. When the description said m4/m16, I said, “Yay! This is just what I need,” but no. Just a heads up.

"I love these mid caps. Great capacity and it looks cool. The only gripe about this is the cheap plastic housing. It got hit with a bb and it punched a hole in the front of it.

"Used on a G&G arp 556, description says it will fit on G&G but that’s not the case, to fit you have to use hard force so that’s not a good thing, to fix it I got a grinding tool to grind where the mag locks. Just a little grinding will do the trick and they fit perfect. They feed good and look nice.

"They look really nice but don’t fit well and don’t feed in my rifle-
Helios Knight's Armament Licensed SR-16E Mod2 MLOK Airsoft AEG Rifle. The gen 1 bamf fit in my rifle so I was expecting these would as well. Will update depending how returning goes.

"I usually don’t write reviews, but I’ve had a lot of feeding issues with these. I bought 5 of these and have had many friends use them. They gave feeding issues to all of my friends in all of their guns. They have been ran through my KWA VM4A1 with a P* Jack, a Gen 2 Lancer Tactical, an Elite Force M4, and a CM16 Combat Machine. I wanted to rate these higher, but I just can’t.

"Honestly, not too much of a fan. They feed and fit well, but I have some gripes that made me glad I only bought one.

As stated by someone else here, the disassembly plate moves around during play. It never fell off for me, but it slides forward (but is still retained) which is pretty annoying.

But the real kicker is how much disassembly SUCKS.
You need a small nail/ roll pin punch to knock out a pin, only to have to unscrew some 10 screws to disassemble. It really is so annoying, I can't imagine doing it for more than one. I compare this to the KWA K120: Disassembles like a real PMAG, with only 4 screws. You can disassemble the K120 on the field or a hotel room should you have to.

Really if you play indoors, these are great. But if you play in dusty areas like SoCal or get dirty and need to clean your mags often, look elsewhere.

"Great looking mags. I got a pack of 5 for my b-day, here's how the following few months went:
They have a very unreliable feeding problem where just bellow the lip it's too wide and the bbs get stuck too far apart and will not feed until you take it apart. Also, the cool-looking grip at the bottom of the mag has a tendency to slip off when pulling it out of my mag pouches. Other than that they work when they work. Fully loading it with a speed loader I got 195 rounds, and so far no trouble with high rps feeding.

Hey, overall good mags for testing at home but not great in the field.

"The build quality is okay on these mags for starters.

But personally the compatability of these mags with certain receivers is wayyyy too limited. I've got 5 M4's and these fit (not easily) into only one.

Second issue is that the little lip on the bottom is incredibly annoying. Constantly sliding out and everything. It won't come off but it gets in the way of trying to reload.

And my last issue is that I bought a five pack and I've had nothing but feeding issues. And it's not my hopup or mag seating. It's literally the mag.
The follower and the spring at too weak/ get stuck so often that they won't feed the BBs.

I'm mid game, have to take the mag out, smack it a bunch to get the follower to actually feed the BBs. Only for it to shoot one before the follower is stuck again. All five mags are like this