Matrix Airsoft Mock Silencer / Barrel Extension (Model: T-800 Head / 150mm)
206 Customer Reviews
by Mitchell R. on 08/16/2014
"I like the fit and feel a lot. It seems sturdy, although Evike has changed the diameter of their tubes so it isn't compatible with their old silencers. But this one is great. I'm getting another one sooner or later
by Jared M. on 07/20/2014
"Great mock silencer!
Pros:
Looks real
Perfect length, not to long not to short
Light weight
Positive and negative threads
Cons:
Scratches easily
Makes a high pitch noise when your screw it on
Over all a GREAT mock silencer for the money
Pros:
Looks real
Perfect length, not to long not to short
Light weight
Positive and negative threads
Cons:
Scratches easily
Makes a high pitch noise when your screw it on
Over all a GREAT mock silencer for the money
by Dylan P. on 03/17/2014
"So I just received this today, and overall, i'm impressed. I managed to tear my old flash hider off, and stick this one on, however, I might have stripped the threads. After I put it on, I couldn't take it off, (not that I have any plans to). The silencer has 2 sides, in case one side doesn't fit, the other side will.
A side note to anyone putting this on a G36 of any style with the original hand guard: It won't fit without seriously tearing a hole in the slot where the silencer sticks out. I recommend getting the style of hand guard with a wider opening in the front, like i'm about to do.
All in all though, I highly recommend this and a longer inner barrel for anyone.
A side note to anyone putting this on a G36 of any style with the original hand guard: It won't fit without seriously tearing a hole in the slot where the silencer sticks out. I recommend getting the style of hand guard with a wider opening in the front, like i'm about to do.
All in all though, I highly recommend this and a longer inner barrel for anyone.
by william r. on 02/18/2014
"Love it. Could not be more happy with it. It almost 6 inches long, all metal, and still very
by Amanda D. on 01/16/2014
"Awesome aesthetics! My favorite feature is the ability to unscrew either end. I have a negative threaded barrel, so I removed the positive threaded end and fit the suppressor over my barrel and was able to screw it on. With a couple rubber O-rings underneath I was able to make it flush with the tip of the outer barrel, effectively reducing the overall length of the gun by about an 1". It does go inside my RIS a few inches, but I think it looks cool.
by Lucas P. on 12/13/2013
"I just got my matrix op. barrel extension. I was very pleased that it I ordered it on Saturday and received it on Friday all the way in Maine for just 5 bucks shipping. The barrel extension is great, I put it on my JG m4 and it looks incredible. For $24 it was the best and cheapest upgrade I've made to my gun so far. I would recommend this to anyone especially because the finish appears to be of very high quality and it can fit onto any 14mm thread because it has positive on one side and negative on the other. If anyone was wondering it is just hollow on the inside, not like some of the others I've seen that have foam. For $24 you shouldn't even think about it, just buy it.
by Kristian P. on 11/26/2013
"This is a really awesome mock silencer. It covers up my longer inner barrel on my M4 and makes the gun look really good especially with the laser engraving on it. I would definately recommend this mock silencer to anyone who wants to cover up an inner barrel or make their gun look cooler.
by Brian L. on 09/13/2013
"Fit perfectly. CCW on the adapter and clockwise on the first piece issue mentioned above does happen but a little thread locker and good to go. (Or just use a padded wrench and tighten it down good)
Also.. even without the spacer, this still allows a 407 MM barrel to be fully covered on my KA p90. Sits perfectly flush with the end of the Silencer. With the space ring the barrel is recessed inside the silencer nicely.
Did NOT come with orange tip. Issue for me, Others prefer it. Wife insisted on the bright orange tip. I found some of her florescent orange nail polish. Worked perfectly. Am also guessing I won't hear the same complaint on other accessories.
Also.. even without the spacer, this still allows a 407 MM barrel to be fully covered on my KA p90. Sits perfectly flush with the end of the Silencer. With the space ring the barrel is recessed inside the silencer nicely.
Did NOT come with orange tip. Issue for me, Others prefer it. Wife insisted on the bright orange tip. I found some of her florescent orange nail polish. Worked perfectly. Am also guessing I won't hear the same complaint on other accessories.
by adam b. on 07/30/2013
"Disappointed that this didnt come with foam inserts to stablize the inner barrel like some said it did but overall great buy for the price. I figured out that you can drill the center out of a water bottle cap and they fit perfectly inside to act as the foam. Before figuring this out, I couldn't use this as my inner was too wabbley. Afterwards though, It was able to hit quarters 180ft away with my g&g m4 shorty.
Pros
Cheap
Lightweight
Looks great
Cons
No stablizing inside(quick fix with water bottle caps though)
Pros
Cheap
Lightweight
Looks great
Cons
No stablizing inside(quick fix with water bottle caps though)
by chris w. on 06/21/2013
"For the price...I'm pretty impressed. It's light weight and appears to be very well made. The black coating and white lettering look good and appear to be pretty durable. If you're looking for an inexpensive barrel extension, this is the way to go. Put a little lock-tite on the threads, screw snuggly into place and you're good to go.
by Scott B. on 04/24/2013
"This mock suppressor is sweet
Got this at the evike.com superstore and have had only ONE problem with it
The only problem is that I thought that it would work on my WE G17
It fits but wont cycle the new round
Other than that it gives my G17 a SUPER AWESOME look
Thanks Evike.com
Got this at the evike.com superstore and have had only ONE problem with it
The only problem is that I thought that it would work on my WE G17
It fits but wont cycle the new round
Other than that it gives my G17 a SUPER AWESOME look
Thanks Evike.com
by Scott B. on 04/24/2013
"This mock suppressor is sweet
Got this at the evike.com superstore and have had only ONE problem with it
The only problem is that I thought that it would work on my WE G17
It fits but wont cycle the new round
Other than that it gives my G17 a SUPER AWESOME look
Thanks Evike.com
Got this at the evike.com superstore and have had only ONE problem with it
The only problem is that I thought that it would work on my WE G17
It fits but wont cycle the new round
Other than that it gives my G17 a SUPER AWESOME look
Thanks Evike.com
by Scott B. on 04/24/2013
"This mock suppressor is sweet
Got this at the evike.com superstore and have had only ONE problem with it
The only problem is that I thought that it would work on my WE G17
It fits but wont cycle the new round
Other than that it gives my G17 a SUPER AWESOME look
Thanks Evike.com
Got this at the evike.com superstore and have had only ONE problem with it
The only problem is that I thought that it would work on my WE G17
It fits but wont cycle the new round
Other than that it gives my G17 a SUPER AWESOME look
Thanks Evike.com
by Steve N. on 04/24/2013
"Extension measures to roughly 4.5 inches. Completely hollow.
Has clockwise 14mm threads on one side, counter clockwise 14mm threads on the other. A VERY good thing is the extension come apart in three pieces: tube, and two threaded ends. This helps to keep the trademarking and graphics from not being backwards and upside down.
Recommend having lock-tight or some glue on hand. As i was tightening the extension (CCW) i kept accidentally unscrewing the extension itself until i put a little bit of glue on the threads and made sure it was secure.
Also recommend you stuff the negative space inside with something so there's no play in the barrel. I used cotton balls.
Has clockwise 14mm threads on one side, counter clockwise 14mm threads on the other. A VERY good thing is the extension come apart in three pieces: tube, and two threaded ends. This helps to keep the trademarking and graphics from not being backwards and upside down.
Recommend having lock-tight or some glue on hand. As i was tightening the extension (CCW) i kept accidentally unscrewing the extension itself until i put a little bit of glue on the threads and made sure it was secure.
Also recommend you stuff the negative space inside with something so there's no play in the barrel. I used cotton balls.
by Tyler F. on 04/24/2013
"I recently bought this suppressor and it makes my jg gen 4 g36c look AWSOME!!!! its nice because it has the two ends that can seperate so you can spin the main peice around so the logo isn't upside down or backwards. overall a great buy for just 28 buck.