A&K SVD Dragunov Airsoft AEG Sniper Rifle w/ Metal Gearbox (Model: Real Wood Furniture)
142 Customer Reviews
by Aaron M. on 09/25/2012
"This is a great sniper rifle... i cant really say much since i havent gotten a scope for it or shot any bbs heavier than .25s. but excellent gun for the money. i would recommend getting a REAL scope for it, if you dont want to buy a rail adapter. dont buy the airsoft PSO-1 scopes. the cheapest you can find is a Romanian PSL scope for 100.
Pros:
Powerful - about 490-530 fps w/ .2s
accurate
quiet
spring powered (can be a con)
uses AEG hopup and barrel
can be switched to gas
a breeze to dissasemble
Cons:
maybe not as high quality as some others, but still good for $125
other than that, not many cons. its a very reliable gun over all. i recommend it to anyone
Pros:
Powerful - about 490-530 fps w/ .2s
accurate
quiet
spring powered (can be a con)
uses AEG hopup and barrel
can be switched to gas
a breeze to dissasemble
Cons:
maybe not as high quality as some others, but still good for $125
other than that, not many cons. its a very reliable gun over all. i recommend it to anyone
by lyndon w. on 05/04/2012
"this gun is great for anyone looking for a somewhat cheap yet high qulity sniper. the fps is great even when using heaver bb's such as .25's witch i recomend i have not tryed it with higher than .25's. this guns accuracy is good and unless your going to be play in a large feild not need for a scope i have exprienced a few feeding issuse and double loading but nothing that will over some the many pros of the gun
pros:
high fps
accuracy
iron sights
great build quailty(polyimer and metal)
cons
minor feeding/jamming issuse
heavy (maybe a good thing for realismim)
pros:
high fps
accuracy
iron sights
great build quailty(polyimer and metal)
cons
minor feeding/jamming issuse
heavy (maybe a good thing for realismim)
by Nancy C. on 03/16/2012
"let me start off by saying this gun is a beast it functions at a high level, and adds a factor of intimidation with 525 fps. But when playing out doors it would be better to get a heavier round since its so powerful and since your a sniper you need range without the wind resistance.
Pros:
-high powered
-accurate
-very sturdy
-easy to strip and upgrade
-cheap
Cons:
-can jam if you multi- cock
-small heavy bolt
Over all a good gun
Pros:
-high powered
-accurate
-very sturdy
-easy to strip and upgrade
-cheap
Cons:
-can jam if you multi- cock
-small heavy bolt
Over all a good gun
by Ethan Y. on 02/10/2012
"Good gods! This gun is fantastic!
Just got it today, the order went through Monday and it shipped to Indiana in 5 days. Fantastic! Pulled it out of the box and was immediately surprised by the awesome construction. Built like a rock.
Went outside (live in a huge woods) and started shooting. I was hitting targets 25 yards away like it was nothing. (Some I'm sure were farther out, but I do not know their exact distance)
Great gun, great price. Totally worth it.
Just got it today, the order went through Monday and it shipped to Indiana in 5 days. Fantastic! Pulled it out of the box and was immediately surprised by the awesome construction. Built like a rock.
Went outside (live in a huge woods) and started shooting. I was hitting targets 25 yards away like it was nothing. (Some I'm sure were farther out, but I do not know their exact distance)
Great gun, great price. Totally worth it.
by Oscar R. on 12/23/2011
"Just got this sniper today as a Christmas present, my only complaint is that my stock wobbles. However the rest of the SVD is incredibly sturdy and lightweight. The bolt out of the box is quite hard to cock back but you just have to get used to it.
+Light Weight
+High Quality Plastic & Metal
+Accurate
+High FPS
+1:1 Scale
+Cheek Rest
+Affordable
+Can be easily upgraded
+Hop up adjustment
+Great paint job
-Wobbly Stock
Scope Mount recommendations:
Matrix Steel Precision AK / SVD Type Tactical Scope Mount Base ($20)
+Light Weight
+High Quality Plastic & Metal
+Accurate
+High FPS
+1:1 Scale
+Cheek Rest
+Affordable
+Can be easily upgraded
+Hop up adjustment
+Great paint job
-Wobbly Stock
Scope Mount recommendations:
Matrix Steel Precision AK / SVD Type Tactical Scope Mount Base ($20)
by Tony D. on 11/20/2011
"Indeed worth every penny. You get what you pay for with this rifle. Well built, and solid as a rock. Maybe a little play with the trigger, but nothing like a little shimming for that would solve it, but overall, a strong and accurate rifle. 5/5 because of its value.
by Dylan H. on 11/17/2011
"Let me just say that this gun is a beast. 500 fps right out of the box. All metal except for the handguard and stock, high quality and sturdy, real wood upgrade would make it awesome.
Pros:
High Fps
All metal
Sturdy plastic parts
Nice sized mag for a sniper
easy to upgrade (wood, scope, spring)
Not that hard to cock
Cons:
May be hard to cock for some? noobs.
Check out Junglemanairsoft on youtube for a full video review and shooting test!
Pros:
High Fps
All metal
Sturdy plastic parts
Nice sized mag for a sniper
easy to upgrade (wood, scope, spring)
Not that hard to cock
Cons:
May be hard to cock for some? noobs.
Check out Junglemanairsoft on youtube for a full video review and shooting test!
by Andrew N. on 11/17/2011
"Sturdy, Efficient, Accurate. I bought AIM AK Scope mount, and it does fit if you take the dust cover off and put it back on after sliding on the mount, but it's not ideal. go with the Matrix QD one instead, or find a legitamate PSO-1 or POSP.
Cocking isn't hard after practice. Middle and Index, between top and middle knuckles, swift movement. I can fire off several shots in succession by doing this. Also it doesn't hurt to silicone lube the rails of the piston beforehand.
Pros:
Accurate
Not an L96/M24
Full Metal
Above average internals, last forever
High FPS and easy downgrade/upgrade
Cons:
Not for the weak
Spring powered (release that gas mechanism, Evike!)
Scope Mounts incompatibility (use either leapers QD or Matrix QD)
Actual scopes are quite expensive (120 clone, 180 real)
Cocking isn't hard after practice. Middle and Index, between top and middle knuckles, swift movement. I can fire off several shots in succession by doing this. Also it doesn't hurt to silicone lube the rails of the piston beforehand.
Pros:
Accurate
Not an L96/M24
Full Metal
Above average internals, last forever
High FPS and easy downgrade/upgrade
Cons:
Not for the weak
Spring powered (release that gas mechanism, Evike!)
Scope Mounts incompatibility (use either leapers QD or Matrix QD)
Actual scopes are quite expensive (120 clone, 180 real)
by Andrew N. on 11/17/2011
"Sturdy, Efficient, Accurate. I bought AIM AK Scope mount, and it does fit if you take the dust cover off and put it back on after sliding on the mount, but it's not ideal. go with the Matrix QD one instead, or find a legitamate PSO-1 or POSP.
Cocking isn't hard after practice. Middle and Index, between top and middle knuckles, swift movement. I can fire off several shots in succession by doing this. Also it doesn't hurt to silicone lube the rails of the piston beforehand.
Pros:
Accurate
Not an L96/M24
Full Metal
Above average internals, last forever
High FPS and easy downgrade/upgrade
Cons:
Not for the weak
Spring powered (release that gas mechanism, Evike!)
Scope Mounts incompatibility (use either leapers QD or Matrix QD)
Actual scopes are quite expensive (120 clone, 180 real)
Cocking isn't hard after practice. Middle and Index, between top and middle knuckles, swift movement. I can fire off several shots in succession by doing this. Also it doesn't hurt to silicone lube the rails of the piston beforehand.
Pros:
Accurate
Not an L96/M24
Full Metal
Above average internals, last forever
High FPS and easy downgrade/upgrade
Cons:
Not for the weak
Spring powered (release that gas mechanism, Evike!)
Scope Mounts incompatibility (use either leapers QD or Matrix QD)
Actual scopes are quite expensive (120 clone, 180 real)
by Stephen Z. on 11/17/2011
"Sniper's overkill, whatever you're trying to hit, if it's under 250 feet, then I feel sorry for it. Really a great sexy gun. 480 fps gives it great range and the rumor about cocking it, the spring wears down after awhile. This new version feature and m150 aeg spring, and a 590mm barrel. If you don't want the jg plastic excuse of an svd, or can afford king arms, g&p, or classic army's svd, this is the best choice.
Pros
Accurate
High fps
Needs very few upgrades, all you need is a hop up bucker, and a tighbore barrel(optional since the barrel of this gun is so long, and spring(if you think 480-500 isn't enough)
Sexy, 1:1 scale
Cons
Heavy, bulky
Very hard to cock(depends)
Pros
Accurate
High fps
Needs very few upgrades, all you need is a hop up bucker, and a tighbore barrel(optional since the barrel of this gun is so long, and spring(if you think 480-500 isn't enough)
Sexy, 1:1 scale
Cons
Heavy, bulky
Very hard to cock(depends)
by Stephen Z. on 11/17/2011
"Sniper's overkill, whatever you're trying to hit, if it's under 250 feet, then I feel sorry for it. Really a great sexy gun. 480 fps gives it great range and the rumor about cocking it, the spring wears down after awhile. This new version feature and m150 aeg spring, and a 590mm barrel. If you don't want the jg plastic excuse of an svd, or can afford king arms, g&p, or classic army's svd, this is the best choice.
Pros
Accurate
High fps
Needs very few upgrades, all you need is a hop up bucker, and a tighbore barrel(optional since the barrel of this gun is so long, and spring(if you think 480-500 isn't enough)
Sexy, 1:1 scale
Cons
Heavy, bulky
Very hard to cock(depends)
Pros
Accurate
High fps
Needs very few upgrades, all you need is a hop up bucker, and a tighbore barrel(optional since the barrel of this gun is so long, and spring(if you think 480-500 isn't enough)
Sexy, 1:1 scale
Cons
Heavy, bulky
Very hard to cock(depends)
by nick s. on 11/17/2011
"This gun is very worth the money. I bought it (elsewhere, no pre-order involved while it was still in stock) around July and have had it for around 4 months now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
by nick s. on 11/17/2011
"This gun is very worth the money. I bought it (elsewhere, no pre-order involved while it was still in stock) around July and have had it for around 4 months now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
by nick s. on 11/17/2011
"This gun is very worth the money. I bought it (elsewhere, no pre-order involved while it was still in stock) around July and have had it for around 4 months now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
Stock Stats:
FPS: 4/5 (480 w/ .20g bb)
Accuracy: 5/5 (can easily hit a head sized target at 40 meters)
Barrel length: Not sure (some where between 550mm and 600mm)
Barrel Compatibility: unsure (too good to need to replace)
Spring Compatibility: Uses standard AEG springs
I have put an M150 AEG spring into mine (which takes about 5 minutes to complete) and the FPS has jumped to around 520 FPS w/ .20g bb's.
General Take Down:
1) Rotate pin above the trigger around the projection that holds it in place so that it points down.
2) Lift the top piece above the bolt off.
3) Take the two hex head screws out of the spring guide
4) Push spring guide forward, then pull up and out
Hop up adjustment:
1) Take off piece above bolt (see disassembly)
2) Pull Bolt back as if to cock
3) Tighten middle hex head screw to "hop up", loosen to "hop down"
Pros:
Great Stock (performance wise, not the rifle stock)
Lightweight
accurate
upgradeable
Nice anodized blue metal hop-up and piston set
Cons:
A pin that holds the handgaurd and barrel in place fell out of mine in the middle of the woods. I recommend reinforcing this as it is only held in by maybe 1/16th inch.
Overall:
Best sniper I have ever used stock.
Easily out ranges other upgraded snipers.
Most accurate airsoft gun I've ever shot (my other is an M14 at 434FPS w/ 650mm tightbore).
A must buy if you can find it, but these have been on pre-order for almost a half year now.
by Michael R. on 11/17/2011
"This gun is awesome stock but it is even better with a 170 spring in it this is a must have if you are a truly devoted sniper. it shoots straight and true with a 170 spring in it and btw it is harder to pull with the 170 spring installed.
Pros: It rocks out of the box, the spring upgrade is beyond simple and easy just two screws. it truly is a work of art the craftmanship is superb
Cons: The only negative statement is there is nothing wrong with the gun.
Pros: It rocks out of the box, the spring upgrade is beyond simple and easy just two screws. it truly is a work of art the craftmanship is superb
Cons: The only negative statement is there is nothing wrong with the gun.