Evike.com CNC Aluminum Propane Adapter w/ Integrated Silicone Port (Package: Adapter)

"Came with a bit of the o ring sticking and leaked so i had to loosen it then tighten it again. That was the only problem and just keep it tight so it doesnt leak.

"Great adapter for my friend's KWA Mac 11 (It's a fricken beast). We did have some leaking problems (It leaked on my hand and I got frost nip), but after doing some tweaking all I had to do was tighten the part that goes into the can ( a stem-like piece) and it never leaked again. Also, way cheaper than buying green gas ( Smells like Green Bean Casserole with a lil bit 'O fart (Not horrible).

"good, sturdy adapter. the bottom o ring kept getting blow out enough that the adapter leaked on me. i tightened the nut holding the o ring and this problem has been fixed. but if silicon is not kept full the adapter gets stuck open, i am tying to tune the tightness so that it does not leak nor get stuck open.

"Had this adapter for a year and a half then dropped it and the tip popped off. This a great adapter but just make sure you don't drop it.

"lasted about a year and a half of moderate abuse.finally the top part where the gas comes out just kinda fell off whilst i was filling an empty mag. nothing really bad to say about it except that it wont last forever.

"the only reason it gets 4 stars is because the other day the propane adapter silicon port when i opened it to release the gas to remove the adapter the adapter had the tank valve pressed in and was stuck pressed in so i lost over 3/4 of a brand new tank of propane but other than that its a good adapter if you don't ever wanna remove it.

"Good for the money, works like advertised. only con is the output spike is a little weak, alluminum, just dont drop it

"Bought it thinking, ok, metal definitely better than plastic. Had many problems to begin with. Leaked everywhere and I couldn't figure out the problem. I tightened the nut in the bottom and used plumbers tape around the propane tank and so far so good. We'll see how long it lasts.

"Had high hopes to give propane a try, upon getting to the field and trying it out I found it wasn't filling my mags. The part that sticks into the valve that gets pushed in was STIFF, so stiff in fact that once i did finally get it to fill a mag, it stayed full open and blew propane allover the place until I unscrewed it off because the spring inside bound up.

I'd rather give a 0/5 if i could. Don't question saving some money, get a better adapter.