Matrix Performance Airsoft AEG Motor (Type: Magnum - High Torque / Long)

"if you are wanting your gun to shoot higher fps buy this motor. if you want it to have a better rof then buy the blue one. But i recomend this one because it will raise the rof soch because you will strip gears and be dry firing a lot.

"wat do u think it would do wit a 8.4 1500mah************************************************

"do you think this motor or the matrix 3000 turbo is beter in an echo 1 wit a 9.6 2ooomah bttery wt do u think the rate of fire will be wit the magnum?

"This motor won't fit an M4, you would need to use a Long type motor, not a short type. As for your other question, if the airsoft store you bring it to has an airsmith, then yes, they could install it. If you have any other questions, go to the forum and see what you can find.

"will this fit the JG M4 TSF.
and would an airsoft store install if for me

"This is a great motor that is just as good as the systema for half the price. The magnum Works well for high torque or high speed. I use them in all my aeg's.

"I have a echo1 g36 and i am looking to put this motor or the turbo version into it with an m120 spring, i'm pretty new to airsoft and i was wondering which one (if not both) of these motors can handle the m120, and still increase my ROF. (the echo1 g36 is stock)

"This motor will work fine in all Echo1 AEG. Magnum motors are not turbo motors where they spin too fast sometimes, so it pretty much will work for any spring from M90~ M170.

"Motor installation is pretty simple. Just make sure it is not TOO IN, or TOO out. You'll know what I mean.

take out the heat sink on the bottom of your pistol grip,

remember how the wires connects and aligns (VERY IMPORTANT)

Then disconnect the two wire (very easy)

Remove the motor, put in the new one, plug in the two wire.

Screw your heat sink back on.

Adjust the motor spacer. (If you screw it too deep in, it won't turn, slowly turn it outwards until your gun fires smoothly.)

"This is a super high performance motor. It will work on any M4 series rifle and give you insane cycle rate.

Make sure your gun has heat sink (the cover for the motor grip has holes for air to flow thru because high performance motors can heat up if you use it continuously for a long period of time)

Good news is, its high torque and high speed, unlike most traditional high speed motors where they can only pull a M100 or below spring. This Matrix turbo motor can pull up to a M120. (Infact, at high power, it slows down the speed and the heat output too)

"This is a standard size long type motor. So yes, it will fit a M4 / M16 series and all the other variant such as Scar, FN2000, 416, SR-25....ect

Very high power motor, the magnet power is really strong, just like the Systema Magnum motor.

"If you are trying to pull a high power spring get the magnum. If you are pulling / shooting under 360 then you can consider the turbo for higher rate of fire.

"awesome motor. after frying my stock ca motor i got this one. i no systemas are the best motors you can buy, but whenfunds are short you have to make do.

i got this motor for my ca m15a4 t.c with a buttload of upgrades. even tho it has a 120 spring, it works like a dream. very very fast rof. i intend to upgrade my spring later down the road
i would recommend this otor to anyone looken for a cheap motor with good perfomance.

"Let me just start off by saying this motor rocks. It pulls my M120 spring back without a problem, but i would recommend a 9.6v battery to get a decent rate of fire with an M120. Yes this definately worth buying: its reliable, durable, strong and worth getting if you want your rate of fire back. A must buy!

"Works like a charm. Great increase of rof on my classic army M15. The only problem with this motor is its magnet strength will suck anything metal to your motor grip if it gets too close. Thats how powerful this motor is.