Angel Custom G2 SUS304 Stainless Steel Precision 6.01mm Airsoft AEG Tightbore Inner Barrel (Length: 363mm)

"I recently upgraded from my stock ~363mm barrel to this 510mm on my combat machine (with silencer attachment). From what I see so far, it was a steal. Groupings were tighter and distance increased. It was an easy upgrade and I recommend it.

"Got this for my A&K SVD works wonderfully and greatly increased its accuracy from an already accurate weapon!

Pros:
- Easy to install
- Good long barrel
- Excellent quality
- Amazing Accuracy

Cons:
- Sorta extends into the flash hider but barely noticeable not a con for me but maybe for others I'd imagine a 640mm would not show.

All in all very good TBB just wanted to post this so other people who may not know what is compatable for the A&K SVD. So yes this is compatable =)

"WOW!

I replaced my stock barrel with this and a Systema bucking and I can hit a 2 litre bottle 95% at 50',and that same bottle 76% at 75',and a man sized target at 90%' at 100'.

This barrel was placed in a Cybergun Sig Sauer 556 AEG.With these parts only,my FPS is consistently 380-395.I am using precision .20g BBs and I must caution you,I do get an occasional irregular BB,so pay attention when firing full auto.

"Will not fit KWA.
Added this to my VM4A1.
The nub window does not line up due to the Angel barrel having a window that is a tiny bit more forward than the proprietary KWA barrel. I didn't try installing a different non-KWA hop or nozzle, etc.
Seems like a great barrel. Wish it would have worked.

"im giving this a 4 star because it's not a direct drop in. the original bucking that came with my g17 did not fit this. i had to use a maple 70 degree bucking and even then it didn't keep a tight seal and got a drop in fps from 330 to 300. maybe i got two bad products? still it is literally a 6.01 inner barrel so-- 4 stars.

"This barrel increased my FPS by ~18-20. It did what I wanted it to and got me to 385 FPS with .20s. Knowing what I know now, I would buy a 6.03 barrel.

"I've used a couple of these for my GBBs and my VSR-10.

Great accuracy and inner polish, much better than JBU, Madbull, and Matrix. Much stronger too.

However, if you want to install an R-Hop, forget about it. Because of the 45 degree hop up window, it is very difficult to cut an R-hop nub to fit perfectly in the window without air leaks and uneven pressure. Therefore, you will be stuck with the basic bucking and nub system which is far less effective than an R-hop.

I only use these barrels in pistols now, just because I get the 6.01 diameter and durability. I prefer to use Prometheus barrels for snipers and rifles, as I can use an R-hop in these to achieve unbelievable accuracy and range. If you are a beginner or don't do a whole lot of tech work on your airsoft guns, this is a good choice. If you want more accuracy and range, go with a Prometheus and R-hop.

"I purchased this barrel over a year ago. I was using it in my Army L85. Though it did improve accuracy over the stock barrel, I wasn't really impressed with it. After installing the Matrix Advance blue bucking, I noticed that the V-teeth wouldn't center up properly. They would either shift to the right or the left, causing the bb's to veer to right or left. Once it was centered, it shot nice, but over time, still shifting. Growing tired of the left/right movement of the bb, I purchased a Lonex 509mm x 6.03 barrel. Upon comparing the two side by side, I noticed that the Angle Custom barrel had a MUCH larger nub window. That in turn, caused the buckings V teeth to move around, causing the bbs to do the same. The Lonex barrel had a very nice form fit window, allowing no movement of the V teeth, they sat in there perfectly. Needless to say, my accuracy with the Lonex barrel was very, very impressive. If purchasing online, I would recommend to compare the Angle barrel window with another barrels window, upon receiving it, just to make sure it isn't oversized. If purchasing in store, take another barrel with you to do the comparison, or ask for another barrel from the store clerk, to do the comparison. Good luck and happy airsofting!

"This barrel is terrible. I decided to be cheap instead of buy another Prometheus or PDI, and dropped this in my TM G36C. Even with Tokyo Marui, G&G, and HPA bb’s I was getting terrible results. Took the barrel out, dropped my STOCK TM barrel back in the gun, and I’m gettong far greater accuracy and range.

If you use cheap Chinese guns of course this seems like an improvement. If you use a high quality guns stick to high quality barrels. This is low priced because it’s low quality.

"Bad
well to start things off I have never received a straight barrel from evike everyone I've ever bought was bent

now with this angel custom I put it in with my mad bull hop up in my 450 FPS M16

my stock barrel was making it shoot at around 350 feet and I could hit a man sized target 2 out of 5 times

I put this barrel in and it refused to shoot more than 20 feet even with hop up all the way on I thought it had to of been my hop up so I put three different Hop ups in there I changed out my buckings my nubs and none of them shoot more than 50 feet so I put my stock barrel back in and got an amazing accuracy and range so this barrel was a waste of money and a huge let down I wouldn't buy it

"So I've owned this barrel for a while now. While it did give me a bump in FPS, my accuracy stayed about the same. The finish on the inside of the barrel is horrid, and the barrel window cuts are terrible. Because of this, I am unable to Rhop this barrel. I would not recommend this barrel to anyone. In turn, I would recommend shelling out a little more money and getting the Prometheus 363 6.03. The finish on the barrel matters more than inner diameter. And the Prometheus has a much better finish than this barrel. About the only thing nice thing this barrel had was the packaging. So my recommendation to you is to look elswhere for a tightbore. PDI and Prometheus are the best. Madbull, Retroarms, or ZCI if you're on a budget. Stay away from these angel custom barrels.