(626) 286-0360
Airsoft
Fishing
Air Gun
Krytac Full Metal Trident MKII CRB Airsoft AEG Rifle (Model: Foliage Green / 400 FPS)
101 Customer Reviews
by Kevin N. on 05/20/2016
"very good gun
good range
however, the receiver pin might not come off with the Allen key.
good range
however, the receiver pin might not come off with the Allen key.
by Eric W. on 03/21/2016
"Pros:
- GREAT ROF out of the box
- Nice internals
- Shoots at CQB (320) with .25s
- Full metal but pretty light (for me)
Cons:
- Does not come with an extra RIS rail (only reason I'm giving this a 4)
- Some mags are wobbly but still feed well
Notes:
-I would get a Prometheus or Modify 6.03 barrel and barrel extension with it if you're gonna play outdoors
-It may have a MOSFET but I use a 9.6 NIMH
-You should get it now
- GREAT ROF out of the box
- Nice internals
- Shoots at CQB (320) with .25s
- Full metal but pretty light (for me)
Cons:
- Does not come with an extra RIS rail (only reason I'm giving this a 4)
- Some mags are wobbly but still feed well
Notes:
-I would get a Prometheus or Modify 6.03 barrel and barrel extension with it if you're gonna play outdoors
-It may have a MOSFET but I use a 9.6 NIMH
-You should get it now
by Jennifer P. on 05/31/2015
"Pros:
light weight
extremely accurate
KEYMODS
looks 8/8
Cons:
none
light weight
extremely accurate
KEYMODS
looks 8/8
Cons:
none
by Dondra H. on 03/12/2015
"I got this gun a while back and It's pretty solid. The only problems I had with it is
1 - The barrel was installed upside-down so the hop-up didn't work this is an easy fix, but still made me a bit upset.
2 - This may not be a con for others but it is for me: when you release the bolt-catch the spring makes a really weird sound not too big of a problem.
3 - Doesn't come with rail segments.
Here are some problems my team mates had with theirs.
1 - The parts are propriety.
2 - The fire selector on the left side it too hard to pull back so you're better off just using your other hand.
Well, enough with the cons here are some of the many pros!
1 - I've ran an 11.1 Lipo with well over 10k rounds and 0 problems.
2 - Pretty light weight and feels solid.
3 - Built in MOSFET.
4 - The best AEG gear box, hands down.
5 - Stock can fit almost anything.
1 - The barrel was installed upside-down so the hop-up didn't work this is an easy fix, but still made me a bit upset.
2 - This may not be a con for others but it is for me: when you release the bolt-catch the spring makes a really weird sound not too big of a problem.
3 - Doesn't come with rail segments.
Here are some problems my team mates had with theirs.
1 - The parts are propriety.
2 - The fire selector on the left side it too hard to pull back so you're better off just using your other hand.
Well, enough with the cons here are some of the many pros!
1 - I've ran an 11.1 Lipo with well over 10k rounds and 0 problems.
2 - Pretty light weight and feels solid.
3 - Built in MOSFET.
4 - The best AEG gear box, hands down.
5 - Stock can fit almost anything.
by Richard H. on 03/06/2015
"I purchased the CRB and when it arrived I was very happy with the look and over all feel of it. I tested it with a 9.6 battery and thought the trigger response and ROF was great. The weight of it is very nice. It's not heavy and yet it feels solid and very capable. The finish is smooth and has a nice texture to it. The stock has a nice battery compartment and tue removeable tab is a nice touch to exterior mount a battery. I do like the hopup unit and the fact that its numbered and locks into place to keep it set. The hand guard is slim and I like the idea of not having a full rail to catch on your gear. I do wish it came with a couple of rails to add a flash light atleast without having to spend even more money right away.
My only real issue was that when I opened the box I noticed a ding on the hand guard with paint chipped off it. I called and emailed Krytac and Evike and was told by both of them that cosmetic damage on a brand new product was not covered. So I guess you can purchase a $325.00 item and they can just send you something that works but is scratched with paint missing and that's our problem. Funny how that works. So much for customer satisfation guaranteed!!
My only real issue was that when I opened the box I noticed a ding on the hand guard with paint chipped off it. I called and emailed Krytac and Evike and was told by both of them that cosmetic damage on a brand new product was not covered. So I guess you can purchase a $325.00 item and they can just send you something that works but is scratched with paint missing and that's our problem. Funny how that works. So much for customer satisfation guaranteed!!
by Jennifer P. on 02/21/2015
"Pros:
-reliable
-light weight
-full auto is VERY accurate
-accurate long rage
Cons
-Fuse blew within 2 times of using it
-Negative wire for battery fell out
-reliable
-light weight
-full auto is VERY accurate
-accurate long rage
Cons
-Fuse blew within 2 times of using it
-Negative wire for battery fell out
by Ryan w. on 10/15/2014
"AMAZING GUN!
Pros
Shoots very straight at a decent FPS.
Very comfortable to use with a well balanced low weight.
Battery Space that can hold 3 7.4 1000mah lipos and an 11.1 1000mah in the main cylinder.
Plenty of Rail Space
6 positions for the stock
ambidextrous friendly for shooting from both left and right corners
numbers on the hop up which are extremely helpful
integrated mosfet
Cons
Rail system will need keymod rail converters to add the usual attachments
Magwell can fail sometimes
Pros
Shoots very straight at a decent FPS.
Very comfortable to use with a well balanced low weight.
Battery Space that can hold 3 7.4 1000mah lipos and an 11.1 1000mah in the main cylinder.
Plenty of Rail Space
6 positions for the stock
ambidextrous friendly for shooting from both left and right corners
numbers on the hop up which are extremely helpful
integrated mosfet
Cons
Rail system will need keymod rail converters to add the usual attachments
Magwell can fail sometimes
by Eric G. on 08/15/2023
"The piston blew the back end on the second day of use. The same thing happened to a friend last year. Neither instance involved any abuse or modifications. Disappointing to say the least. I still rate the product fairly high as once a good piston was installed it worked great. It gets a threee as this should never happen.
by Nick V. on 11/13/2016
"I purchased this gun for a P* build and everyone always talks about how amazing quality krytac products are. When I first took it apart, the body pins were very hard to get out. When they finally came out i discovered they had rust on them! Brand new, off the shelf, top of the line gun had rusty pieces. Not a great start. When i try to take the motor grip off the cheap quality screws holding it on stripped! So i had to use a dremel to cut off most of the grip and cut off the heads of the screws so i could free the motor grip from the gearbox. Krytac spends so much money on rails, and internals, and a one piece upper reciever but then they cheap out on screws! If they had spent like $.03 more they would have saved me $20 and 2 weeks time on a new motor grip and $50 on a dremel. Rust on a brand new gun and easily stripped out screws... I expected better from Krytac.
by two c. on 09/12/2015
"As an avid airsofter for the last eight or nine years and a full grown man with a good paying job I have owned literally over four dozen guns. I must say I was in love with this as soon as I used it. Overall it's an extremely solid product, the externals are absolutely superb, and the only thing that has any wiggle to it is the stock which is to be expected with any collapsible or adjustable stock. After playing so long I'm not one to keep parts factory that bother me so rather than bore you with the details of what everybody is saying is amazing let me take you down the road of what I have experienced.
Cons.....
From the factory the stock motor is less than I had hoped for, when you take it out you can very easily spin the pinion gear with your fingers, there is very little resistance in the way of strong magnets. I performed my go to motor swap installing A matrix red high torque motor, which I highly recommend to anybody looking for a replacement for any motor.
The range was rather lackluster as well, with some guns including my KWAs there is a break in period, instead of really giving it a chance I cut and recrowned a 6.03 Madbull tight bore barrel to around 400 millimeters, and installed a 5 inch suppressor to hide the extra barrel length. Any suppressor with an external diameter of 30 millimeters or less will fit. I rhopped it as well but kept the factory hop up unit, which is extremely good.
While installing a 4/5 cylinder I was extremely shocked at how much fine metal dust was inside the gearbox. They were obviously shavings, however unable to find the source and with the gears and piston in good repair I simply cleaned and regreased it. Shim job was excellent from the factory.
When I changed the motor I changed to a new pistol grip, which isn't really a con except for the fact that krytac went the route of every other manufacturer using an a2 grip which I absolutely hate. Again personal preference. With such a standout weapon you would think they would be a little more creative, but again a valid choice
One of the things that bother me most about this rifle is the choice to make a very small component which goes between the bolt catch and bolt release which is very easily lost. I never even was aware it fell out of the gun and never found it after I lost the part. After checking on their forums and actually joining to ask the question it is called a Crowning BAR. Without it the bolt catch doesn't perform properly and when you pulled back the charging handle to expose the hop up you have to force it forward again, I have not yet replaced it as I need to go back into the gun again which brings us to our next point.
The factory MOSFET failed within probably 30,000 rounds. Basically making it so that I will have to go back into the gearbox again, the first time was because I wanted to perform upgrades this time it is to repair a factory part that failed far too quickly. I don't use ridiculous batteries, I use a standard 11.1 up to 20 C discharge which has never given me a problem in any other airsoft guns. As stated previously I have owned several dozen guns in the course of my career, it was the quickest MOSFET failure I have ever experienced.
Once again, except for these things it is an extremely solid gun. I am however a little disappointed that this highly engineered Ferrari of a weapon doesn't quite have the durability internally I would have hoped for. Overall it is a very very very good gun, but like anything else unless you are tech savvy don't expect a weapon to last more than 6 months in the airsoft industry without needing some kind of care maintenance and standard failing parts periodically.
I will however say that perhaps I simply got lemon, of the three Kwas I own one of them breaks consistently every time I take it even after I sent it back four times within the first 45 days of its life under factory warranty. The other two have been golden but sometimes you do get a lemon that has gremlins in it.
Cons.....
From the factory the stock motor is less than I had hoped for, when you take it out you can very easily spin the pinion gear with your fingers, there is very little resistance in the way of strong magnets. I performed my go to motor swap installing A matrix red high torque motor, which I highly recommend to anybody looking for a replacement for any motor.
The range was rather lackluster as well, with some guns including my KWAs there is a break in period, instead of really giving it a chance I cut and recrowned a 6.03 Madbull tight bore barrel to around 400 millimeters, and installed a 5 inch suppressor to hide the extra barrel length. Any suppressor with an external diameter of 30 millimeters or less will fit. I rhopped it as well but kept the factory hop up unit, which is extremely good.
While installing a 4/5 cylinder I was extremely shocked at how much fine metal dust was inside the gearbox. They were obviously shavings, however unable to find the source and with the gears and piston in good repair I simply cleaned and regreased it. Shim job was excellent from the factory.
When I changed the motor I changed to a new pistol grip, which isn't really a con except for the fact that krytac went the route of every other manufacturer using an a2 grip which I absolutely hate. Again personal preference. With such a standout weapon you would think they would be a little more creative, but again a valid choice
One of the things that bother me most about this rifle is the choice to make a very small component which goes between the bolt catch and bolt release which is very easily lost. I never even was aware it fell out of the gun and never found it after I lost the part. After checking on their forums and actually joining to ask the question it is called a Crowning BAR. Without it the bolt catch doesn't perform properly and when you pulled back the charging handle to expose the hop up you have to force it forward again, I have not yet replaced it as I need to go back into the gun again which brings us to our next point.
The factory MOSFET failed within probably 30,000 rounds. Basically making it so that I will have to go back into the gearbox again, the first time was because I wanted to perform upgrades this time it is to repair a factory part that failed far too quickly. I don't use ridiculous batteries, I use a standard 11.1 up to 20 C discharge which has never given me a problem in any other airsoft guns. As stated previously I have owned several dozen guns in the course of my career, it was the quickest MOSFET failure I have ever experienced.
Once again, except for these things it is an extremely solid gun. I am however a little disappointed that this highly engineered Ferrari of a weapon doesn't quite have the durability internally I would have hoped for. Overall it is a very very very good gun, but like anything else unless you are tech savvy don't expect a weapon to last more than 6 months in the airsoft industry without needing some kind of care maintenance and standard failing parts periodically.
I will however say that perhaps I simply got lemon, of the three Kwas I own one of them breaks consistently every time I take it even after I sent it back four times within the first 45 days of its life under factory warranty. The other two have been golden but sometimes you do get a lemon that has gremlins in it.
by John S. on 04/30/2015
"When I first ordered this gun I was so excited then... The gun came and I was disappointed. So I'll mix things up and start with the cons which there aren't many because I got it yesterday. Overall I am disappointed with the gun considering I got it yesterday and thetes problems alsothey messed up with what you would expect the be perfectly fine (dust cover) especially for this price. I feel bad giving this gun a 3 but they messed up and it is so annoying. Honestly I would have rather gotten a VFC.
Cons
- The dust cover just randomly falls down which my first M4 doesn't even do and it's clear! This thing is full metal and costs way more, I am very disappointed about that.
- The bolt release is so wobbly and I used it about 5 or 6 times
- I can see the gearbox from the outside, that doesn't really effect anything though but it's just ugly.
- I need a spring change for cqb, the FPS is akward its in between field and CQB.
- The bolt release sounds horrible and cheap. Again back to my clear M4... It sound better and its plastic but it doesn't effect the function of the gun.
- ambidextrous selector switch get in the way.
- People talk about this gun like a it's a god but don't get me wrong it's performance is amazing but it's the little things like this that make me feel disappointed.
Pros
- As you know it has an insane ROF I'd say about 20-25 RPS with and 11.1v 20c Lipo
- Full metal but very light
- Sling mount on both sides
- Built in Mosfet
- Great range with just .20 BBs
- Keymod just looks great and is the most customizable but can cost extra because of the rail segments
- hop-up is numbered
- Accuracy is great only had 2 shots curve to the right while shooting a 140rd mid cap on full auto with an 11.1v Lipo.
Cons
- The dust cover just randomly falls down which my first M4 doesn't even do and it's clear! This thing is full metal and costs way more, I am very disappointed about that.
- The bolt release is so wobbly and I used it about 5 or 6 times
- I can see the gearbox from the outside, that doesn't really effect anything though but it's just ugly.
- I need a spring change for cqb, the FPS is akward its in between field and CQB.
- The bolt release sounds horrible and cheap. Again back to my clear M4... It sound better and its plastic but it doesn't effect the function of the gun.
- ambidextrous selector switch get in the way.
- People talk about this gun like a it's a god but don't get me wrong it's performance is amazing but it's the little things like this that make me feel disappointed.
Pros
- As you know it has an insane ROF I'd say about 20-25 RPS with and 11.1v 20c Lipo
- Full metal but very light
- Sling mount on both sides
- Built in Mosfet
- Great range with just .20 BBs
- Keymod just looks great and is the most customizable but can cost extra because of the rail segments
- hop-up is numbered
- Accuracy is great only had 2 shots curve to the right while shooting a 140rd mid cap on full auto with an 11.1v Lipo.