Features 7 Modes to choose from: safe, semi-auto, binary, burst, Aug, full-auto and sniper Allows pre-cocking for better and faster trigger response Real magazine simulation. After 30 rounds are spent the magazine would need to be reinsterted Adjustable ROF Over-discharge and low battery protection Active breaking and cycle detection protects your gears and gearbox Remote firmware updates through the Eshooter App Smart fuse protects battery ,motor, and controller from overheating, overload and short circuits Sleep charge after an hour preventing unnecessary battery discharge Locked rotor protection will alert the user if the gears and motor aren't functioning correctly Sensor Calibration to ensure maximum preformance Kestrel V2 ETU is compatible with the standard Tokyo Marui V2 gearbox. It can make your AEG much smarter, more reliable and have a faster response. You can customize AEG's shooting parameters by connecting the "Eshooter" App to experience a different shooting experience
Trigger Sensitivity Adjustment: There are 5 sensors to detect the trigger™s movement to control the trigger™s sensitivity. Without disassembling your gun you can connect to the Eshooter App wirelessly.
Selector Modes: 2 selectors allow your game to use various selector modes, including:
Safe Mode can prevent your gun from firing no matter where the selector is.Semi Mode allows you one shot one round.Binary Mode allows you to pull the trigger to fire one shot and release it to fire again.Burst Mode allows you to preset the number of BBs fired.Aug Mode allows you to pull trigger slightly ( it depends on your trigger. sensitivity setting) for one shot ,then continually pull to change to AUTO mode.Auto Mode allows you to shoot continuously until the trigger is releasedSniper Mode can be used with sniper delay function, simulate 2 stage safety and recoilPre-Cocking: Pre-Cocking can simulate a real gun™s trigger reaction. It allows the spring to pre-compression to speed up the trigger reaction. You can adjust Pre-Cocking data before starting. Pre-Cocking can be used in all modes mentioned above.
Real Magazine: Simulate a real magazine with 30 rounds to enhance the real gameplay experience. After firing 30 rounds the magazine must be reloaded.
ROF Control: allows you to adjust AEG shooting speed to get your preferred ROF.
Battery Protection: LiPo and LiFe batteries are very sensitive to over-discharging. In order to prevent damaged from over-discharge, the microprocessor monitor will prevent firing when the voltage drops to a critical level.
Low Battery Warning: When the voltage drops to a critical level, the App will send out a low battery notification and the AEG will not fire.
Active Brake: The adaptive active brake function can avoid gear instability, ensuring the piston stops in the front position to decrease unnecessary stress and increase the gearbox and internal parts life.
Cycle Detection: Kestrel V2 can detect where the cycle should finish with the gear sensor function which can count every tooth on gears. Therefore, you can choose DSG(9:1), SSG(13:1) and standard gear(18:1).
Firmware Updates: You can remotely update the firmware using the Eshooter App which supports free OTA service.
Smart Fuse: Kestrel V2 is designed with 2 fuses, mini smart fuse and auto-fuse which support a maximum of 25A. They can protect the battery, motor and controller even if the battery is connected wrong. It can also protect the MOSFET from overheating, overload and short circuiting preventing the motor and battery from damage if your rifle is jammed.
Sleep Mode ETU will go to sleep mode if your gun is idle for an hour which prevents the battery from discharging.
Locked Rotor Protection: Automatically locked rotor protection. Kestrel V2 provides active protection and reminds users to check the gearbox to prevent damage from gears and motor not properly functioning together or over current.
Sensor Calibration: Kestrel V2 provides sensor calibration function to ensure your ETU sensors keep the best performance and provide you a more accurate shooting experience.
Manufacturer: Eshooter
Specifications: Dimensions (mm): 47.4 x 28.7 x 13.5
Voltage Range: 3.75V - 17V
Current Consumption: 17mA
Temperature Range: -15 + 50 degrees Calvin
Relative Humidity: ≤80%
Compatibility: Fits Tokyo Marui Spec Version 2 Airsoft AEG gearboxes
Package Includes: MOSFET Kit, 2x 0.2mm Shims, 8x 0.3mm Shims, 8x 0.5mm Shims, 2x Plum Blossom Metal Gasket, 2x M2x4 Screws, 1x Deans Connector, 2x Heat Shrink Tubes, 2x Double-Sided Tape, 2x 2.6*14 Screws, 1x Magazine Button Base, 1x 30A Fuse, Manual
Disclaimer: Professional installation highly recommended. Please use discretion when installing custom parts as fit and compatibility may vary. Modification may be required. Professional installation recommended.
About Eshooter Technology Eshooter is devoted to research and development in the Airsoft industry. Driven by the spirit of innovation and creative new technology, Eshooter is focused on exploring new solutions to meet Airsoft enthusiasts' needs.
(Write a review)
" Solid ETU. Similar essential features of the Gate Titan 2 and Jefftron Leviathan but without the excess and complications, and at a reasonable price. Slowly becoming one of my favorite ETUs. I enjoy how it reads/asks the exact Gearset in order to calibrate correctly without any issues, something Gate and Jefftron haven't done yet. This ETU enhances reliability a ton as well.
" I purchased this mosfet for my cyma sr25, in case you are wondering, yes, it does fit 2.5 gearboxes. this was the first mosfet ive ever installed and it was pretty easy, the instructions were well written and made the whole process take less than an hour to install and troubleshoot. one major advantage to this over many other mosfets is the bluetooth is built in, no dongle or extra purchases, the app isnt half bad either. the only modification I had to do the mosfet was the magazine detector, in the cyma sr25 it sits too far forward and prevents the mag from being inserted, all you need to do to fix this is shave a bit off the back of the unit (which is plastic and wont damage anything important) and then sit it back as far as you can, if done right, the mags will have ample room, and even sit in the magwell a bit better due to the mag sensor putting a mild pressure on the mags. overall, this is a pretty good mosfet, and for the extra 10 dollars id say its better than the perun v2
" I installed two of these mosfets in customer's guns and I've had nothing but positive feedback. The best thing about them is that they have Bluetooth built in, so there is no need for an adapter.
Write a Review Evike.com Online Store In Stock
2801 W. Mission Rd., Alhambra, CA 91803
In Stock
1400 W. 4th St. #2, Antioch, CA 94509
(925) 237-2560
In Stock limited quantity
13742 N. Eldridge Pkwy., Cypress, TX 77429
(281) 547-8367
In Stock limited quantity
319 West Holt Ave., Ontario, CA 91762
(909) 395-0056
In Stock limited quantity
4265 Trade Center Dr. Ste. 100, Grapevine, TX 76051
(469) 425-5888
In Stock limited quantity
2893 N. Green Valley Pkwy., Henderson, NV 89014
(702) 433-4716
In Stock limited quantity
(626) 286-0360
Airsoft
Fishing
Air Gun
