EMG Helios Knights Armament Corporation Delta PDW Airsoft AEG Rifle w/ Microswitch Trigger & MOSFET (Color: Black / Picatinny / 350 FPS)
4 Customer Reviews
by Ace S. on 11/22/2024
"I havent had the gun long (Maybe a couple months). Shot it for the first time today. Its very nice and well worth the price. The only problem i have noticed is the QD sling point mounts. I purchased a G&P QD point and it does not work. I looked at the mounts and they dont look like they would actually work. The one on the receiver is very shallow and wont fit a QD point all the way. The one on the stock is a through hole but it doesnt have any sections for the QD mount to latch. The other problem i had was the extended barrel it came with. Removing the short barel was a pain but once it was off, the longer barrel did not fit. I had to sand it down quite a bit to get it in and it was a very tight fit. Its like a millimeter to big. My only other issue was the wiring. Its not a major problem and may be good to others, but the wire is very long and has a fuse. I wrapped the wire behind my grip and around to the other side of the gun and there is still slack.
Pros:
Very Accurate
Good rate of fire (Using 7.4 2000 mah Battery)
Lightweight (Without attachments)
Skeleton stock functions very well
Ambidextrous
Cons:
Long Barrel was too big (Diameter)
QD points dont work like they are supposed to (May have the wrong mount)
Has a fuse
Wiring is very long (Could be a good thing for some)
Pros:
Very Accurate
Good rate of fire (Using 7.4 2000 mah Battery)
Lightweight (Without attachments)
Skeleton stock functions very well
Ambidextrous
Cons:
Long Barrel was too big (Diameter)
QD points dont work like they are supposed to (May have the wrong mount)
Has a fuse
Wiring is very long (Could be a good thing for some)
by Quinn K. on 03/11/2024
"very nice PDW. I've had the keymod version for about a year and its fantastic. it runs absurdly fast on an 11.1, so unless your mags can keep up with like 28 rps, use a 7.4, its much more manageable.
The gun is small, keep this in mind, the stock fold out and is a bit small for me, Im 6ft for reference, but its nothing too bad. youll just have to get down on the gun more for a proper cheekweld if youre using irons.
the build quality is very nice. it shoots good, feeds good, the build quality is very nice, the stock isnt wobbly like most folding stock guns are, its very solid and doesnt feel like it can break if you throw the gun around a little. gearbox runs like a champ so far, i havent opened it up, since it hasnt given me the need, so i do not know whats inside.
Overall, if youre a smaller dude looking for something just a bit more different than the sea of copycat M4s, or if youre like me and need a small but punchy sidearm for a SAW or long gun, this thing is it. absolutely fantastic.
The gun is small, keep this in mind, the stock fold out and is a bit small for me, Im 6ft for reference, but its nothing too bad. youll just have to get down on the gun more for a proper cheekweld if youre using irons.
the build quality is very nice. it shoots good, feeds good, the build quality is very nice, the stock isnt wobbly like most folding stock guns are, its very solid and doesnt feel like it can break if you throw the gun around a little. gearbox runs like a champ so far, i havent opened it up, since it hasnt given me the need, so i do not know whats inside.
Overall, if youre a smaller dude looking for something just a bit more different than the sea of copycat M4s, or if youre like me and need a small but punchy sidearm for a SAW or long gun, this thing is it. absolutely fantastic.
by Scott B. on 09/17/2024
"I purchased this rife on October 13, 2023. It now September 17, 2024. So I've almost had it for a year now.
First thing, I'll say about it is the rifle, its very accurate for the size. Seating, the mag sometimes can be an issue, like the mag catch engaging on holding the mag. For bb's, I use .23, I believe
using .20 to .28 will work. The threading for the outer barrel is negative (CCW). The flashhider is metal. I like that aspect of the rifle. The bolts that hold the skeletonized stock can come loose and fall out. Which happened to me. There are no parts that I could find for repair. probably could ask the EMG for the part. Rifle is made for single select fire, can use full auto but limite the usage as the motor can over heats. The amberdictorists fire selective is kind of loose, and for a left hander, can be annoying as the the fire switch can switch from single to full auto.
Parts wise, there's not that many to find for the external. Internal parts, the only issue I have found is finding tightbore barrel the same length as the original barrel, but gun comes with extension barrel for the rifle. If you want to get longer inner barrel.
Overall, I would recommend this rifle to anyone. I use it as my main for the games I play.
First thing, I'll say about it is the rifle, its very accurate for the size. Seating, the mag sometimes can be an issue, like the mag catch engaging on holding the mag. For bb's, I use .23, I believe
using .20 to .28 will work. The threading for the outer barrel is negative (CCW). The flashhider is metal. I like that aspect of the rifle. The bolts that hold the skeletonized stock can come loose and fall out. Which happened to me. There are no parts that I could find for repair. probably could ask the EMG for the part. Rifle is made for single select fire, can use full auto but limite the usage as the motor can over heats. The amberdictorists fire selective is kind of loose, and for a left hander, can be annoying as the the fire switch can switch from single to full auto.
Parts wise, there's not that many to find for the external. Internal parts, the only issue I have found is finding tightbore barrel the same length as the original barrel, but gun comes with extension barrel for the rifle. If you want to get longer inner barrel.
Overall, I would recommend this rifle to anyone. I use it as my main for the games I play.
by Spencer R. on 06/25/2024
"I like this gun so far. Feels good, Sturdy, Compact, Different. They only issue is the site is wrong about the threads. They are 14 Neg not 14 Pos. I bought a Angel Custom HIVE Airsoft Suppressor in 14 pos and it will not screw on. I tried my flash hider from the VFC M416 which is 14 neg and it went on with no issue. Tomorrow I will contact Evike support to tell them of the issue and get my suppressor which out.
I will do a better performance review when I can test it out fully.
I will do a better performance review when I can test it out fully.