ID: 116507 (Stock-SI-FSA-DUAL-STAB)
SI-FSA-DUAL-STAB
Hover or touch above to zoom
Guns and other accessories not included
$187.95
MAP ProtectedExempt From Coupons
Non-Export ItemShips Inside USA Only
Free ShippingNo Coupon Required
Features
- Preassembled as a stabilizer
- Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
- Folds left or right anytime without flipping or reconfiguring hinge
- Positive lock in the folded position, included rubber pads for folding adapter indentation to adjust desired locking tension when fully deployed
- Pull up on bar near hinge and back for quick deployment when folded
- 3-degree down tilt to help prevent interference with ejection port when folded to right side
- Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
- Single rear QD sling mount
- Steel hinge with 6061-T6 Aluminum base, adapter and strut
The Strike Dual Folding Adapter is the first-in-market patented system that has an intuitive unfolding system for a Picatinny interface. The Strike Dual Folding Adapter folds left or right anytime without flipping or reconfiguring the hinge. At any moment, the user can fold to the desired left or right side. When moved into the folded position, there is a positive lock so the Strike Dual Folding Adapter remains folded. A simple pull up on the bar near the hinge and back for quick deployment when folded. A 3-degree down tilt angle is added to help prevent interference with the weapons ejection port when folded to the right side. The Strike Dual Folding Adapter mounts directly to a 1913 Picatinny interface with two (x2) built-in locking lugs for a secure attachment. A single QD point is located on the rear of the stabilizer. The Strike Dual Folding Adapter is constructed with a steel hinge and 6061-T6 Aluminum base, adapter & strut. Get a unique modular system with interchangeable (sold separately) parts like optional cheek riser (to be only used legally with stock setup), strut lengths and other accessories. Use with almost any 1913 Picatinny rear end like the Strike AR Picatinny Stock Adapter or many factory OEM weapons with a Picatinny rail section in place of the traditional AR buffer tube threads. The Strike Dual Folding Adapter is a one of a kind adapter that gives you more options than anything on the market for those who want a truly modular folder that is under 10 ounces.
Manufacturer: Strike Industries
Specifications:
Fully Assembled w/ Stabilizer Specifications:Length: 240.50mm (9.44")
Width: 53.05mm (2.09")
Height: 141.95mm (5.59")
Weight: 272.15g / 9.60oz
Mount Compatibility:1913 PicatinnyStrike AR Picatinny Stock AdapterB&T APC9/45, APC223/300, GHMBrownells BRN-180 lower receiverCZ Bren 2CZ Scorpion EVO pistol w/ SI Stock Adapter Back PlateGalil ACERuger PC ChargerSIG SAUER MCX/MPX...and other compatible riflesDisclaimer:Always check with your state and local laws.Stabilizer was designed and intended for use as a stabilizing accessory for one-handed firing along with rear QD sling attachment point for one-handed sling tension firing for stability.Stock was designed and intended for use with a rifle setup or registered Short-Barrel Rifle (SBR) setup.Note:Pressing buttons simultaneously will remove bar from hingeLubrication of hinge and button components needed for routine maintenanceDisclaimer:Dirt and/or sand can hinder folding hinge proper operationNot recommended for use while mortaring firearm to clear malfunctionsExpect wear and tear on folding locking mechanism from long term useBe careful, avoid fingers from getting caught during folding and unfolding processWarning:Not recommended for use while mortaring firearm to clear malfunctionsBefore every use, always check proper function of your QD mount and/or sling loop and any wear and tear from useAlways have your weapon in the SAFE position when not being firedAlways follow all firearms safety rules and never point your weapon at anything you are not willing to destroyAbout Strike Industries
Strike Industries, always innovating and providing the best quality firearms accessories at the best prices since 2010.
Fully Assembled w/ Stabilizer Specifications:
Length: 240.50mm (9.44")
Width: 53.05mm (2.09")
Height: 141.95mm (5.59")
Weight: 272.15g / 9.60oz
Mount Compatibility:
1913 PicatinnyStrike AR Picatinny Stock AdapterB&T APC9/45, APC223/300, GHMBrownells BRN-180 lower receiverCZ Bren 2CZ Scorpion EVO pistol w/ SI Stock Adapter Back PlateGalil ACERuger PC ChargerSIG SAUER MCX/MPX...and other compatible rifles
Evike.com Online Store
In Stock
2801 W. Mission Rd., Alhambra, CA 91803
In Stock
Discuss about Strike Industries Dual Folding Stock Adapter for Picatinny Rail Mounts (Model: Stabilizer) with your friends and fellow Evike.com shoppers!
Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!
Warning: California's Proposition 65
Proposition 65 Warning for California Consumers
Warning: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov