RMA Armament Level III+ 1092 Armor Plate Multi Curve (Model: SAPI Cut 9.5" x 12.5" / Medium)

Features

• Ceramic Dyneema® UHMWPE plate with 600 denier water resistant cover
• Stand alone armor
• Full edge-to-edge protection on its strikeface
• NIJ 0101.07 RF2 tested
• Free incident replacement (If the armor saved your life, please let the manufacturer know!)
• Made in Centerville, IA USA
• 5 Year manufacturer's warranty

RMA has upgraded its popular Level 3+ body armor plate to create an all new Generation 2 version. Generation 2 defeats multiple M855A1 rounds with ease, yet remains lightweight and affordable. Plus, it has a thinner profile than Generation 1. Not only is it multi-hit rated to defeat the M855A1 round, but it's also been tested to the upcoming NIJ .07 RF2 standard. This is without a doubt, the new standard in the Level III+ body armor protection. But what else would you expect from RMA?

RMA's Level 3+ body armor plates (models #1091-1094 Gen2) have a ceramic body armor strikeface and Dyneema® UHMWPE build. We specifically tested Generation 2 to meet the new NIJ 0101.07 standards set forth by the National Institute of Justice. With RMA's Level III+ plates, there's no confusion to what Level III+ (RF2) ceramic body armor should be. After all, the standard for Level III+ plates (RF2) is the ability to defeat the M855 green tip, XM193, 7.62—39 MSC and the M80 Steel Jacketed NATO round. This body armor plate does that with flying colors. But we've taken it further with its ability to defeat the M855A1.

If you're looking for a lightweight ceramic body armor plate that is affordable in price, yet sets the standards in ballistic performance, this plate is for you.

What is RF2 (Level III+)?
The upcoming standard set forth from the National Institute of Justice (NIJ) will implement a new ballistic rating system for hard and soft armor. When the new standards for armor are officially released, RF1 (Level III), RF2 (Level III+) and RF3 (Level IV) will be the hard armor names to replace the current ratings of Level III, Level IV, etc. (Level III+ was never an official compliance standard, previously).

But the differences in the ratings go far beyond the nomenclature. Under the current level III standard, a plate must defeat 6 rounds of M80 Steel while also boasting a back face deformation of less than 44mm. Because of that, many companies would rate their armor plates as Level III+ simply because it defeated what they personally deemed was a more threatening round than a M80 NATO Steel projectile. Many companies would say their plate could defeat a single round of M193, 7.62—39 MSC or M855 green tip and boast that their plate was a Level III+ or Level III++ despite the fact that their plates haven't even been tested to defeat six (6) M80 NATO projectiles the level III minimum requirement.

NIJ 0101.07 Draft Standard for RF2
However, under the new standard, RF1 plates (previously Level III) must now defeat three (3) M80 NATO Steel rounds, three (3) 7.62 x 39 MSC AND three (3) M193 BT to earn its rating. If a plate cannot defeat those rounds while also boasting a BFD of less than 44mm, they will not even be considered for the RF2 rating (previously Level III+). So you MUST pass RF1 to have a chance to become an RF2 plate. Once the plate passes the RF1 testing, more plates must be submitted for further testing, which will also include defeating three (3) rounds of M855 green tip as well.

At RMA, we have created this next generation plate that has not only passed RF1 and RF2 testing, but additionally defeats the M855A1 round. Here is the official RF1 and RF2 testing report for this plate. Going forward, a company will have to prove that they can defeat all of those rounds. And RMA is the first company to do so.

Manufacturer: RMA Armament

Specifications:

Size: 9.5"x12.5" / 241.3mm x 317.5mm
Weight: 5.6lb / 2540.12g
Armor Shape: Multi-Curve
Armor Cut: SAPI/ESAPI Cut (Shooter's Cut)
Thickness: 1"
Material: Alumina Oxide Ceramic and Polyethylene Composite
Armor Rating: Level III+


*Fit and appropriate use is solely up to the discretion of the user. Body armor is legal to own in all 50 states (but we cannot ship it to the state of Connecticut).
*It is the responsibility of the buyer to ascertain whether or not they are legally able to purchase and use body armor in their city and or state. The seller assumes no responsibility for the actions of the buyer.
*NO ARMOR IS BULLET PROOF! Different armor models are meant to protect against specific types of ammunition. No body armor will stop every threat. Units should select armor designed to protect against the threats most likely to be faced by their team. At a minimum, armor should be selected that will protect against handguns.

*DUE TO THE LIFE-SAVING NATURE OF THIS PRODUCT, ALL SALES ARE FINAL*

About RMA Armament

RMA (which stands for the company founder's daughters Renee, Meghan, and Alexis) was founded by Blake Waldrop, a US Marine (2001-2005) and a sworn police officer (2007-2013). Blake knows what it's like to wear body armor and put your life into a product's hands and it's his mission to design and produce the highest quality armor at the most affordable prices.