E-Shooter Technology Kestrel V2 ETU Basic MOSFET for Version 2 AEG Gearboxes (Model: Rear Wired)

Features

• Easy Programming: Only 3 steps to finished your wanted setting, reset all functions with 8 seconds trigger hold.
• Support Brushless Motor: Support brushless and high-speed/high-torque motors.
• Gel BBs Pre-load: Optional gel blaster motor feeding function which can be from 0.5 to 3 seconds when battery connected.
• Long Lasting Shooting: Perfectly working even over 50k shots.
• Active Braking: Adaptive function to avoid gear instability, ensure piston stops in front position, increase gearbox and inside parts' service life.
• Locked Rotor Protection: Active protection when gear and motor work out of order prevents gearbox damage.
• Low Battery Protection: When the battery is low, motor vibrates 5 times and blue light flashes 5 times at the same time.
• Low/High Voltage Protection: It can self-judge the number of lithium battery cells. 2-cell battery supports a minimum of 6V, and 3-cell battery supports a minimum of 8.5V. Maximum support 17V.
• Strong compatibility: Supports most V2-type gearboxes on the market.
• Pre-cocking Adjustment: Different 5 pre-cocking levels to programming. The KESTREL Basic have learning function which can automatically determine the position of pre-cocking stop based on different speeds and loads. It is normal for a single shot to fire a few more rounds after replug or unplug the battery.

Kestrel V2 BASIC is a low-budget option that allows you to upgrade your AEG with reliable ETU. Set your wanted pre-cocking level, different SEMI & AUTO functions with simple programming steps.

Manufacturer: Eshooter

Specifications:

Dimensions (mm): 47.4 x 28.7 x 13.5
Voltage Range: 3.75V - 17V
Current Consumption: 17mA
Temperature Range: -15 + 50 degrees Calvin
Relative Humidity: ≤80%
Compatibility: Fits Tokyo Marui Spec Version 2 Airsoft AEG gearboxes
Package Includes: MOSFET Kit, 2x 0.2mm Shims, 8x 0.3mm Shims, 8x 0.5mm Shims, 2x Plum Blossom Metal Gasket, 2x M2x4 Screws, 1x Deans Connector, 2x Heat Shrink Tubes, 2x Double-Sided Tape, 2x 2.6*14 Screws, 1x Magazine Button Base, 1x 30A Fuse, Manual

Disclaimer: Professional installation highly recommended. Please use discretion when installing custom parts as fit and compatibility may vary. Modification may be required. Professional installation recommended.

About Eshooter Technology

Eshooter is devoted to research and development in the Airsoft industry. Driven by the spirit of innovation and creative new technology, Eshooter is focused on exploring new solutions to meet Airsoft enthusiasts' needs.