Spartan Armor Systems AR550 Level III+ Steel Core Body Armor Plate (Model: Shooters Cut - Single Curve w/ Full Coat / 11x14 / Set of Two)

Features

• The highest quality of AR550 steel is used to manufacture our armor sets
• NIJ 0101.06 level III certified to stop common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less
• Core Brinnell Hardness (BHN) between 545-560
• Full coat fragmentation / spalling mitigation treatment
• Curved, shooters cut for improved comfort and increased range of movement
• Made in the USA

Our AR550 level III+ body armor offers advanced rifle rated threat protection and is manufactured to the highest quality standards. Our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications.

Weve taken our Level III Body Armor to a NEW level! Spartan Armor Systems is pleased to introduce our AR550 Body Armor! With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! Were special rifle threat validated!

Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.

Our AR550 armor hits the sweet spot in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.

Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel perfectly hits the sweet spot. Its much harder than AR500, but not too hard to cause severe stress while forming.

Our AR550 Spartan Body Armor now has the option of Advanced Triple Curve (ATC). An industry FIRST! Spartan Armor Systems is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, weve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, weve successfully defeated these threat profiles from Close Quarters Battle (CQB) distancesrepeatedly!

Chest Plate Weight (per plate):

8x10 AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz.
10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz.
11x14 AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs.

Side Plate Weight (per plate): 66 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 68 approximately 3lbs 6 oz (base coat), 3lbs 12oz (full coat).

Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness

Please see our FAQ for weight specifications and other questions you may have.

As with all of our AR550 Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our FAQ to find out more about the AR550 Armor we use to construct our body armor!

Manufacturer: Spartan Armor Systems

Specifications:

Material: AR550 Steel
Weight: 11lbs (per plate)
Thickness: .25" AR550 Plate + .25" Coating for Approximately .5" - .6" Overall Thickness

*Fit and appropriate use is solely up to the discretion of the user. Body armor is legal to own in all 50 states (but we can not ship it to the state of Connecticut).
*It is the responsibility of the buyer to ascertain whether or not they are legally able to purchase and use body armor in their city and or state. The seller assumes no responsibility for the actions of the buyer.
*NO ARMOR IS BULLET PROOF! Different armor models are meant to protect against specific types of ammunition. No body armor will stop every threat. Units should select armor designed to protect against the threats most likely to be faced by their team. At a minimum, armor should be selected that will protect against handguns.

Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:

Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.

The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.

About Spartan Armor Systems

Since 2012, Spartan Armor Systems™ has been a leader in high quality ballistic body armor and tactical gear. Our mission is to provide First Responders and Citizens with the affordable and reliable body armor that they deserve. We offer a wide selection of body armor, plate carriers, steel targets, and med kits at very competitive prices. Spartan Armor Systems™ specializes in NIJ 0101.06 Certified & Compliant body armor, offering Level IIIA, Level III, Level III+ and Level IV threat protection. We are best known for our Spartan AR550, AR500 Omega and AR650 Armaply™ steel core body armor with our proprietary Encapsaloc™ fragmentation mitigation coating.