Pre-Order ETA April 2025 Angel Custom 2000 Round "BLOK" Thunderstorm Airsoft AEG Drum Flashmag (Color: Black / M14 Adapter)
12 Customer Reviews
by James N. on 07/12/2022
"So far so good only used once for a game. Fits AVF Avalon with no issues.
by Liam B. on 03/18/2022
"BRRRRRRRRRRRRRRRRRRRRRRRT, the ak adaptor will not fit E&L ak without filing both feed lip AND the little grooves near mag release paddle, the m4 adaptor fit my VFC and I had no misfeeds, battery lasted multiple days, button is convenient. Only complaint is that the button is a little easy to accidently press while firing prone
by Alice G. on 11/27/2021
"Concerning the Evo Scorpion A1 from ASG:
This mag works very well. I’ve had a couple jams, but they were easily fixed Easy to fill, compatible for many guns!
My only complaint and it’s a gun specific one, is the stock compatibility with this particular magazine. I cannot fold the stock on an Evo Scorpion with this mag in. It is simply too big. If I extend the stock all the way out, it does kind of pry itself against the mag and holds in place somewhat, but this can’t be good for the frame.
Still worth the firepower!
This mag works very well. I’ve had a couple jams, but they were easily fixed Easy to fill, compatible for many guns!
My only complaint and it’s a gun specific one, is the stock compatibility with this particular magazine. I cannot fold the stock on an Evo Scorpion with this mag in. It is simply too big. If I extend the stock all the way out, it does kind of pry itself against the mag and holds in place somewhat, but this can’t be good for the frame.
Still worth the firepower!
by Robert L. on 06/08/2021
"Good mag. Battery lasts awhile. No issues with feeding.
by Cameron B. on 05/22/2021
"Bought two of these for my m4. i usually went though 6 hi caps per game because i have a happy trigger finger and was always reloading. One of these lasts me an entire game and then some. There is a ton of bbs in the feeding tube? i guess it might be called and the button is easy to depress, even with gloves on. Overall totally worth the price, 10/10 would buy again
by Gavin D. on 10/26/2020
"This drum performed amazingly when I fielded it recently it was definitely worth the purchase. The only con that comes with this thing is finding a cqb field that let's you use it.
by Gavin D. on 10/23/2020
"This mag is amazing used it a whole night with no feeding issues and no battery replacement. There is a slight wiggle in the magwell but it was no issue.
Pros
Never have to reload
Light weight
Quiet and fast motor for feeding to your gun
No feeding issues
Very high quality construction
Cons
A very slight wiggle in the magwell (not a big problem)
Pros
Never have to reload
Light weight
Quiet and fast motor for feeding to your gun
No feeding issues
Very high quality construction
Cons
A very slight wiggle in the magwell (not a big problem)
by Evan J. on 08/05/2020
"Really nice magazine, although it's expensive you get what you pay for. Works and looks amazing on my Krytac Vector. The block shape matches the look of the Vector so well, it really ties the AEG together. The build construction of the magazine is great, it's pretty light, it looks really cool, I can stand my Vector up while it's in, and it holds an insane amount of ammo! The magazine adapters also work really well and look cool. The battery compartment is easily accessible and protected. The only minor thing I noticed about the magazine is that it has a very slight wobble while loaded in the AEG. It's barely noticeable, but it is there. Thanks so much for a great product!
by Brice P. on 12/28/2021
"Got 2 of these.
Pros:
They feed about 100-120 Bbs on a full wind. You need to wind past when it starts making the clicking noise to get a full wind.
The electronic winding is relatively fast.
I find loading the mag to be easy and for the weight 2000 bbs beats a tac vests
Modular fittings for different guns is awesome.
1 battery winds for a long time.
Cons:
One magazine broke after about 5 days of play approximately 10k rounds BUT evike replaced it even slightly passed the warranty date!!!
Pros:
They feed about 100-120 Bbs on a full wind. You need to wind past when it starts making the clicking noise to get a full wind.
The electronic winding is relatively fast.
I find loading the mag to be easy and for the weight 2000 bbs beats a tac vests
Modular fittings for different guns is awesome.
1 battery winds for a long time.
Cons:
One magazine broke after about 5 days of play approximately 10k rounds BUT evike replaced it even slightly passed the warranty date!!!
by Jon O. on 02/13/2022
"1 STAR for usability out of the box.
5 STARS for being a DIY project.
Feed switch was dead after a few presses. Didn't get to use it right away.
I planned on tearing it open to install a remote pressure switch anyway. For anyone looking for an easy drum mag to mod, this is it. A ton of dead space inside (bottom half internally is the feed mechanism area, and is 75% dead space). And the battery cover area also has room for stuff. You could theoretically install a DIY auto feed detection circuit with an Arduino and photo diodes for under $15-20 easy.
Electronics are simple; battery, switch, continuous rotation servo. I haven't opened up the servo (no markings) to check for resistors, but I'm assuming it's a 9vdc servo by itself (analog). The mounts are standard for hobby servos, and could be upgraded to feed faster if you wanted to play with that.
It's definitely got room for a smaller battery pack if you're needing power storage. Plastic is a nice rugged polymer, but can be drilled into or carved with an x-acto knife really easily.
Does hold 2000 BBs, but it will take a minute of shaking, pour some more, shake shake, pour some more.
Since this is a multi-gun setup, expect to be shipped the drum by itself as one line item, and the adapter listed separately. I got the M4 adapter, and it has (2) 2.5mm hex screws to attach it with (does not come with an Allen key). If you're opening it up, you'll need a 3mm hex, externality, but everything inside is Phillips.
5 STARS for being a DIY project.
Feed switch was dead after a few presses. Didn't get to use it right away.
I planned on tearing it open to install a remote pressure switch anyway. For anyone looking for an easy drum mag to mod, this is it. A ton of dead space inside (bottom half internally is the feed mechanism area, and is 75% dead space). And the battery cover area also has room for stuff. You could theoretically install a DIY auto feed detection circuit with an Arduino and photo diodes for under $15-20 easy.
Electronics are simple; battery, switch, continuous rotation servo. I haven't opened up the servo (no markings) to check for resistors, but I'm assuming it's a 9vdc servo by itself (analog). The mounts are standard for hobby servos, and could be upgraded to feed faster if you wanted to play with that.
It's definitely got room for a smaller battery pack if you're needing power storage. Plastic is a nice rugged polymer, but can be drilled into or carved with an x-acto knife really easily.
Does hold 2000 BBs, but it will take a minute of shaking, pour some more, shake shake, pour some more.
Since this is a multi-gun setup, expect to be shipped the drum by itself as one line item, and the adapter listed separately. I got the M4 adapter, and it has (2) 2.5mm hex screws to attach it with (does not come with an Allen key). If you're opening it up, you'll need a 3mm hex, externality, but everything inside is Phillips.
by Dalton M. on 04/09/2021
"I've tried to use this magazine on many occasions, however, it was one flaw that is infuriating beyond belief. The button on the bottom of the mag to wind the mag has a very tiny window in which it actually works. If you depress the button about 1/4 of the way it winds, push in any further and it stops. The touch sensitivity makes fielding the mag nearly impossible with gloves and nerves going. I wanted to love it for how expensive it is, but this tiny flaw out of the box really disapoints.
by richard h. on 12/06/2020
"I hate doing this but i received this magazine for my krytac vector AEG and I literately didn't get a single game out of it. it would feed up to the tip of the mag but if you push on the ball detent for the mag there is no pressure to keep feeding BB's into the gun. maybe mine is faulty, but i bought it and was busy so i didn't use it for close to half a year before i found out it didn't work. so i highly doubt i have any sort of warranty. buyer beware these things aren't cheap. shame on me for not checking it immediately. looks great on gun, feels good, holds a ton of BB's.