(626) 286-0360
Airsoft
Fishing
Air Gun
G&G Polymer 105rd Mid-Cap Magazine for M4 / M16 Series Airsoft AEG Rifles (Color: Translucent)
7 Customer Reviews
by Kyle W. on 09/28/2023
"I have three of these mags and looking to buy four more. They feed better than my PTS mags. The follower is a nice benefit as well but the reliability of these mags are remarkable.
by Leonard H. on 09/14/2023
"The magazine only holds about 100 rounds but is good quality, fits well in my specna arms core series m4a1 carbine with no wobble
by Joshua S. on 08/07/2022
"I like these mags cause they feed every bb that they have inside of them. But they do fot super tight in my vfc m4 block II. So gonna have to samd it down a little for fsster reloads.
by Kasen R. on 06/14/2022
"The best mags I've ever used feel great and look great. I have an APS Phantom Extremis and the mag well is very picky about what mags can fit and don't fit and these mags hit the spot just right and they feed every bb. They feed great with a high rate of fire, and cleaning and maintenance with the mag is very easy. I wish they made an AK mag with the same quality and bb follower!
by fred w. on 10/16/2020
"These are G&G 105rd GR16 magazines.
At the top, front to back measure ~63.8mm, left to right measure ~22.75mm.
Mag catch slot is ~7.90mm from top of mag, ~10mm wide, and ~6.75mm tall.
Feed tube is ~9.2mm in diameter, ~4.9mm above top of mag, and inside of tube is ~4.6mm from front of mag.
~ accuracy is - 20um.
Comes with stickers depicting 5.56 ammo for the sides of the inner magazine. With the stickers on, you can still see the bbs and/or follower from the front of the mag.
Bottom plate lock is easy on the finger tips, and inner magazine insertion/removal is smooth.
Outer shell does not seem to be as strong as the inner magazine.
Feeds well in my gun, but I'm not a high ROF kind of guy.
Aside from the relative free mag load of bbs every 26 loads; the last round follower prevents bbs from getting lodged in the mag well/receiver areas when removing the mag while the gun is not in firing orientation.
At the top, front to back measure ~63.8mm, left to right measure ~22.75mm.
Mag catch slot is ~7.90mm from top of mag, ~10mm wide, and ~6.75mm tall.
Feed tube is ~9.2mm in diameter, ~4.9mm above top of mag, and inside of tube is ~4.6mm from front of mag.
~ accuracy is - 20um.
Comes with stickers depicting 5.56 ammo for the sides of the inner magazine. With the stickers on, you can still see the bbs and/or follower from the front of the mag.
Bottom plate lock is easy on the finger tips, and inner magazine insertion/removal is smooth.
Outer shell does not seem to be as strong as the inner magazine.
Feeds well in my gun, but I'm not a high ROF kind of guy.
Aside from the relative free mag load of bbs every 26 loads; the last round follower prevents bbs from getting lodged in the mag well/receiver areas when removing the mag while the gun is not in firing orientation.
by Francisco R. on 10/14/2020
"First of all, these mags are great. They fit in almost anything and feed every bb. I have an EMG Helios Sr16 and it fit and feeds no problem. There is a video on YouTube by US Airsoft that tests and reviews the mag. My only gripe is the mag capacity, 105 rounds not 250 like Evike say. Over all I really recommend this mag in both variants especially for $12.
by Cody G. on 08/23/2023
"Good experience for the most part, they are pretty picky in regards to what BB's are used. I was using .23s and they would get jammed and not feed into the gun. I would have to give them a pretty solid smack to get the spring to push them to where they needed to be. However, using .20's I haven't had any issues. Even if they didn't work out, they are pretty inexpensive, but it was a little bit of a bummer using my rifle for the first time, and I wasn't getting rounds out.