APS Six Position Metal Buffer Tube for M4/M16 Series Retractable Stock (Color: Multicam Black)

"I was a little skeptical about using this buffer tube on my G&G raider 2.0e with the PDW stock. But everything went together perfectly. There is no wobble or any type of indication that it will come loose. I have not run it in a game yet but it feels solid enough.

"an excellent product of very high quality at a very low cost and an excellent brand is nothing more than to say that it is recommended to buy it you just have to make a small modification in the buffer tube part if its buffer is too long if it is short does not open nothing more to do than put it screwed and ready

"Fits well on my VFC Baby M4. Easy to install. Has numbers along the topside, nice touch. It doesn't have an end-cap, just so you're aware. Fits the LE Stock sold here quite nicely. Only thing is that you should check it for wobble every so often and adjust the screw if necessary, unless you loctite it.

"Exectly what it says, a great metal buffer tube. Recently added an M203 (long) to the front of my M4, so it helps to counteract the weight, and fits well with the LE stock that Evike offers.

"I Recently bought this for my DYTAC PDW to replace the small battery space of the pdw stock for the big space of a crane stock.

It didn't fit on the gun because the channels for the guide nubs on the tube are unusually flat. I had to file down the guides on the back of the gun by a little bit, but once I did that, it fit very well.

Other than that, it is a very nice buffer tube. It has great build quality, holds to the gun very tight and nice, weight and feel are good, and I also like the numbers on it that line up perfectly with a hole in my stock.

I want to give it a 5 star, but the thin guide channels are something that I don't see the reason for and filing the guides on my gun isn't something I would want to do again.

"Does what I was expecting it to. Ordered to stick a stock on my Echo 1 GAT. Castle nut is just for show and is cast into the piece, and the included screw to secure it into the gearbox is a tad short, maybe half the length of the one that came with my Classic Army 416. Otherwise it's perfectly fine and has seated nicely on my gun, and it fits perfectly with the LCT stock I ordered.

"Tube is a solid lightweight build but the metal is pretty soft. Mounting hardware is of good quality as well. Buffer tube will not fit a Madbull aftermarket lower receiver.

"Clean looking Buffer tube, but definitely NOT a heavy weight... coming in at under 100 grams(~98 grams and just under 6.5" in length).
Wish Evike would list more specs of there items...
Seems to fit most if my crane stocks a little lose but with a little black electricians tape, its now has a snug smooth fit.
For 18 bucks, it worth it though.

"You're standard M4 AEG buffer tube. Nothing special.

Pros
Metal
Buffers really well
Tubes really well

Cons
REALLY heavy. Heaviest buffer tube I've ever had.

"It has a great finish, but it is very light, it is not heavy as the specifications explain. From there on out I connect very well, making some small wear on my replica where it connects with the buffer because the guide is narrower. There was a little movement left in the cylinder head, but nothing that affects it, there will be more solutions to eliminate the movement

"Can't say it's a bad buffer tube by looking at it but it doesn't fit my CYMA mk12 spr. the back plate goes over and rests against the gun fine but the buffer tube itself won't slide on at all. Can someone recommend one that does?

"It clearly says in the description it will fit Classic Army. However, not a classic army nemesis...
It was built solid, and Evike was good to take a return, but did charge me a restocking fee, and I paid for return shipping.
I love Evike, just not this product.

"Didn't come with the screw thank you for sending without the screw. Now I can just hang it it my room to collect dust.