(626) 286-0360
Airsoft
Fishing
Air Gun
5KU PT-1 Gen2 Folding Buttstock for AK Airsoft AEG Rifles (Model: E&L Version / Tan)
6 Customer Reviews
by Eric M. on 09/12/2024
"I purchased the black E&L version of this stock for my E&L AKS-74N (Gen 2 I believe.) It dropped right in with no modifications needed. The only issue is that the adapter doesn't sit flush with the end of the receiver, so the stock is slightly angled to one side. It is barely noticable to the eye, and I can't tell when I shoulder it.
One thing of note is that the length adjustment tab has to be pushed in to adjust the stock, not just flipped up like the PT-1 stock that comes with the Arcturus PP-19. The cheek riser works as expected.
Overall, I am very pleased with this stock, and am glad to have finally finished my Zenitco AK build.
One thing of note is that the length adjustment tab has to be pushed in to adjust the stock, not just flipped up like the PT-1 stock that comes with the Arcturus PP-19. The cheek riser works as expected.
Overall, I am very pleased with this stock, and am glad to have finally finished my Zenitco AK build.
by Chris L. on 07/03/2023
"I bought the Tan cyma version of the stock it works pretty well and i did spray paint it black over a good stock with a little wobble but I don't mind it and can be fixed easily
by Josh L. on 12/07/2022
"Mine went in no problem swings.. locks... open or closed not hard to figure out no wobble satisfied buy
by Kevin L. on 12/04/2023
"Ok so this is a solid stock that looks and feels amazing. However, there are a lot of small issues that add up, so I'm removing a star from that.
- First of all, there is no instructions manual. No guide on how to install the stock and no recommendations or troubleshooting guide. I couldn't find one online either.
- While the stock is rock solid, the adapter that connects the stock to the side folding end of the gun has a bunch of issues. First of all, the PT-1 to the adapter did not fit perfectly. There was some play. I was able to remove this play with some electrical tape and tightening down the screw a lot, but you would expect the parts that comes together in a kit to fit together.
- The stock adapter connection to the end of the gun was wobbly. This is a limitation based on your GUN's hinge, not the adapter's issue. However, I feel like there was a lot of things that can be conveyed better that could have helped reduce the wobbling or saved me a lot of time troubleshooting.
- First of all, there is no instructions manual. No guide on how to install the stock and no recommendations or troubleshooting guide. I couldn't find one online either.
- While the stock is rock solid, the adapter that connects the stock to the side folding end of the gun has a bunch of issues. First of all, the PT-1 to the adapter did not fit perfectly. There was some play. I was able to remove this play with some electrical tape and tightening down the screw a lot, but you would expect the parts that comes together in a kit to fit together.
- The stock adapter connection to the end of the gun was wobbly. This is a limitation based on your GUN's hinge, not the adapter's issue. However, I feel like there was a lot of things that can be conveyed better that could have helped reduce the wobbling or saved me a lot of time troubleshooting.
by Brian M. on 03/15/2022
"Mounted on an LCT PP-19**
Quality of the stock is decent. It looks cool. There’s a lot of neat features.however, the holes for the rubber stock pad aren’t threaded well. Also had a few issues with wobble, and used black tape as a buffer.
5/10, would recommend looking for an alternative
Quality of the stock is decent. It looks cool. There’s a lot of neat features.however, the holes for the rubber stock pad aren’t threaded well. Also had a few issues with wobble, and used black tape as a buffer.
5/10, would recommend looking for an alternative
by Leonard E. on 10/07/2021
"This product is ridiculously overpriced. The build quality is sturdy and has no wobble, HOWEVER it came out of the box looking as if it has been used before. There were scratches all over, paint missing from the cheek riser knobs and the metal piece given to you to put underneath the folding lock is made of this soft iron (or something). It has ZERO instructions as to how to install it. I watched a tutorial from Zenitco to attach the stock but the parts are not the same. I cannot fold my stock because the “iron” piece moves out of place. If this were half the price, it would be a 5 star. Unfortunately it’s criminally overpriced. Find a used one on Reddit or hopup.