Classic Army Polymer KM10 M4 Airsoft AEG Rifle w/ 10" KeyMod Handguard (Color: Black / PDW Stock)

"Great gun, all the way.

Pros
Good rof
Rotory hop up
Nice mag
Nice battery
Nice overall performance
Threded berral
Flash hider screws off easy
High fps
Changable springs are easy to install
EVERYTHING

cons......
Non

"Awesome Gun for any Beginner or Intermediate player.

You really do get what you pay for with this gun, For the price you pay you get a quality gun with a nice feel to it, it does have a decent weight for a plastic gun but there is no flex in it compared to your low grade ABS plastic guns.
Consistent FPS
MOSFET built in
Easy to upgrade platform (Internals & Externals)
Handles an 11.1 Perfectly
Runs great with a High Torque Motor
Easy Quick change system and gun take apart

Cons
I have no complaints about this gun other than wanting to put so much into it!

"It's worth it if you're looking for something in this price range I just received mine in it handles like a dream there's really no pros and cons is gun is super reliable

"I've had this gun for a while now and it's pretty good. Out of the box a little lackluster but with a few mods its good, light, and cheap.

I'd recommend: ZCI 6.02 300mm barrel, Maple Leaf Super Macaron 70° bucking, Rocket Airsoft High Torque Motor 16TPA, ASG M135 spring. Re-shim and short stroke the sector gear 4 teeth (2 on each side). I also modified the body to make it a true quick change spring.

"So i got this gun a few months back and it performs great there is no wobble on the gun and it is solid the only con i have is that in the descrition it says it comes with the ECS which it doesnt which i was really disappointed about that

"Great beginner gun!!! I'm about 6 months into airsoft
And I love it
Very durable
Shoots acc
About 360 FPS.
Very reliable

"Got this gun for Christmas and have been using it at my local indoor airsoft field with no problems. Comes with 2 3" rail sections that I didn't know it came with so that was a nice surprise upon opening the box. Gun is fairly sturdy and easily adapts to any attachments you put on it. Fire rate is solid and chronos right at 347-349 fps with .20s. Only problem I had with the gun is the high cap mag that it comes with is pretty much garbage and didn't really work, however, I bought three mid caps and they have been working great. Highly recommend this gun to beginners and more advanced players alike.

"Pros

Polymer doesn't feel cheap
Has a flat trigger
Trigger has a nice click
Different firing modes
Decent rps

Cons

Motor gets hot
Fps is a little too low (it's fine for cqb)
I don't know if I just got a defective gun but it shoot inaccurately, bbs fly to the left and the right

Overall, decent gun for beginners if only it shoots accurately

"I ordered this gun instead of the G&G because of the features vs.price. Upon opening the box I was initially impressed. The polymer body is very solid with no noticeable wobble, the stock doesn't move too much on the buffer tube. The keymod rail is the same polymer as the receiver and it attached in a rather unique fashion but very solidly. The upper receiver IS threaded so the front end can be swapped out if you so chose.

I have used the gun 3 days now. I took it in stock form the 1st day. I was immediately unimpressed...with .25g bbs it chrono'd at ~290 fps and the hop up was everywhere. That night I tore it down and found that it had almost no compression. I changed the o-ring and it was slightly better. I also installed a heavier spring out of my box.

On day 2 it still chrono'd at around 270 fps even with a new o-ring and heavier spring. and again dialing in the hop up was next to impossible. After 10 minutes of the 1st game the gearbox locked up tight. I swapped the spring back to stock and it freed up but went right back to ~285 fps.

Day 3 I found that the cylinder was too large and wouldn't hold compression I swapped it out and problem solved. I tried the stock spring and got ~265. So I put new bucking and a Modify barrel....no change. I put the heavy spring back in....gearbox locked up. So I change the motor and put a different spring in and got the fps up ~320

Overall the gun looks great but under performs. I could have gotten a lemon as I have seen some good reviews

Pros:
Looks great
MOSFET gives a quick response
Wired with Deans plugs
very solid body
Cons:
very poor internals

"It was a very rock solid gun performed pretty well.
Then it dropped from 4 feet and since it is all polymer it broke the front barrel off. I know classic army is trying to make good guns for the price but the material is a piece of junk

"1/5

Con's Everything.
except.
ROF
and
The body

Pros.
Nothing except the body
and rof

Don't waste your money.