Matrix Terminator Conversion Kit for P90 Series Airsoft AEG Rifle

"Nice conversion kit, the suppressor actually works and everything else as well. The only bad thing is that it is heavy and loud which is very bad for airsoft so take that into consideration.

"I got this for my JG P90 and everything fits very nicely and I replaced the cheap Hi-cap mag with a 360 rd. Lonex Flash Mag (really helps with practicality and there is less time for winding). Thus I'm dishing out 1860 rounds with only a total of 30 seconds winding time. Red dot sights match with this lovely looking kit and a grenade launcher on the bottom as well as a battery attachment on one of the sides and you are set my friend for some awesome suppressing fire.

One thing the box mag has some space in it for the M4 to jiggle but a little electric tape would solve the problem. Loading the M4 mag is kinda tricky, but you will get used to it! The box mag itself has a great fit into the gun and there is no wiggle. The suppressor offers space for a 363mm inner barrel and the tri-rail extension fits on to the front very nicely. But there is about a 1cm wiggle distance but you can probably fix it with some adhesive or tighter screws. The only thing id have to complain about or worth being noted is that :
1)Makes the gun very front heavy (but balance weight distribution) so you aren't as capable in close quarters as before.

2) NO INSTRUCTIONS And some screws were busted (the kit still worked)

3) Box mag only allows right handed shooters to have a correct grip on the gun and makes noise due to the masses of BB's bouncing around.
I give this conversion kit a 9/10

"Everything fits great on my JG P90. Adds quite a few pounds to the gun, but it isn't unbearable at all.
Pros: Looks awesome.
1800 BBS at once!
options for bigger batteries.
rails for more accessories. (I put a mini Grenade launcher on mine.)
Silencer gives more accuracy.

Cons: Comes with a cheap hi-cap M4 magazine
No assembly instrucitons or tools to put in bolts.(luckily a had some but it requires a few allen wrenches.)
Mag release for the M4 section doesn't really work. Seams like its to tight. I would have to take it apart and figure that out. It's not a big deal because you don't need to take the mag out, because the box feeds into the mag.
heavy-ish.

Overall, its a great deal, speaking as you save somewhere around 80 dollars getting it like this.
Definitely worth it.

"Fits my JG P90 like a glove!! Looks great. Took about 10 minutes after I figure ed out what goes where.

I put a Matrix 6.03mm 363mm long inner barrel in it.

The kit included a 300 round hi cap magazine but I am using a Matrix 500 round hi cap magazine to give me even more rounds to shoot before reloading.

Once you install this kit you never have to remove it. EVER. You can maintain and upgrade the gearbox without having to remove this and you can even get a separate upper receiver to switch back and forth. The suppressor can be used by itself to hide the longer barrel.

PROS:
Looks awesome
Can fit up to a 395 mm inner barrel
Takes 10 minutes to assemble
Awesome kit for good price!


CONS:
No instructions but it was not hard to figure out.

Rate 10/10

"What a great deal!!
I own some of this equipment already for my TM P90 and buying in seperately was WAY more.

"The rail kit & box mag are amazing. However, I recommend buying them separately (even though the full kit was only $12 more expensive when I ordered it) as the silencer & magazine leave a lot to be desired

The silencer has a big fat ugly orange tip, it’s ~150mm long which just barely extends out of the rail system, the paint gets scratched SUPER easy, and the end cap feeds clockwise into the main body cylinder so you basically have to glue it in otherwise something will come unscrewed while you’re attaching it counterclockwise onto your gun. Definitely look into high quality alternatives- it’s 40mm in diameter so that gives you lots of options to shop for.

If you haven’t seen how the box mag actually works, you insert an M4 high-cap into it with the reservoir lid open, the BBs gravity feed from the box into the high cap, and the tension from the high-cap is what feed the BBs into the P90. So long story short, you’ll most likely want to get a flashmag instead of the winding high-cap.

The rail looks great amazing. It’s angled upwards a few degrees on my gun, which I’m sure just depends on exactly what brand you’re attaching it on. Not a huge deal to me, but some people might not like that if they’re trying to attach a well-sighted laser.

I only docked it down to 4 stars just because the silencer is so bad & winding mag isn't ideal. I rate the rail & box mag to be 5 stars individually

"everything is great but my suppressor has no barrel inside... but there is a spring... i dont think thats normal... has anyone else had this issue?