Lonex TITAN Airsoft AEG Motor (Type: Short Type / High Torque)

"Gave me about ~8 RPS more than what I had stock. Pair this with a 13:1 gear ratio and a MOSFET and you'll have people think your running HPA.

"This thing is an absolute beast, and will make ANY setup scream and beam bb's in what feels like a constant stream. This motor was the first upgrade done to my new g3 microswitch m4a1 cybergun, and it effectively doubled my rate of fire just by pairing this motor with an 11.1 li ion battery. You will feel an instant change in trigger response, as well as a disturbingly high fire rate for not much effort or work. Just make sure that your gearbox is properly shimmed and the motor height is correct before installing. If the gears are grinding or locked up, this motor will DESTROY the inside of your gearbox in a hurry with how fast and torquey it is. Currently sitting just over 30 rps with this motor, a heavier duty m140 maddog spring, and a maxx cnc nozzle. If you're unsure whether to go for torque or speed, this is the motor.

"Really good upgrade for my terminator fn herstal p90 I also got a m210 spring and it runs amazingly I’m getting around 610fps on my p90 I only use it for milcents

"Got the short type, high torque, to replace a burned out one in my ICS L85A2. Not sure what had burned it out (running Semi-only field, pounding rounds, and just ended up with a dead trigger). After debugging found that the motor was dead. Replaced it with this Titan and it's better than before. Works fine in the motor cage (although a slightly different height adjustment. Meshes with the L85's gears just fine, and pulls the spring with no issue. I'm not a ROF clown so I cannot speak to how it sits but it's definitely a bit faster than the original stock motor.

"Absolutely wonderful. Just make sure it is adjusted correctly. If you don't it will grind or not even contact the gears. In my case I was lucky because it was shorter than my own motor and it didn't do any damage. Just do your research kids.

"Really good torque, excellent upgrade for my 249.

One thing that pisses me off so much though.
The magnetic pull of this thing is so strong and it makes everything a hilarious nightmare. Makes finding launched springs easy though because they don't fly across the room, but stick to it.

"SHS OEM 13:1 gears and a 35C 2,200 mAh 11.1v get me 37rps with this motor on a full charge at 380 fps. Have feeding issues because of the speed, but it may be my mags. Lonex flash mags get here tomorrow, I've heard tons of good stuff about em, people using them in 50 rps builds gives me hope it'll solve my problem.
This motor is really snappy and responsive! Good buy guys!

"Installed this into my KWA G36C when the stock one stuttered first time on the field. I have had no problems with it afterwards and it has ran like a dream, amazing motor.

"Fantastic motor. It pulls my m140 as fast as I can pull the trigger with nickel 9.6 batteries. I was going to throw in a mosfet & 11.1s but I just don't need to. This guy is a champ.

"Decent motor. Does the job on a G36 I have it on. Pulls back a M130 spring without issue and works well.

"Excellent motor with a long life span. I've had mine in a G&P rapid fire for the past two years and it has only lost a few rps. It's running ~30 rps @ 415 -/+ 5 with and 11.1v lipo.
10/10 would buy again for any custom guns.

"Just installed the motor last week, 11/10 performance at its first game, works very well with 11.1 and m120 spring, even with a 7.4 lipo, it shoots as fast with the 7.4 using new motor as the stock motor did with the 11.1! And with the 11.1 and new motor average of nearly 20rps! GG Lonex GG! It made my nearly 3 year old G4-a3 go from Good gun to incredible

Pros:
Extended battery life, faster rpm, sounds sexy, with the m120 shooting around 400fps (great for woodland games)

Cons:
You dont have one

"I bought this motor about a year ago from another retailer who had them on sale. I was very pleased with this motor, however, I burned it out (and my trigger contacts) by running high c rated lipos with out a mosfet or fuse. Roughly I burned out four trigger sets by running lipos this way. If you are going to run lipos without a fuse or mosfet, make sure they do not exceed 7.4v 20c.

Great motor though, get it if you need torque for a high speed or high FPS build.

"I run a jg zombie killer cqb version with an m120 spring getting consistent fps around 320 and 15 rps. Only issue I have was with my motor's compartment wasn't wide enough for the a1.
Still love this motor recommend it to anyone looking for higher fps and rps

"I've run this motor for 2 years while using an s120 spring, and it has performed flawlessly all the way through. Amazing motor, would highly recommend.