APS 23rd CO2 Magazine for XTP Series Airsoft GBB Pistols (Color: OD Green Baseplate)

"This works real well in my AAP01. I’ve put more than 150 shots through it without a problem. Think I’ll buy a couple more! Wish there was a ten star scale, I would like to give more than 5 stars!

"Short and simple review!

Lots of people have had leaking issues with their mags, but mine have been perfect. Great mags, feed perfectly and have nice weight to them.

Pros:
Great quality, weird but very functional CO2 positioning

Cons:
Honestly none!

"Works great when you get the hang of it!

"Mag fits perfectly in my APS shark. I ordered this because the mag that came with my gun was leaky.

"If it is the magazine in the picture, with the little indent cutouts then this is the best magazine. Its easy access to add and remove the Co2 cartridge. This is the best style they have made yet.

No cons.

"The new updated version of the magazine is really good. Easy to use, load, and feed. I have not had any feeding issues so far and I have used the magazine over 20 times.

Pros:
Solid construction
strong spring to feed bbs
nice weight
base plate is held on
no leaks

Cons:
CO2 valve can be leaky if not properly lubricated.

"So far this is a great mag.

Pros:
No leaks
Heavy (I like the realistic weight)
Nice finish
Feeds well

Cons:
Nice finish, BUT this mag WILL get scratched in the mag well over time
No other cons

"This mag is awsome. It may seem like a pain and also unnecessary for the trouble to put the co2 in but it acts as a regulator. However the mag is difficult to load and to get all the bbs to be double stacked it is pretty much necessary to load each bb individually but in a game you can load with a speed loader.

"This is an iffy mag. Period.

I got the APS ACP with a extra mag, which a huge plus, but being these aren't the best magazines on the market many would rethink their decision probably after reading the other review on this too. But I'm here to say otherwise. With plenty of silicone grease you can make these mags work beautifully. The internal O-rings will dry out after two co2 cartridges so grab your can of grease and give it a good spray before loading another! Do it right on the screw and your good to go. Don't, and you'll get a face full of bad smelling co2 (this occurred twice to me and trust me, it smells bad) Other than that, the puncturing pin is sticky so you'll also need to twist in the cap quick.

Overall it's a great and cheap mag (some go for $40!) as long as you take good care of it.

By the way, use a little sticky tack to keep on the bottoms of those mags!

"Great mag can't stop using them hint it is a reverse mag

"Great mag! I have 4 of these in all and they work awesome. Every so often, they will leak for up 30 seconds when I first out the co2 in but it stops right after.

"work great. No leaks or problems

"Two of the tree mags I received were good and work fine but one was delivered broken leaks air out of mag. Working on return now. Also I get to full mags shot per co2 cartridge. Over all not bad

"Mag functions fine, but the O rings need to be replaced. The O rings on the cap for the CO2 are very poor quality, causing leaks.

"Mag arrived leaky (wasted a few CO2 canisters testing) but I let the part that you screw on to puncture the CO2 sit in silicon oil overnight and now the mag functions flawlessly. One of my orders of silicone oil had leaked in the plastic baggie it arrived in so that's what I used to soak that piece, I made sure that the secondary/inner screw part was around halfway so that the oil could get to that o-ring too. My assumption is that because the mag arrived with everything screwed together tight that the o-ring got compressed to the point of no longer sealing the gas chamber. I have more cons than pros listed down below but the cons are very minor even if more plentiful.

Pros:
-New baseplate design seems to stay on better than the original one that just slides on rather than clicking in

-Easy to refill CO2 and BBs

Undecided:
-New baseplate design looks weird to me. I like the old one better looks wise but this new one functions better. Who knows, maybe the new design will grow on me over time.

Cons:
-Arrived leaky but it was easy to fix

-Finish has started wearing on the high contact points. This is expected considering that it is wearing in the same spots as with the gun's included mag and will not affect functionality.

-Pistol mag speedloader adapter does not seem to work. A friend of mine grabbed one of my mags thinking it was his Echo 1 Timberwolf's mag which takes the speedloader adapter just fine and found out that it didn't work with mine. I honestly could care less about the adapter because I don't like using it in the first place.

-The gas release is not as smooth as with my original mag. It goes in and out just fine but makes a faint scratchy noise. The mag functions just fine nonetheless but the manufacturing tolerances may not be as good.