Matrix High Performance Airsoft AEG Motor (Type: Sonic - Super Speed / Long)

"Installed in a DMR build ( MK 18 AMERICAN SNIPER STYLE WITH MOCK SUPPRESSOR .) shooting 500 FPS on a M 150 spring locked on semi auto only no PROBLEMS BOUGHT ANOTHER ONE TO BUILD ANOTHER DMR BUT M16 A 4 KINDA LIKE AN EARLY DESERT STORM STYLE YES I KNOW IT WAS AN M16 A3 NOT A4 BUT WANT NEED THE FRONT RIS

"Well built motor. I installed it in a CYMA CM048 (AK74N) with the Jefftron Leviathan V3. It shoots snappy and aggressive while running with 11.1v and 7.4v battery. Excellent budget motor from Matrix!

"Replaced the ASG 30K motor with THIS motor. The 30k had some trouble pulling the simple m130 I had in my aster build with 16:1 gears and the motor and battery got too hot to touch so I used this motor instead and it got rid of my HEAT problem and kept the same Gate Aster Trigger response versus the 30k I had. I bought this a second time for my other builds. This is the most powerful motor ever. Attracting every magnetic piece of metal even through a thick PTS pistol grip, it never ceases to amaze me. Buy this Long type High torque option. You will not be disappointed I promise you.

"Very reliable motor that gives amazing trigger response. Highly recommend.

"Use one of the Long Type Super Torque Motors paired with an advanced Gate Titan in a DSG build I have. It works absolutely perfectly, with a very nice trigger response and a very good RPS on full auto as well as a super crisp and snappy semi.

I get a comfortable and reliable 35-40 RPS, where the motor tends to not get hot very often. Only when I shoot excessively, like 300 shots in a 2 minute window does it start to get warm.

I'd highly recommend this motor as a budget option for any build needing a 22TPA motor. It is well worth the money and is a cheaper option to something like an ASG Infinity.

"Have this in a A&K m249. Using a 110 spring (full stroke piston) and 26.1 gears Im getting 25rps @ 385fps. I have run an M140 at the same RPS @ 480fps (.25g bb) with no issues.

Run on a 11.1v 4500mah 30C lipo through a Brill armory tactical Nukefet, and it has run well over 10k rounds with no issues so far. Very little reaction time between trigger pull and firing even with 26:1 gears. Running a light spring and 16:1 gears this is capable of achieving 35rps with a full stroke piston.

"This motor is stupid torque, it is crazy. When i bought it I didn't expect it to have this much torque but hey the more torque the better but not always. I only pull a m130 spring in my gun but I bet this motor could easily pull a m160 or 170. It gives my gun excellent trigger response as well. The magnets are also crazy and it will attract any metal it can so keep it away from anything but your gearbox. Even though the motor is in the grip of my gin if I put next to a bunch of screw drivers they all stick to it.

"This is a great little motor!! It has torque all day long, l am running a m150 spring and it takes it, l threw a m170 for sh#ts and giggles and it pulled it, dont have any complaints about it.

"Extremely good motor but do not use the stock pinion gear get a better one or it will break and destroy your internals

"Bought two of these. One for my MK22, and one for my Star XR-5. Works flawlessly in both guns.

"1st upgrade motor in my 1st, and ongoing airsoft (& aeg) build.
No Chrono on it but it put my upgraded L96 variant @~"500fps" to shame.
SHS 100:200 helical gears, non linear quenched M135 spring all aluminum piston components with full steel 1/2 teeth, thru a unibody rotary aluminum hopup with madbull tighbore 6.03mm x 509mm barrel via a 12v NiMh battery @ 15rps. Kept clean and air tight
Not the fastest rof, but it will enable you to hit your targets at range while conserving ammo. giving you that warm, fuzzy feeling inside. Notable trigger response and excellent burst fire capability especially with high powered batteries.
Barely noticeable, less concerning increase in resistance switching from a stock M120 spring to a high grade M135.
As others mentioned, the motors stock D type gear does wear fast. Buy a replacement before implementing for gear longevity. Also the length of the motor (maybe rear cage) required the butt cap screws to be backed off even after pulling back / out the motor engagement screw. Same scenario on two different handles.
Maybe I'm doing it wrong, hehe, but now I'm proudly shopping for a new gearbox. This motor will find the weakest link in your gearbox chain.

"Amazing. Installed in G36c H&K Umarex. Had to use the stock spring as the one that came with it was too tight. Worth every penny. Fantastic. 10 out of 10. Would buy again

"Buy this motor It fits perfect for the JG Comlete Lipo ready G36 gearbox. easy install.

"This is a very good motor. Great when on sale for $45 or less.

Installed in a v2 gearbox using 12:1 gear set to push an M120 spring with an 11.1V lipo. Getting about 22-25 rps.

The only catch - like all AEG motors - is that this is a brushed motor so you have to maintain the brushes & clean the armature periodically to maximize power and efficiency.

Like the other reviews, this motor has super strong magnets

Going to buy a couple more for my other AEG's.