Matrix Airsoft PEQ-15 Battery Box (Color: Black)

"So this says it has room for a battery 70mm x 45mm x 20mm. I put one turnigy 2s pack that is 69mm x 43mm x 16mm and it BARELY fit. I was delighted it did. Definitely do not go any bigger than what I did. The length was borderline but the thickness is affected by 2 things: the allen screws on the mounting plate and the colored allen screws on the outside. These need to be trimmed becuase fully seated, they protrude to the inside of the box. Do this otherwise your battery will certainly not fit. There are 3 machine screws you need to remove to pry the box open and slide your battery in. On the rear there is a decorative knob you rotate and remove so the harness can come thru. Great for smaller smgs where you cant stick a larger awkward peq. It also comes with many stickers of different colors. Highly recommended

"Super cool looking moc peq unit! It is made out of a nice polymer and it does come with the warning sticker and a few other types of stickers as well for it. Highly recommend it if you want to add that cool modern look to your gun without spending $$$ for a real one.

"Its for prop proposes only, and does very well at that. Light weight and holds tight

"It's pretty cool, doesn't do anything but stick on the side for props, but looks pretty sick if your tryna go spec ops mode

"Crappy quality, two screws keep almost any battery from fitting. I had to file extensively to fit a battery into this.

"This box WILL NOT FIT MATRIX PEQ BOX BATTERIES. There are two screws that stick out into the inside of the box and keep almost any battery from fitting in. It required quite a bit of filing to fix, and I needed to drill a hole in the back for my battery wires.