A&K 360rd Metal Hi-Cap Magazine for SR-25 Series Airsoft AEG Rifles (Color: Tan)

"Bought 2 of these for extras and been running them for a few years. Not sure how many round through them but if I had to guess I's say about well over 20000 between the oem one and 2 spares. Never had an issue. Here now looking to get more.

"Well built and loads all but the last few bb's. But I write this review to say that these mags are good for A&K SR-25's BUT NOT the Matrix SR-25. The mags are about 1 mm to long. Will not fit without modification.

"Worked perfectly in my SR25K, even with a lipo shooting 20 rounds per second the magazine worked flawlessly, and still is after 3 years.

"I have five of these mags for my Matrix Custom Sr-25 by A&K and they work flawlessly

"Good mag! It might need a hard push to properly feed the bb's into my rifle. Haven't had any problems with my 6 mags yet.

"New to airsoft but so far these mags are great. This hi cap feeds well and fits snug in my SR 25K. Only con for me is I purchased 4 of these but recieved 3 sr25 mags and 1 m4 mag lol. Anyway great buy, I recommend this mag.

"The midcap version of this mag will fit a Classic Army M110, providing that the sides of the plastic top are shaved down to match the width of the metal case sides.

Will leave a few bb’s when “emptied” but the best “bang for the buck” SR25 mag out there, about half of the cost of the Classic Army ones.

"Did not fit in my echo 1 er-25k without some help. Needed to sand the front and back down to metal before it would slide in. Still fits very tight but feeds fine. The lid to the bb fill hole is crazy lose and will spill if turned upside down.

"Bought 6 of these. They work fine in my Echo1 ER-25 without problem

PROs

* Metal construction
*Fit smoothly in my Echo1 gun
* Reliable feed mechanism

CONs
* One was just a little tight in the mag well of my ER-25 but did not stop it from functioniong properly

"I Bought one for a Matrix SR-25K Full metal frame and the mags won't even go a couple millimeters in before getting stuck. I thought it fit since it said it was compatible but by the looks of it it doesn't.
I might have to shave the mag well to fit it.

"DOES NOT fit Matrix sr25, but I was able to sand down the plastic at the top and make it work. I used sandpaper and hit the sides and corners. Matrix sr25 says they are compatible with these mags, after modification works fine.

"pros
full metal
high capa
light weight

cons
the one I got fits so tight in the mag well that i have to smack it in for it to work properly

"These mags wil not feed into my 25k! The mag that came with it does though! Makes jo sense



PROS
-metal

CONS
-does not feed
Or work properly