(626) 286-0360
Airsoft
Fishing
Air Gun
Officially Licensed Noveske N4 Gen. III Full Metal Receiver for Airsoft M4/M16 AEGs by Madbull (Color: Black)
5 Customer Reviews
by Graham G. on 07/12/2020
"Solid receiver and happy with the end result. I had some similar issues as others have mentioned. The dustcover door is pretty crappy and mine pops open all the time, so it was replaced with one I had laying around. Due to the design of the Mag Release slot, it is hard to find a Mag Catch that fits directly, I had to bore our the hole on the lower receiver, normally the mag catch/release just need to pass through the gearbox shell. For the Bolt Release, I found that the Krytac Trident fits and the spring loaded design allows it the clear the upper when installing on the lower. https://www.evike.com/products/76658/
by Drew H. on 05/28/2020
"Amazing product. Was very surprised with how good the quality Is. The other reviews said it didn’t come with a dummy bolt, but it did. The hop up is pretty good, but I am definitely going to replace it. My only problem is that it doesn’t work too well with the Magpul style hi-cap magazines, but that is more of the mags problem. Overall-
PROS:
Sturdy
Comes with all receiver accessories beside a bolt catch
High quality and good weight
CONS:
Had to drill a little bit to get the magazine catch to go in
Front pin is a little tough to fit when gearbox is in
Some polymer magazines don’t work
I will definitely be buying this again for another project!
PROS:
Sturdy
Comes with all receiver accessories beside a bolt catch
High quality and good weight
CONS:
Had to drill a little bit to get the magazine catch to go in
Front pin is a little tough to fit when gearbox is in
Some polymer magazines don’t work
I will definitely be buying this again for another project!
by Zachary M. on 02/28/2020
"Excellent quality, very clear trades, sturdy finish. I have two problems with this receiver.
1) It's hard to put a MK18 rail onto it because the upper is so wide - it doesn't allow the screws to pass from the baseplate to the rail.
2) There is probably no bolt catch/release that fits this thing due to the same problem.
If you don't care about putting a RIS on, or having a bolt catch, buy this thing.
If you're curious about what it comes with, it comes with the retaining pins, dust cover (installed) forward assist (installed), charging handle (installed) and what I believe to be a milspec buffer tube set screw.
TL;DR - if you don't have a dremel, don't buy it.
1) It's hard to put a MK18 rail onto it because the upper is so wide - it doesn't allow the screws to pass from the baseplate to the rail.
2) There is probably no bolt catch/release that fits this thing due to the same problem.
If you don't care about putting a RIS on, or having a bolt catch, buy this thing.
If you're curious about what it comes with, it comes with the retaining pins, dust cover (installed) forward assist (installed), charging handle (installed) and what I believe to be a milspec buffer tube set screw.
TL;DR - if you don't have a dremel, don't buy it.
by brian n. on 01/09/2018
"very very nice bit of kit! but not for the faint of heart.
PRO:
very heavy and robustly made, it includes the dummy bolt, charging handle, front and rear pin, gearbox pin, and fire selector as well as a plastic hopup unit.
CON:
the dummy bolt catch and mag release are not included, i have yet to find a bolt catch that will work and clear the upper. Also any TM compatible mag release should work but the hole for the shaft may need enlarged as mine did. the front pin hole did not fit the included pins and also needed reamed to fit.
Overall its a great set just take your time and be sure to check the fitment of your components and ream and file to fit as necessary and use the right tools for the job not a dremel/drill. find some cheap reamers and jewelers files. "hint hint" guys to add to the tools page. ;)
PRO:
very heavy and robustly made, it includes the dummy bolt, charging handle, front and rear pin, gearbox pin, and fire selector as well as a plastic hopup unit.
CON:
the dummy bolt catch and mag release are not included, i have yet to find a bolt catch that will work and clear the upper. Also any TM compatible mag release should work but the hole for the shaft may need enlarged as mine did. the front pin hole did not fit the included pins and also needed reamed to fit.
Overall its a great set just take your time and be sure to check the fitment of your components and ream and file to fit as necessary and use the right tools for the job not a dremel/drill. find some cheap reamers and jewelers files. "hint hint" guys to add to the tools page. ;)
by Michael N. on 02/11/2016
"Just received mine today. These are much better than the other Madbull body kits. Came fully assembled.
Major flaw 1: Ive tried 4 different brand of bolt stop and NONE if them will allow the upper receiver to slide on. Simply wont work.
Major flaw 2: the mag catch that it comes with striped itself. It will not work with any other mag catch without dremeling.
If you can somehow get the bolt stop to work and dont mess up the mag catch then this is a very nice kit. Lightweight too!! Fit a g&p and vfc gearbox.
Major flaw 1: Ive tried 4 different brand of bolt stop and NONE if them will allow the upper receiver to slide on. Simply wont work.
Major flaw 2: the mag catch that it comes with striped itself. It will not work with any other mag catch without dremeling.
If you can somehow get the bolt stop to work and dont mess up the mag catch then this is a very nice kit. Lightweight too!! Fit a g&p and vfc gearbox.