(626) 286-0360
Airsoft
Fishing
Air Gun
LCT Airsoft AK G-04 NV Full Metal AEG with Real Wood Furniture and Side Folding Stock
6 Customer Reviews
by Lawrence M. on 05/16/2023
"I have had this gun for a while now and here are my critiques.
From what I have seen and experienced, when you are buying LCT, you are paying for the quality of the parts, not the performance. I upgraded practically all of the internals of the gun to compete with all the other players on the field while also having the style and uniqueness of an LCT AK .
--== My Personal critiques on the guns body: ==--
- The Upper handguard Heat shield looking thing can be slightly rotated around the gas tube if you are man handling it but should have no reason to be an issue. I've pinched my hands taking it out multiple times.
- The Firing selector is super stiff and can be over selected downward by a fraction of an inch which is unsatisfying when switching to semiautomatic.
- When putting a magazine into the mag well, you have to make sure you are not inserting too much of the magazines lip when reloading or else the mag will hinge too far into the gun and will put pressure on your hop up unit.
- Very spongy trigger.
- My gun straight up didn't come with the flash hider shown in the picture while my friends did _:(
--== Why I like it: ==--
- You could drop this thing from orbit and it will not care.
- Stock has little to no wobble.
- Racking the real steel slide is auditory perfection.
--== Upgrades I found useful: ==--
- Perun AB++ MOSFET (Buy a Gate Titan if you have the extra cash)
- Lonex Steel Spring SP120
- SHS CNC Machined Lightened Aluminum AEG Piston with Stainless Piston Teeth (Half Teeth)
- Matrix CNC Machined Steel "Super High Speed" Airsoft Gear Set (Ratio: 13:1)
- Lonex TITAN Airsoft AEG Motor (Type: Short Type / High Torque)
- Prometheus Air Seal Chamber Packing / AEG Hop Up Bucking (Type: Soft)
- Prometheus 6.03 EG Tight Bore Inner Barrel for Airsoft AEG (Length: 363mm)
- Lonex POM Expanding Piston Head
--== Final Thoughts ==--
This gun was built to last. The parts quality is unmatched. The only downside about this gun is the lack of documentation. I would not recommend this as your first gun unless you are ready to empty your wallet and your schedule to watch 10 year old tutorials on an already niche gun for a month. Ask me questions if you need input.
From what I have seen and experienced, when you are buying LCT, you are paying for the quality of the parts, not the performance. I upgraded practically all of the internals of the gun to compete with all the other players on the field while also having the style and uniqueness of an LCT AK .
--== My Personal critiques on the guns body: ==--
- The Upper handguard Heat shield looking thing can be slightly rotated around the gas tube if you are man handling it but should have no reason to be an issue. I've pinched my hands taking it out multiple times.
- The Firing selector is super stiff and can be over selected downward by a fraction of an inch which is unsatisfying when switching to semiautomatic.
- When putting a magazine into the mag well, you have to make sure you are not inserting too much of the magazines lip when reloading or else the mag will hinge too far into the gun and will put pressure on your hop up unit.
- Very spongy trigger.
- My gun straight up didn't come with the flash hider shown in the picture while my friends did _:(
--== Why I like it: ==--
- You could drop this thing from orbit and it will not care.
- Stock has little to no wobble.
- Racking the real steel slide is auditory perfection.
--== Upgrades I found useful: ==--
- Perun AB++ MOSFET (Buy a Gate Titan if you have the extra cash)
- Lonex Steel Spring SP120
- SHS CNC Machined Lightened Aluminum AEG Piston with Stainless Piston Teeth (Half Teeth)
- Matrix CNC Machined Steel "Super High Speed" Airsoft Gear Set (Ratio: 13:1)
- Lonex TITAN Airsoft AEG Motor (Type: Short Type / High Torque)
- Prometheus Air Seal Chamber Packing / AEG Hop Up Bucking (Type: Soft)
- Prometheus 6.03 EG Tight Bore Inner Barrel for Airsoft AEG (Length: 363mm)
- Lonex POM Expanding Piston Head
--== Final Thoughts ==--
This gun was built to last. The parts quality is unmatched. The only downside about this gun is the lack of documentation. I would not recommend this as your first gun unless you are ready to empty your wallet and your schedule to watch 10 year old tutorials on an already niche gun for a month. Ask me questions if you need input.
by Duy T. on 08/05/2020
"Let me say this, this gun is absolutely amazing! Out of this world amazing! This is my first LCT that I own and it DOES NOT DISAPPOINT! I gotta tell you, the gun is heavy, like real steel heavy so be ready for that.
Pros:
- Heavy
- Amazing quality (Just out of this world)
- Fits Titan Battery 3000 mAh 11.1V (great FPS on full charge)
- Realistic feels
- The real wood is superb!
Cons:
- My only complain would be it's cheap plastic grip because it does not feel good gripping it. Then again, you're wearing gloves so it wouldn't matter. Only takes away its realism. You do have after market parts so it's all good.
Pros:
- Heavy
- Amazing quality (Just out of this world)
- Fits Titan Battery 3000 mAh 11.1V (great FPS on full charge)
- Realistic feels
- The real wood is superb!
Cons:
- My only complain would be it's cheap plastic grip because it does not feel good gripping it. Then again, you're wearing gloves so it wouldn't matter. Only takes away its realism. You do have after market parts so it's all good.
by Conor D. on 03/27/2018
"First Impression: First of all, what a great looking and feeling AK. Very unique design, and the metal/wood quality I'd say is on par with my E&L AK. Put a battery in it and a midcap to test it outside, and it shoots beautifully, I can't wait to take this to a game at my local field, and to Operation Bad Blood this summer.
ANYONE LOOKING FOR MAGS FOR THIS GUN. I can confirm that G&P AK47 mags will fit and feed well in this gun, by that standard, I would say anything that fits an E&L, will fit this gun. I bought a bunch of G&P mags for my E&L a long time ago and they haven't failed me, sometimes they wont fit due to the sides bending out (either quality control or the cold effecting the metal), but a few careful taps with a ballpeen hammer will put the sides back into place without destroying the mag. Over all great magazines with a sturdy construction.
Pros:
Shoots .25 gram bbs pretty darn well out of the box
Hop-up is easy to reach and use.
Works with G&P mags
Actually comes with a Mid-Cap magazine, not a high-cap.
Quality exterior construction, good metal, great looking/feeling wood.
Comes with black muzzle breaker, orange tip is easy to take off and the black one is just as easy to twist on.
Realistic feel and weight (weight could possibly be a con, but I prefer the genuine weight and feeling of an AK).
Very Unique design that incorporates different parts from several AK variants including East German AKs, the Israeli Galil, and the AK 104.
Nice Iron Sights compared to other Airsoft AKs I've held, owned, or used.
Cons:
The dust cover where the battery goes can be a pain.
Folding stock can be a little stiff, but not that bad at all really.
Sling mounts will not accept a traditional, genuine AK sling due to the width of the rear mount and it's placement.
Overall a gorgeous, unique AK variant with high quality exterior parts that shoots well out of the box. If this is in your price range, and you like your AKs, get this, or another LCT.
100% Slav Squad Approved
ANYONE LOOKING FOR MAGS FOR THIS GUN. I can confirm that G&P AK47 mags will fit and feed well in this gun, by that standard, I would say anything that fits an E&L, will fit this gun. I bought a bunch of G&P mags for my E&L a long time ago and they haven't failed me, sometimes they wont fit due to the sides bending out (either quality control or the cold effecting the metal), but a few careful taps with a ballpeen hammer will put the sides back into place without destroying the mag. Over all great magazines with a sturdy construction.
Pros:
Shoots .25 gram bbs pretty darn well out of the box
Hop-up is easy to reach and use.
Works with G&P mags
Actually comes with a Mid-Cap magazine, not a high-cap.
Quality exterior construction, good metal, great looking/feeling wood.
Comes with black muzzle breaker, orange tip is easy to take off and the black one is just as easy to twist on.
Realistic feel and weight (weight could possibly be a con, but I prefer the genuine weight and feeling of an AK).
Very Unique design that incorporates different parts from several AK variants including East German AKs, the Israeli Galil, and the AK 104.
Nice Iron Sights compared to other Airsoft AKs I've held, owned, or used.
Cons:
The dust cover where the battery goes can be a pain.
Folding stock can be a little stiff, but not that bad at all really.
Sling mounts will not accept a traditional, genuine AK sling due to the width of the rear mount and it's placement.
Overall a gorgeous, unique AK variant with high quality exterior parts that shoots well out of the box. If this is in your price range, and you like your AKs, get this, or another LCT.
100% Slav Squad Approved
by Michael R. on 03/17/2018
"
by justin w. on 03/14/2018
"this thing is amazing it shot great out of the box and is so beautiful. The only CON is they give you real wood all metal except the pistol grip is the cheapest plastic you could imagine. I was so disappointed in the grip it kills the realistic feel of the rest of the AK....shame on you LCT
this gun is defiantly worth it I love the way it shoots its beautiful but will need to invest in the real wood grip
this gun is defiantly worth it I love the way it shoots its beautiful but will need to invest in the real wood grip
by s. on 06/03/2020
"So I've been running this gun now for the past few months during our pickup games. Externally, this is likely the most beautiful well crafted piece I have, seriously, LCT does an amazing job on this. I'm leaving a three star review however because the internals are nothing to brag about whatsoever. Infact mine has a weird sort of quirk where I have to switch it back to safe before I can go to semi or back to full from either. Not sure what's going on there but it doesnt bother me that much. Performance wise, you're probably looking at what a CYMA ak can do. While that used to be pretty good back in the day, its 2020. Now your average m4 is coming equipped with etu's, mosfets, and generally better built for performance out of the box compared to the old market standard and they're cheaper too. With this in mind I'd say the internals are good, definitely skirmishable, but outdated to be sure. I wouldn't recommend this gun if you're looking for something amazing out of the box but if you plan to drop some mods in it or just want something that looks and feels near to a real steal ak then absolutley pick up an LCT.
Btw for mag compatibility, so far all my AK mags have fit perfectly in this gun. I mainly run MAG brand ak74 style mid caps, but havnt had problems with anything else I own.
Pros:
10/10 externals
Reliable version 3 gearbox
Real eye catcher
Accurate
Would make any true comrade proud!
Decent rof with a 9.6
Cons:
Dated internals (just my opinion)
There are no 14mm ccw threads on this gun. Just 28 mm threads
HEAVY for its size. Recommend a sling.
Btw for mag compatibility, so far all my AK mags have fit perfectly in this gun. I mainly run MAG brand ak74 style mid caps, but havnt had problems with anything else I own.
Pros:
10/10 externals
Reliable version 3 gearbox
Real eye catcher
Accurate
Would make any true comrade proud!
Decent rof with a 9.6
Cons:
Dated internals (just my opinion)
There are no 14mm ccw threads on this gun. Just 28 mm threads
HEAVY for its size. Recommend a sling.