Tru-Hop AEG Bucking with Spacer by TruSight Airsoft

Features

• Designed to improve accuracy and range with drop in simplicity
• Concave contact patch is the secret behind the TruHops improved performance
• Proprietary material is designed to withstand hundreds of thousands of rounds
• The TruHop includes a concave spacer (color may vary) designed to complement the performance of the bucking
• Compatible with most popular inner barrels
• Works with most common weight of BBs
• Effective in a wide range of temperatures

The Tru-Hop is a high quality, high performance, all weather hop-up bucking designed to significantly boost range and accuracy. This hop-up bucking is installed like any other hop-up bucking on the market and requires zero modification for its use. Additionally, this bucking will give consistent high performance results in a very wide temperature range (-50C to 230C/ -58F to 446F). This means that you can expect the same range and accuracy regardless if you are playing in cold snow or out in a hot desert environment. Lastly, the material used in this hop-up bucking was chosen from an extensive list of options and was identified as the best choice due to multiple physical properties; one of which is the very high durability that allows the Tru-Hop to withstand hundreds of thousands of rounds.

Science Behind Tru-Hop:
The secret to the performance boost lies with the contact patch inside of the Tru-HopTM bucking. The Gen3 and Gen2 contact patches were designed from scratch and then tuned through numerous redesigns and experiments. The end result is a shape that maximizes performance and is backed by hours of testing, logging, and re-testing.

Tru-Hop contact patches have two main advantages:

Increased friction over the top of the BB, and

Muzzle energy retention

This means you can over-hop virtually any weight BB without experiencing signification energy loss. The Tru-HopTM bucking does this by allowing the BB to pass more freely during firing since little hop-up pressure is required. The air loss at the nozzle-bucking interface is therefore reduced and more energy is retained during firing. This translates to farther range at your optimal flight path.

Both generations were designed to boost the accuracy of your airsoft gun. Hours of trial-and-error testing ensures compatibility of the bucking with numerous BB brands. Other bucking features were thoroughly studied as well.

Simply put, every aspect of Tru-HopTM was designed and tested to yield the maximum performance from your airsoft gun.


Compatibility (Gen3 & Gen2)
Some inner barrel requirements must be met due to the shape of the internal contact patch of the Tru-HopTM bucking. We designed the bucking with broad compatibility in mind. However, not all barrels will be compatible. Please ensure that your barrel window meets the minimum dimensions shown below. Ideally the corners of the barrel window should be squared, although we™ve had success with some rounded corner barrels.

Window of Barrel
Tru-HopTM is compatible with Automatic Electric Gun (AEG), High Pressure Air (HPA), and Gas Blow Back (GBB) airsoft replicas using AEG inner barrels. We recommend coating the portion of your your barrel shown above, and the exterior of your Tru-Hop bucking, with a thin film of silicone oil to aid in installation. Tru-HopTM buckings have a 500 1000 round break-in period before maximum performance is achieved.

Manufacturer: Trusight Airsoft

Specifications:

Compatibility: Most Airsoft AEGs and AEG inner barrels
Material: Polymer rubber