LCT M60-004 Replacement Air Nozzle for M60 AEG Machine Guns

"I recently rebuilt my buddy's A&K Masada. The stock plastic air nozzle and hop assembly on these guns are terrible. His Masada had been sitting for years and he wanted a full overhaul and upgrade. Nobody has the A&K o ring aluminum air nozzle available or in stock in the states, so I did some research. A few forums and pages stated that the length of the air nozzle is about the same as an m60 air nozzle. I came across this air nozzle here and gave it a shot. Before installing this into the Masada, I measured the remanence of the stock plastic air nozzle, in which his was split down the center, and measured this LCT air nozzle here with a micrometer and they turned out to be the same length and nearly the same width. I also purchased the WII Tech hop up assemblies, both the upper and the lower that installs onto the lower receiver. It worked out great! Buy this if you are trying to find an aluminum o ring air nozzle for your A&K Masada, as well as the WII Tech hop up assemblies. Yes, those cost a good amount but there is really nothing else out there, and when they are sold, they may not come back in stock for a while or ever.

"I bought a couple of these nozzles for my A&K m60 VN.
They are very nearly the exact same length as the stock nozzle, only being maybe 0.10 to 0.20mm shorter.
It DOES have an internal o ring and fits on standard cylinder heads, not the bore up style cylinder head the a&k m60s come with.
Highly recommend it along with the lonex v2 cylinder head, lonex non ported cylinder, and lonex pom piston head, which u can find on Brillarmory.

"I put one of these in both my M60E4/Mk46 and my buddy's A&K Masada. Lightly bullnosing the nozzle end helps with sealing against bucking lips - the default nearly square end seals like garbage.

Drilling the center hole out to match the OEM nozzle ID massively improves airflow through these, as well.

Solid 4/5. A little more machining and these would be perfect, but they are the only option for M60's and Masada's if you want an O-Ring nozzle.