Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
MAP Discounts 11/25 - 12/6 + Epic Deals and Free Shipping for Orders over $149!

Evike.com Custom Swordfish P90 with Terminator Magazine Conversion Kit (Color: Tan)

6 Customer Reviews

by Marlon M. on 04/25/2020
"Really fun!
One thing is the barrel is not 290mm please fix this.
I believe it's like 247mm like the p90 terminator states. I bought and thigh bore 290mm and it is longer.
Other than that DO NOT buy m4 Mags you won't need them. There are enough BBs if you fill the whole box mag and make sure the m4 mags fills all the way up as well to last you a whole 30-minute game even when playing full auto.
On to the good, this gun is fun and you get people staring asking what is it and even telling you it is intimidating.
The gun doesn't need anything to pay indoor however for outside play it doesn't have much range past around 110ft.
Battery consumption is good a 9.6v NiMh will last you a whole's day worth of playing.
The gun is cheap plastic so keep in mind that it will squeak here and there and if you are wearing a metal lower mask you will scrape it (that is a given though.)
Hopup did not work properly on mine. It went from a good Straight shot to the sky from side to side and nothing in between.
To remove the orange tip you need to remove the metal swordfish part. Do not try and remove it without removing it because there is a clip thing inside the orange tip you need to remove in order for you to be able to screw out the orange tip.
In conclusion, this is an awesome beginner weapon, and if you like the platform as much as I do you can upgrade it to your wallet's limits and always get a better shooting weapon.
I would recommend this p90.
by Christopher L. on 10/14/2017
"
by Michael D. on 12/14/2020
"I purchased this SMG for my gf who loves airsofting, but needed something smaller to game with. We have plenty of BAMF and PTS M4 magazines and didn't feel the need to find a platform that used different magazines.

Out of the box there are several things you will notice. This rifle comes with it's own wall charger and 9.6 NIMH 1100 battery. The charger does not have an LED and the instructions only state not to charge the battery over 5 hours. It is a mini-Tamiya battery and I recommend converting it and the rifle to Deans as soon as possible and using a smart charger. The rifle comes with a brass barrel and a cheaply made plastic bucking. These should be changed out as soon as possible as well (I recommend a SS Angel Customs 6.03 inner barrel and a Maple Leaf bucking).

With all of that said and done, the rifle is incredibly fun, will shoot like a laser from 200' and is surprisingly weighty for it's size. I read that some customers had issues with the mag well on the conversion, but the BAMF and PTS magazines seem to work really well for it.

PROS:
-great build quality, FN licensed
-comes with a battery and charger
-plenty of picatinny rails for accessories
-great smg for smaller folks
-reliable and accurate
-OEM hi-cap magazine fits snugly and carries enough ammo for a full auto game easily

CONS:
-removing the orange tip requires removing the Swordfish conversion first
-will need a 1" 14mm CCW adapter to install a tracer or most flash hiders
-the outer barrel is only "half" threaded to install a flash hider or tracer and is VERY malleable! Be ultra careful and use a drop of oil to install any aftermarket tracers!
-moderate to advanced knowledge of the inner workings of AEG rifles in order to perform upgrades. If you have any doubts, have it done professionally
by Michael B. on 07/01/2018
"I just fielded the P90 today and have had it for about a week. The build feels pretty sturdy. The polymer body doesn't feel cheap. It's heavier than I expected. I've already ordered a sling mount for it. I used it with an 11.1 lipo and the rate of fire is excellent. I used a Matrix tri cell and it fit just perfectly and snug. There is not a lot of room for a large battery.

Here some cons:
The magazine lock is very sensitive. If you accidentally press it a little your mag will drop out and you'll lose a lot of BBs from the box.
The stock hop-up is very cheap made of cheap plastic. Rotating the hop-up did not do any good or change the hop at all. I immediately R-hopped the barrel and did the eraser mod to improve the hop-up. Now my range is about 200 ft. with a flat trajectory. I'll be looking to upgrade the hop-up soon.

Overall its a nice gun for CQB or engagement in mid-range. I would give it an over all rating 4/5 stars for the build. The hop-up I would give 1/5 stars.
by Bryce I. on 12/25/2017
"I made the purchase and am very pleased with it, it shoots great and has reasonable spread (it'll get the job done just don't expect a compact sniper.) the only complaint i have is not all M4 mags work for it their is a piece within the mag well that prevents even the default mag from resting comfortably in the mag well and at times keeps it from going in all together. i believe a simple grinding job to make the piece of plastic smaller so it doesn't hit the mags will result in a fix but I've yet to try it myself. overall I'm happy with my purchase.
by Michael B. on 06/28/2018
"I was really excited to get this. It was heavier than I expected. The build quality is pretty good for the body and the rails. I was expecting a little more room in the stock but it was still a little tight to get the battery to fit. The description says it is "Fully licensed FN Herstal trademarks". I was expecting some labels and actual marking that said FN Herstal. Nope. Just sais made in China. There are no FN Herstal markings what so ever. So don't expect that. I don't really know what they meant with they said: "Fully licensed FN Herstal trademarks".

It was shooting slightly over 400fps w/ 0.2g BBs. I was happy about that. I wasn't happy about the range. Even by turning the hop up all the way up it didn't make a difference. The hop up is made of cheap plastic. The hop up arm is very flimsy. The first thing I did was to upgrade the barrel and put an R-hop on it. I had an old 300mm Promy 6.03 barrel. The stock nub for the hop up was non-existent. When I first took out the barrel and turned the hop up all the way there was no change in the inside of the bucking. After I put the R-hop, only then I was able to over hop the BB. My next upgrade will be to change the hop-up unit completely.

I was happy about how easy it was to remove and exchange the barrel. I haven't removed the spring, but it looks pretty accessible too. I am getting pretty good rate of fire. I have an 11.1 lipo attached. I would say the effective range is 200 ft. I have not fielded it yet, but I will update my review if there is anything surprising after fielding the P90.

Just by looks I would give it 8/10
Quality of internals 6.5/10