GEISSELE Automatics Gas Block Pin Punch Set

Features

• Steel construction
• Made for specifically for the removal or installation of the 0.078" roll pin for the gas tube of an AR-15/AR-10
• Makes installations of gas rods for direct impingement setups a breeze

The Geissele Gas Block Pin Punch Set is made specifically for the removal and installation of the 0.078" roll pin that secures the gas tube to the gas block of an AR-15/AR-10. Removal of a rusted-in gas block roll pin has always been a challenge since there are no commercial pin punches in 0.078" diameter. Additionally, 1/16" (0.062") punches have a tendency to bend and very few starter punches are available in 1/16" diameter.

The Geissele Gas Block Pin Punch Set makes gas block work a whole lot easier. The first punch to grab when removing the roll pin is the Starter Punch. This is the punch with the long, tapered end. The long taper is much more resistant to bending and buckling than the straight shank of the Pin Punch. Use the Starter Punch to get the roll pin moving. Then, use the Pin Punch to drive the roll pin out completely. The Geissele Gas Block Pin Punch Set is made from properly hardened and tempered 01 tool steel. The Gas Block Pin Punch Set is considered a consumable item, meaning they will eventually wear out and will need to be replaced. Geissele will not replace tools damaged from misuse or normal wear and tear.

Manufacturer: GEISSELE Automatics

Specifications:

Material: Steel

About Geissele Automatics

THE GEISSELE MISSIONTo prove, every day, that the Golden Rule works: "Do to others as you would have them do to you" Luke 6:31."We Manufacture Confidence" FOR THE COMPETITORGeissele Automatics was established in 2004 as a manufacturer of trigger mechanisms for the AR15 rifle. Our first trigger, the Hi-Speed National Match, was designed by our Founder, Bill Geissele, for CMP and NRA Hi-Power Rifle competition.FOR THE WARFIGHTERAlthough designed for target shooting, the Geissele Hi-Speed trigger was found by the U.S. Military to have applications in semi-automatic sniper weapons. In 2005 Geissele Automatics received a request from the Department of Defense: "Can you build us a select-fire trigger that is as good as your Hi-Speed?" In response, Bill designed the Geissele Super Select-Fire trigger (SSF). After rigorous testing the SSF was adopted by entities in the U.S. Special Operations community and has become their trigger of choice for M4 carbine based weapons.FOR THE PROTECTORA derivative of the SSF trigger was developed to meet the needs of law enforcement and civilians who do not need select-fire capability. This trigger, the Super Semi-Automatic (SSA,) combines stellar performance with the safety, reliability and forgiveness for which 2 stage triggers are known.