Perun V2 Hybrid Low Resistance MOSFET for Tokyo Marui Spec Version 2 AEG Gearboxes (Type: Front Wired)

"Saved my built TR-1 worth about $1k from turning into an IED because my battery overheated.

20/10

"The best mosfet on the market. The fact it's one solid board without the top plate means it fits in most gearboxes, maybe even all I haven't seen one it wouldn't fit in without the need to remove material from the top shell to fit it. Easy to install, however it didn't come with an instruction manual there is a link to an installation video if you can't figure it out. I'll be buying multiple for all my gearboxes. Couldn't recommend enough.

"Stop looking, this is the one. Installed a few and it significantly improves your AEG in many ways. 10/10 would recommend for all v2 AEGs.

"I've installed 4 in the following rifles:
- Magpul Masada
- G&G Cm16 Raider (the OG version)
- Elite Force Limited Edition MP5
- Krytac CRB-M (no gearbox modifications required)

All installs wen great, running 12:1 and 13:1 gears on all, accept for the Krytac. The Krytac has stock internals and the Perun, and it is an absolute beast.

Unless you care about having an app, this is the mosfet to get, I cannot recommend it enough. The price is also perfect.

"Just buy it. You don't need an app for your airsoft gun. Get a Perun. It's better.

"Dropped right into my A&K stubby m4 (delta).
No gearbox modification needed, and easy to work with.

12:1 SHS gears
Kratos piston
MAXX Piston head and nozzle
30k 22TPA motor

And with now this beatiful mosfet I'm hitting snappy semi and my rof is sitting at 32 RPS on the chrono

This mosfet is amazing, easy to program VIA selector and trigger pool, no need for a stupid blulink like the GATES, not having to deal with annoying laggy apps, just easy fast programming here baby!

Its strong and good feeling, doesnt feel like a cheap motherboard that can break easily, and the soder points are clean and nice.

This does come in deans, so if you don't have any deant plugs laying around you might want to pick one up or a dean to Tamiya connector.


With the price point of this mosfet and having pretty much every capability or a Gate or Jefftron this is a no Brainer.

Out of all the mosfets I own and installed this is by far my new favroite, best bang for the buck!

If you were on the fence about this mosfet DONT BE !!!

Perun, you earned yourself a loyal customer!

"I got this for my VFC saber, and out of the box, the gun is already really good, but with this mosfet... its a whole new beast. I run my 11.1 1200mah pretty much all day and the rate of fire and response is out of this world. It's just worth every penny

"Amazing mosfet. picked one up for a 13:1 ssg build, and it absolutely delivered.
Features are on par with the gate titan, jefftron leviathan, btc spectre, etc but for about half the price. programmability is a breeze, and customer support is great.
Installation was super easy and straight forward. Having installed numerous microswitches and a gate aster, this installation was leagues above all of them in terms of ease and clear instructions.
it also includes plenty of stickers for programming, diagnostics, and for decorating your gun. the diagnostics themselves are very concise with decipherable LED's, beeps, and vibrations. very easy to follow.
only gripe is that it doesn't have an app or anything for programming, but still amazing mosfet for the price. i also like how you don't have to buy a separate ripoff programming component (i'm looking at you, gate), and comes with everything as-is.
super, super great stuff. i'll definitely be picking up more of these in the future.

"Honestly it fit really good into my gun (G&G CM16 R8-L)there was no need for any in shell modification and was my first time taking apart a gun was very simple installation on (5/10 difficulty) the only thing I had to do was modify my plate sticker cause as I move it the sticker would pop off the quality is great and compact.only downside was I had to Remove the solder and redo do it after sliding it through my stock sense the deans would fit. Overall quality and functionality though is a 10/10 especially for the price.

"Bought this for my Umarex Mp5 by vfc with Avalon gearbox.
Paired with 13:1 gears, stock vfc Avalon torque motor and 11.1 50c lipo battery. Results are astounding with trigger response, rof, and is efficient. Install and programming is very easy, just go on YouTube. The precocking and active break is where this unit really shines. Definitely a cheaper alternative to the gate titan and jefftron leviathan.

"Extremly good Mosfet, I fit it without any problems on my Lancer Tactical LT-19 Proline gearbox, and it was more easy than I thought at first.

The wire is pretty flexible so I had any issues fittting in on the gearbox, grip or stock, and there's plenty of wire to plug your battery with ease!

And for the programming, there's videos on Youtube than explain how to configurate the differents modes and what it does any of them, definitely a solid upgrade.

"The Perun V2 Hybrid is absolutely fantastic

This mosfet is quite literally the best 65 dollars I have ever spent in airsoft. For my first upgrade project I took a Matrix Sportline and completley overhauled the internals. Gears, compression, spring, hop, motor, barrel- the whole works. The most important thing I would get is a mosfet, and I was left with a choice. Gate vs. Perun. Trying to stay within my budget best I can, Perun was the lower price and therefore my first choice. After watching various YouTube demos and reviews, I was convinced. I bought it along with some other parts, and it came a few days later. The box was nice and organized, and the Hybrid came in an anti-static bag- nice touch. A couple stickers in the box, a sticker for your buffer tube with the programming, and a manual with simple instructions and a link to an install video and full PDF manual. Installing it was a simple screw and channeling the wires, and then I could test it with the magnet holder on the trigger and the sector gear spinning freely. All of the sensors worked flawlessly, and it alerted me when things weren't right. Assembling my gun completely and the mosfet had fantastic full auto and semi auto cycling, and it keeps my trigger pull crisp and senstive.

TL:DR
This mosfet offers extreme value with incredbile ease of use in programming. Its easy to install and requires no calibration besides trigger sensitivty, precock, and active breaking levels.

I highly recommend the Hybrid V2 and it should be your next mosfet!

"To be honest I've shouldve tried this mosfet out along time ago instead of spending alot on the gate titan advance.

For a low price mosfet I would say it is somewhat on par to a gate titan. Has all the functions I could want in a 30rps ssg build.

This mosfet can take higher rps builds as well.

Installation was easy af.

I would recommend this and will definitely buy more for future builds.

Also the best part about programming is that you don't need a phone device or pc. All the programming is on the fly by just simple flicks of the fire selector and the trigger.


Well done Perun!

"Fantastic Mosfet! I was going to get a Gate Titan, but decided to try this because I’d the significantly lower price. It’s great. Instal was super easy. It’s got a good variety of features. And, as I said, it’s super cheap. I don’t see a reason not to get it.

"Works perfectly in G&G Raider GR16. Paired this with upgraded piston, spring guide rod, 8mm bearings, stock gears (18:1) and 11.1v 2200mAh 50c lipo & hi-speed motor (will change to hi-torque soon). My AEG is a whole new beast. Not as insane as a DSG build but I'm very pleased with it.